Author Topic: Eurofighter Typhoon  (Read 14249 times)

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Eurofighter Typhoon
« on: September 22, 2013, 01:23:38 PM »



Spear 3 loadout anyone?
kwyxdxLg5T

Offline ysi_maniac

  • I will die understanding not this world
Re: Eurofighter Typhoon
« Reply #1 on: September 23, 2013, 05:07:37 AM »
Eurofighter with F-18 wings





Offline ysi_maniac

  • I will die understanding not this world
Re: Eurofighter Typhoon
« Reply #2 on: November 20, 2013, 01:10:37 AM »
EuroEagle. Not to scale, wings must be scaloramed


Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Full Member
  • Stylishly late...because he was reading comics
Re: Eurofighter Typhoon
« Reply #3 on: November 20, 2013, 02:09:09 AM »
These are sharp YSI!  :-*
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Online finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Eurofighter Typhoon
« Reply #4 on: November 20, 2013, 02:59:37 AM »
Dang,,, those are looking good.  :)
I'd say "EuroEagle. Not to scale, wings could be scaloramed"      Can tinker with wing size or leave as is !

Offline ysi_maniac

  • I will die understanding not this world
Re: Eurofighter Typhoon
« Reply #5 on: November 20, 2013, 03:17:48 AM »
^^^^
thanks for your correction. :) ;)

Offline LemonJello

  • MARPAT Master
  • Member number 100...WooHoo!!!
Re: Eurofighter Typhoon
« Reply #6 on: December 10, 2013, 09:37:44 PM »
Bored the other night, I was running random searches on eBay and ran across a couple of 1/48 kits of this plane and now I'm considering a forward-swept wing Eurofighter as a possible project.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #7 on: June 09, 2014, 08:13:40 AM »
Great masking/paint job:






All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #8 on: June 09, 2014, 08:22:21 AM »
Has anyone released a kit or conversion with the Conformal fuel tanks?




All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #9 on: June 09, 2014, 08:22:44 AM »
I like this one:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #10 on: June 09, 2014, 08:27:29 AM »
One found online:



All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #11 on: June 09, 2014, 08:31:15 AM »
I would like to do a Typhoon in a scheme such as this:

« Last Edit: June 09, 2014, 08:33:38 AM by GTX_Admin »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Eurofighter Typhoon
« Reply #12 on: June 09, 2014, 09:23:54 PM »
I like this one:




I was thinking about an RN one, but wouldn't it have CATOBAR nose gear with twin wheels ?

Offline Rickshaw

  • "Of course, I could be talking out of my hat"
Re: Eurofighter Typhoon
« Reply #13 on: June 10, 2014, 09:25:04 AM »
I believe the proposal was to use bridles.

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: Eurofighter Typhoon
« Reply #14 on: September 30, 2015, 04:18:16 AM »
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline ysi_maniac

  • I will die understanding not this world
Re: Eurofighter Typhoon
« Reply #15 on: December 10, 2017, 01:19:48 PM »
Eurofighter Fulcrum. What config do you prefer?


Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Eurofighter Typhoon
« Reply #16 on: December 10, 2017, 01:46:58 PM »
Like the three-surface one, myself.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Eurofighter Typhoon
« Reply #17 on: December 10, 2017, 06:50:12 PM »
Carl loves canards.  :smiley:
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: Eurofighter Typhoon
« Reply #18 on: December 15, 2017, 05:04:25 AM »
Ordinarily I'm a canard man too, but that second one is seriously intriguing...
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Rickshaw

  • "Of course, I could be talking out of my hat"

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #20 on: June 26, 2019, 05:39:10 AM »
Back in the early '90s Germany was investigating a cheaper version.  Here are some of the options looked at:



It would be interesting to do a single engined variant.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Eurofighter Typhoon
« Reply #21 on: November 14, 2019, 06:16:05 AM »


Airbus Announces New Eurofighter Typhoon ECR/SEAD variant: https://wp.me/p2TYIs-hKl
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: Eurofighter Typhoon
« Reply #22 on: November 15, 2019, 07:52:11 AM »
Back in the early '90s Germany was investigating a cheaper version.  Here are some of the options looked at...

I missed this first time around. Very cool. Thanks Greg  :smiley:
Froglord: "... amphibious doom descends ... approach the alter and swear your allegiance to the swamp."

Offline arkon

  • Paper Building Maestro
Re: Eurofighter Typhoon
« Reply #23 on: October 03, 2020, 07:38:40 AM »
What is the big stick going though it all?
the paper gods demand sacrifice

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Eurofighter Typhoon
« Reply #24 on: October 04, 2020, 01:22:40 AM »
Its not a watermark is it?
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.