Author Topic: Dear Model Company, I would like you to release a kit of...  (Read 72023 times)

Offline Frank3k

  • Excession
  • Formerly Frank2056. New upgrade!
    • My webpage
Re: Dear Model Company, I would like you to release a kit of...
« Reply #330 on: December 08, 2015, 01:11:07 AM »
Knowing Hobbyboss, the SEAL DPV will have delicate, weight carrying parts with tinny connecting pins, vague instructions and a sheet of PE full of microscopic parts that will be invisible after construction. One tiny PE part will be critical to the stability of the model, too.


Offline DFZ

  • Bitten by the Viper...
Re: Dear Model Company, I would like you to release a kit of...
« Reply #331 on: December 09, 2015, 01:35:00 AM »
Dear Tamiya model company... or anyone else for that matter!
How about an up-to-date F-16E/F/I variant in 1/72?
We've got the Hasegawa and Kinetic F-16I, but the E/F variants have been forgotten in this scale... >:(
And how about an accurate YF-23? The F-23A would be even better but i'd be happy with a good 1/72 YF...
"Stick and stones may brake some bones but a 3,57's gonna blow your damn head off!"

Offline Zaskar24

  • Newly Joined - Welcome me!
Re: Dear Model Company, I would like you to release a kit of...
« Reply #332 on: January 11, 2016, 06:51:00 AM »
I know that I would buy the following in 1/35 plastic if they were produced.

WWII era:
All of the American ones mentioned: T29, T30, T32, T34, etc.
T26E5 "Jumbo" Pershing that was going to be used for the invasion of the Japanese Home Islands.
M38 Wolfhound Armored Car.
A30 Challenger tank.
A43 Black Prince tank
A33 Excelsior tank.

Cold War era:
T92 light tank
Caernarvon tank
Conway tank destroyer
Saracen

Modern era:
Israeli Namer with Samson 30 mm RCWS option
Turkish Tulpar IFV
Turkish Altay MBT
ASCOD Pizarro/Uhlan IFV (I know Nimix out of Spain has a resin version)
Italian Dardo IFV
ROK K21 IFV
ROK K2 Panther MBT
Indian Arjun and Arjun MKII MBT
Jordanian Falcon Turret conversion or better yet complete plastic kit based on the demonstrator

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: Dear Model Company, I would like you to release a kit of...
« Reply #333 on: January 11, 2016, 10:48:10 AM »
I know that I would buy the following in 1/35 plastic if they were produced.

WWII era:
All of the American ones mentioned: T29, T30, T32, T34, etc.
T26E5 "Jumbo" Pershing that was going to be used for the invasion of the Japanese Home Islands.
M38 Wolfhound Armored Car.
A30 Challenger tank.
A43 Black Prince tank
A33 Excelsior tank.

Cold War era:
T92 light tank
Caernarvon tank
Conway tank destroyer
Saracen

Modern era:
Israeli Namer with Samson 30 mm RCWS option
Turkish Tulpar IFV
Turkish Altay MBT
ASCOD Pizarro/Uhlan IFV (I know Nimix out of Spain has a resin version)
Italian Dardo IFV
ROK K21 IFV
ROK K2 Panther MBT
Indian Arjun and Arjun MKII MBT
Jordanian Falcon Turret conversion or better yet complete plastic kit based on the demonstrator

Ditto!

Offline upnorth

  • Distorting a reality near you.
  • Reinvented Austria and the Stuka....Now what?
Re: Dear Model Company, I would like you to release a kit of...
« Reply #334 on: April 02, 2017, 03:16:14 PM »
Given Amodels' current leaning for commuter and corporate types in 1/72, I'd like to see the following from them in 1/72:

Dornier 228 (The Revell one is buildable but toylike in many ways)

Dornier 328

Saab 340

HFB-320 Hansa Jet

HS-125 family

Honda HA-420 HondaJet



Pickled Wings, A Blog for Preserved Aircraft:
http://pickledwings.wordpress.com/

Beyond Prague, Traveling the Rest of the Czech Republic:
http://beyondprague.wordpress.com/

