Author Topic: Canadian interceptor  (Read 19536 times)

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #50 on: November 06, 2026, 09:59:27 PM »
The seats are assembled and installed! What a pain! Some of the etched parts were so tiny I left them off and no one will notice. The larger parts do look good now that they are in place. If I had looked more closely when assembling the fuselage I would have made more effort to box in the cockpit better. There are some gapping holes behind each seat and along the sides. Oh well, too late now. I still have to scratch up the rest of the refueling probe. Progress.

Online Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Canadian interceptor
« Reply #51 on: November 06, 2026, 10:01:24 PM »
And progress is good!  :smiley:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #52 on: November 07, 2026, 10:23:55 AM »
Well, I almost screwed up. I swiped the retracted air to air refueling probe from the Revell GR.4 kit. It comes with the retracted and deployed probes so I felt I could borrow the retracted one. I was looking up photos of the set up assuming the GR and F series were the same. Not so! The F series probe in the retracted position is flush with the surface on the opposite side of the fuselage. So I had to cut away the stolen part and sand it off. I was about to try and recreate the extended pipe and fitting where it entered the fuselage. I’m glad I didn’t waste any more time on that or start painting it!
But the cockpit is done with the last of the paint applied. Now it’s masking the canopy time and stick it on so Air Superiority Blue can begin.

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Canadian interceptor
« Reply #53 on: November 07, 2026, 09:28:23 PM »
Great build - having served through the Tornado F3 years, I always thought that it (and the standard GR Tornado) would have looked better if stretched somewhat.  :smiley:
Pass the razor saw, there is work to be done!

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #54 on: November 08, 2026, 01:59:34 AM »
I agree. That nose on the GRs is pretty pugnacious. That and the fact that stretching for the F.3 actually made it faster. So I wonder if this stretch would make it faster still?

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Moderator
  • Patterns? What patterns?
Re: Canadian interceptor
« Reply #55 on: November 09, 2026, 04:21:19 AM »
Sounds highly promising! Looking forward to seeing that Air Superiority Blue application under way  :smiley: :smiley:
It's all fun and games until someone chews through the tree with the eyrie on top.

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #56 on: November 10, 2026, 11:03:56 AM »
Here's the cockpit with the seats installed. The area around the cockpit has been painted black. The air to air refueling probe has been removed and saved for the future. I finally figured out the F.3 probe is flush with the fuselage and on the other side. I'll install the canopy next.

« Last Edit: November 10, 2026, 11:07:14 AM by Kerick »

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: Canadian interceptor
« Reply #57 on: November 11, 2026, 05:28:27 AM »
Oh very neat work  :smiley:

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Moderator
  • Patterns? What patterns?
Re: Canadian interceptor
« Reply #58 on: November 11, 2026, 06:02:54 AM »
Indeed. Those seats look spectacular!

And good catch on the F3's refuelling probe  :smiley:
It's all fun and games until someone chews through the tree with the eyrie on top.

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #59 on: November 11, 2026, 09:13:50 AM »
Thank you!
The Brassin seats are very nice and look very good just painted. The etch is over the top with tiny parts you’ll never see.
I suppose I could have included something in the backstory about the F.4 being made from unused GR airframes with a whole new nose and super stretched fuselage. That could have explained the probe. Now if I had really planned ahead properly I could have lengthened the wings like the F-111B. A little too late for that now.
Hopefully primer on the main frame tonight. It’s been a fairly busy day.

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #60 on: November 11, 2026, 01:38:43 PM »
Primer has been applied! Major accomplishment!
It will need a little sanding. Looks like orange peel right now. Tomorrow will be a busy day. Dr appointment in the morning and Veterans Day appointment at my niece’s children’s school. I put the old uniform on and sit in on the program they have with a bunch of other vets. A few moms and dads plus us old farts. The kids really like it.

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Canadian interceptor
« Reply #61 on: November 11, 2026, 03:29:35 PM »
The build is looking spectacular.  Hope the Veterans Day event goes well!  :smiley:
Pass the razor saw, there is work to be done!

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #62 on: November 13, 2026, 03:38:24 AM »
First coat of paint is on. Looked ok this morning. I’ll get back to it later today and see if it’s still good. It’s Vallejo over Army Painter primer. All acrylic paint. Fingers crossed.

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #63 on: Yesterday at 08:09:14 AM »
The second color is on! I painted the darker shade first then masked it off with silly putty. The paints are from Vallejo American aircraft color set.



I've over sprayed with clear gloss acrylic since this pic was taken. I'll try decals tonight.

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Moderator
  • Patterns? What patterns?
Re: Canadian interceptor
« Reply #64 on: Yesterday at 08:45:08 AM »
... I've over sprayed with clear gloss acrylic since this pic was taken. I'll try decals tonight.

That is looking fantastic! And love your camo pattern choice  :-*

Now, the big question: Is 24 hours going to enough? It looks like you are all but done. But let me know if a slight extension is needed. (To be so close to finished on a big project only to miss the deadline by a day would be maddening!)
It's all fun and games until someone chews through the tree with the eyrie on top.

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #65 on: Yesterday at 11:37:54 AM »
Real life has been in the way all during this project. Another day or two would be helpful. Does anyone else need a bit more?

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Canadian interceptor
« Reply #66 on: Today at 02:44:05 AM »
Very cool and looking like the Tornado alway should have.  I’m smitten!  :-*
Pass the razor saw, there is work to be done!

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Moderator
  • Patterns? What patterns?
Re: Canadian interceptor
« Reply #67 on: Today at 03:02:35 AM »
Real life has been in the way all during this project. Another day or two would be helpful. Does anyone else need a bit more?

Real life is waaaay over-rated ... there are already enough obstacles to completing a successful whif!   :icon_nif:


Two more days it is, then. Our new (and final) deadline will be the end of Tuesday, 17 November 2026 PST.  :D
It's all fun and games until someone chews through the tree with the eyrie on top.

Offline Kerick

  • Reportedly finished with a stripper...
Re: Canadian interceptor
« Reply #68 on: Today at 04:34:53 AM »
Thank you so much!  I will get this done one way or another!