Author Topic: 25 Pounder Portee 1/35  (Read 195 times)

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
25 Pounder Portee 1/35
« on: November 08, 2026, 02:35:55 PM »
Sounds like a perfect Whiffer... well in this case it is not. Well, sort of is.
As the 2 Pounder and 6 Pounder had all been successfully portee mounted, clearly somebody thought why not the 25 pounder.
Project started in 1942 and was abandoned (wisely I would say) in 1943. There are other trials using more suitable trucks like Mack, but none saw service. Again probably wisely.




So not really a what if, but nonetheless, weird enough to warrant a build

Now, I am one of those see a neat picture you have to build it type of guys
I think I posted a picture of the beginnings of this at some stage in the past. Now it is back on the bench.
using the ICM Fordson WOT6 and the Bronco 25 Pounder kits. I designed up the ramps in 3D and had them printed by a buddy with a Resin printer.




The gun shield fold down is in the Direct Fire mode on reference photo and it has been nagging me the entire time. I think it will need to be altered on my 25 Pounder so my head does not explode.  ;)

Online Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 25 Pounder Portee 1/35
« Reply #1 on: November 08, 2026, 04:40:06 PM »
Interesting.  :smiley:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: 25 Pounder Portee 1/35
« Reply #2 on: November 08, 2026, 10:19:04 PM »
Nice work there and an interesting and unusual subject.  :smiley:
Pass the razor saw, there is work to be done!

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: 25 Pounder Portee 1/35
« Reply #3 on: November 09, 2026, 04:14:37 AM »
A very impressive project!  :smiley: :smiley:

... The gun shield fold down is in the Direct Fire mode on reference photo and it has been nagging me the entire time. I think it will need to be altered on my 25 Pounder so my head does not explode.  ;)

A good call. The firing platform is angled nicely to deflect any overhead obstacles up and over. But, fully erected, the gun shield is perfectly positioned to 'grab' any branches, low-hanging wires, etc.
It's all fun and games until someone chews through the tree with the eyrie on top.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: 25 Pounder Portee 1/35
« Reply #4 on: November 09, 2026, 04:50:14 AM »
You are off to a great start with this project.  Sure does help to have "friends" that print 3D stuff for you.  :smiley:
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline raafif

  • Is formally accused of doing nasty things to DC-3s...and officially our first whiffing zombie
  • Whiffing Insane
Re: 25 Pounder Portee 1/35
« Reply #5 on: November 09, 2026, 06:06:27 AM »
 :smiley: Great idea !  Back in the day I built a 2Pdr portee for Nth Africa (cut-down cab) on the Italeri Bedford.  Got wrecked in a move but I still have it to restore.

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: 25 Pounder Portee 1/35
« Reply #6 on: Yesterday at 03:38:27 PM »
Not much to report as it is in the final stages of the stay in the paint shop.

The 25 Pounder Shield moved to the lowered state, plus now under a lick of paint for all the components and in place for a test fit.



For that time period 1942-43 the "Standard" British colour was SCC 2 Dark Brown, so the thought process was that this is an experimental establishment so most things were gathered up from exiting sources, or new from factory lines.
Everything is a similar colour, getting variation is a bit hard so we shall see how it turns out once all the bits and bobs are painted.

Offline Kerick

  • Reportedly finished with a stripper...
Re: 25 Pounder Portee 1/35
« Reply #7 on: Yesterday at 08:12:45 PM »
Very interesting combo. Carry on!
Is that a fender in progress sitting on top of the wheel of the gun?

Online Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 25 Pounder Portee 1/35
« Reply #8 on: Yesterday at 09:39:59 PM »
The photo shows a good variation in the basic brown tone, so that's good!  :smiley:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."