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Dear Model Company, I would like you to release a kit of...
« Reply #335 on: April 02, 2017, 04:18:47 PM »
Dornier 228 (The Revell one is buildable but toylike in many ways):

It can be made to look good though:









Dornier 328:  kind of a model kit:




Saab 340:




HFB-320 Hansa Jet: 



HS-125 family:



Honda HA-420 HondaJet:  No 1/72 that I am aware of but EBBRO are supposedly doing a 1/48 one:


« Last Edit: April 02, 2017, 04:21:09 PM by GTX_Admin »
All hail the God of Frustration!!!

Offline Retired In Kalifornia

  • Earliest "Realistic" Art Of Mine Rendered In 1997
Re: Dear Model Company, I would like you to release a kit of...
« Reply #336 on: October 29, 2018, 10:19:17 AM »
- > A GOOD 1/72 Scale Macchi C.200 injected plastic kit series (AML's though OK still doesn't cut it)

- > A Whole Lotta pre & WWII Italian aircraft types not yet in plastic or resin.
- > A 1/72 Scale AVRO Manchester injected plastic kit series ala the near impossible to find Planet Models resins (Airfix told me they'll "never" do that  :icon_crap: )

- > Whole bunch other 1/72 scale airplane subjects I'd have to prioritize but for now would settle for a reissue of the Ki-21-IIb that's also near impossible to find!



Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Dear Model Company, I would like you to release a kit of...
« Reply #337 on: November 01, 2018, 01:14:00 PM »
Still, did I say still ? ? ?     Waiting for 1/72 B-15.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Dear Model Company, I would like you to release a kit of...
« Reply #338 on: December 07, 2018, 08:33:52 AM »
How about a 1/72 and 1/48 Learjet 25?  in 1/48, either as a stand-alone kit or as a conversion kit for either the Testors/IMC/et al. Learjet 24 or the Hasegawa Learjet 35/36.  If you really wanted to do a full range, have both the early version with the oval windows and the later version with the rectangular windows.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Dear Model Company, I would like you to release a kit of...
« Reply #339 on: December 08, 2018, 03:53:39 AM »
Hmmm...Learjet 25 with cabin replaced by weapons bay and a pair of missiles...
All hail the God of Frustration!!!

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
« Last Edit: December 13, 2018, 05:27:19 PM by finsrin »

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Dear Model Company, I would like you to release a kit of...
« Reply #341 on: December 13, 2018, 04:33:38 PM »
Still waiting for my CH-53D in 1/35, Mr Model Companies! ::)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
    • SketchUp 3D Warehouse - My Digital Models
Re: Dear Model Company, I would like you to release a kit of...
« Reply #342 on: December 13, 2018, 08:07:06 PM »
Quote
Still waiting for my CH-53D in 1/35, Mr Model Companies! ::)

There was an attempt made to produce a resin 1:35th scale CH-53/MH-53 kit many years ago.  Mostly hype but a lot of people were dropping money on pre-ordering the kit in hopes of getting in before the price and demand jumped.  Then it all folded up and disappeared like vapor ware and politician's promises.  A shame too as they were offering the Pave Low version as the first kit in the product line. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Dear Model Company, I would like you to release a kit of...
« Reply #343 on: December 14, 2018, 02:22:10 AM »
That was NightFlight Models wasn't it?  I'm kind of surprised Trumpeter haven't released one given they have done a bunch of other helicopters in 1/35.
All hail the God of Frustration!!!

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
    • SketchUp 3D Warehouse - My Digital Models
Re: Dear Model Company, I would like you to release a kit of...
« Reply #344 on: December 14, 2018, 02:09:11 PM »
@Greg - yeah, probably was NightFlight Models, the name alone should have been a tell as to the whole thing being a bit dodgy from the start.  A real 'fly by night' operation.
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg