Author Topic: 25 Pounder Portee 1/35  (Read 307 times)

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
25 Pounder Portee 1/35
« on: November 08, 2026, 02:35:55 PM »
Sounds like a perfect Whiffer... well in this case it is not. Well, sort of is.
As the 2 Pounder and 6 Pounder had all been successfully portee mounted, clearly somebody thought why not the 25 pounder.
Project started in 1942 and was abandoned (wisely I would say) in 1943. There are other trials using more suitable trucks like Mack, but none saw service. Again probably wisely.




So not really a what if, but nonetheless, weird enough to warrant a build

Now, I am one of those see a neat picture you have to build it type of guys
I think I posted a picture of the beginnings of this at some stage in the past. Now it is back on the bench.
using the ICM Fordson WOT6 and the Bronco 25 Pounder kits. I designed up the ramps in 3D and had them printed by a buddy with a Resin printer.




The gun shield fold down is in the Direct Fire mode on reference photo and it has been nagging me the entire time. I think it will need to be altered on my 25 Pounder so my head does not explode.  ;)

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 25 Pounder Portee 1/35
« Reply #1 on: November 08, 2026, 04:40:06 PM »
Interesting.  :smiley:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Has a life outside of What If & wishes it would stop interfering!

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: 25 Pounder Portee 1/35
« Reply #2 on: November 08, 2026, 10:19:04 PM »
Nice work there and an interesting and unusual subject.  :smiley:
Pass the razor saw, there is work to be done!

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: 25 Pounder Portee 1/35
« Reply #3 on: November 09, 2026, 04:14:37 AM »
A very impressive project!  :smiley: :smiley:

... The gun shield fold down is in the Direct Fire mode on reference photo and it has been nagging me the entire time. I think it will need to be altered on my 25 Pounder so my head does not explode.  ;)

A good call. The firing platform is angled nicely to deflect any overhead obstacles up and over. But, fully erected, the gun shield is perfectly positioned to 'grab' any branches, low-hanging wires, etc.
It's all fun and games until someone chews through the tree with the eyrie on top.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: 25 Pounder Portee 1/35
« Reply #4 on: November 09, 2026, 04:50:14 AM »
You are off to a great start with this project.  Sure does help to have "friends" that print 3D stuff for you.  :smiley:
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline raafif

  • Is formally accused of doing nasty things to DC-3s...and officially our first whiffing zombie
  • Whiffing Insane
Re: 25 Pounder Portee 1/35
« Reply #5 on: November 09, 2026, 06:06:27 AM »
 :smiley: Great idea !  Back in the day I built a 2Pdr portee for Nth Africa (cut-down cab) on the Italeri Bedford.  Got wrecked in a move but I still have it to restore.

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: 25 Pounder Portee 1/35
« Reply #6 on: November 15, 2026, 03:38:27 PM »
Not much to report as it is in the final stages of the stay in the paint shop.

The 25 Pounder Shield moved to the lowered state, plus now under a lick of paint for all the components and in place for a test fit.



For that time period 1942-43 the "Standard" British colour was SCC 2 Dark Brown, so the thought process was that this is an experimental establishment so most things were gathered up from exiting sources, or new from factory lines.
Everything is a similar colour, getting variation is a bit hard so we shall see how it turns out once all the bits and bobs are painted.

Offline Kerick

  • Reportedly finished with a stripper...
Re: 25 Pounder Portee 1/35
« Reply #7 on: November 15, 2026, 08:12:45 PM »
Very interesting combo. Carry on!
Is that a fender in progress sitting on top of the wheel of the gun?

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 25 Pounder Portee 1/35
« Reply #8 on: November 15, 2026, 09:39:59 PM »
The photo shows a good variation in the basic brown tone, so that's good!  :smiley:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Has a life outside of What If & wishes it would stop interfering!

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: 25 Pounder Portee 1/35
« Reply #9 on: November 16, 2026, 01:51:32 PM »
The photo shows a good variation in the basic brown tone, so that's good!  :smiley:

Thanks, yeah, sort of works ok.

Is that a fender in progress sitting on top of the wheel of the gun?
Sort of, looking at the photos it is part of the tie down apparatus for the gun. These plates are placed on the wheel and chained down, to stop bouncing I suppose

So calling this one close to done. I think I have to do a retainer on the Gun wheel tie down plates to stop the chains from moving off, and then that should do it.






Reasonably happy with this, the way it worked out
Might even take it to the Club Annual Comp in a couple of weeks

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 25 Pounder Portee 1/35
« Reply #10 on: November 16, 2026, 05:56:39 PM »
Looks good to me!  :smiley: :smiley:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Has a life outside of What If & wishes it would stop interfering!

Offline Kerick

  • Reportedly finished with a stripper...
Re: 25 Pounder Portee 1/35
« Reply #11 on: November 16, 2026, 11:01:44 PM »
Excellent combination of kits! Well done!

Offline raafif

  • Is formally accused of doing nasty things to DC-3s...and officially our first whiffing zombie
  • Whiffing Insane
Re: 25 Pounder Portee 1/35
« Reply #12 on: Yesterday at 06:03:45 AM »
 :smiley: Great job !
Those "plates" on the 25Pdrs wheels look more like sand-bags which will be needed to help stop the gun rolling back on recoil .... or maybe for the crew to kneel on in the hot sand ;)

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: 25 Pounder Portee 1/35
« Reply #13 on: Yesterday at 11:46:09 PM »
Great subject and, as always, an outstanding build. Bravo!  :-* :smiley:
Pass the razor saw, there is work to be done!