Author Topic: 1/72 Lockheed L-188-75 "Junior Electra"  (Read 5977 times)

Offline kerick

  • Responsible for all surrendered booty....Arrrr!!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #25 on: April 20, 2019, 09:03:13 AM »
Clearly a "what should have been"!!

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #26 on: April 20, 2019, 05:07:50 PM »
Update:

Windows are cut, once the wing assembly is done, the fuselage halves and the wings will be sprayed in a coat of primer.

on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #27 on: April 20, 2019, 05:28:22 PM »
WOW -- Super duper work cutting out windows.  :smiley:

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #28 on: April 21, 2019, 03:07:52 AM »
One minor point (though maybe not so minor for the passengers), don't forget to allow room for the toilet/galley area.  ;)  You can see where it is on a normal Orion (No. 41 and further aft), though that could obviously be moved a bit here.

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #29 on: April 21, 2019, 12:13:33 PM »
Just a thought; if memory serves me correctly, the EP-3E has a somewhat shortened tailcone compared to a standard P-3 and you might want to use that here.

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #30 on: April 22, 2019, 03:00:57 AM »
Just a thought; if memory serves me correctly, the EP-3E has a somewhat shortened tailcone compared to a standard P-3 and you might want to use that here.


Not that much - and it looks to have just chopped off the MAD boom:



Actually it is a pity you can't do a nicely faired in arrangement like on the Electras:

« Last Edit: April 22, 2019, 03:06:02 AM by GTX_Admin »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #31 on: April 22, 2019, 03:03:46 AM »
BTW, re my earlier comment re the toilet and galley, I would ignore my earlier suggestion of looking at what the P-3 has.  Instead, here is the layout of an Electra used by Branniff that shows these on the starboard side just after the entry:



I would probably keep something similar.
« Last Edit: April 22, 2019, 03:06:27 AM by GTX_Admin »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • I'd rather be dirtbike riding
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #32 on: April 22, 2019, 06:18:16 AM »
Like this Greg (scroll to the bottom)

http://www.contrailsmodels.com/Conversion_s.html

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #34 on: April 28, 2019, 10:45:15 PM »
Update:

more airbrush work done today, started off with the blue for the tail and the trims.
everything went good, the blue is on very nicely, that was until i started on the aluminium for the wings...

i had to learn the hard way that spraying Humbrol and Revell metallic enamel paints is a real pain in the ***.
i didnt matter how much thinner i used, it was still to thick and almost gummed up the works.
when the time comes to spray the bottom of the fuselage, i think im going to go back to handpainting for that part.

anyway it was a nightmare to spray on and an even bigger one to clean up, as the nozzle of the brush started to leak.
in the end, i managed to get it done somewhat right.
the white will be sprayed on as soon as the fuselage assembly is done.

some pictures.



on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #35 on: April 28, 2019, 11:00:24 PM »
That paint looks great and there's something about that shade of blue that I find most appealing.
 8)
Brian da Basher

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #36 on: May 12, 2019, 10:11:34 PM »
Update:

started on the cockpit assembly, before i can start on finishing the fuselage paintjob.



on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #37 on: May 19, 2019, 10:17:08 PM »
UPDATE:

cockpit has been assembled and decaled, but since it wont be that visible from the outside, i didnt bother with the second layer of paint or the varnish on the decals. the cockpit was then mated into the fuselage halves. in the next session, will be starting on external details before preparing this thing to airbrush. work on the latter might be delayed due to other smaller planned projects getting the same while paint sprayed on. this is to save time and work on getting these sprayed seperatly.

decals have been printed yesterday, allong with those for other future projects.

pics:





on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #38 on: May 23, 2019, 03:47:44 AM »
Update:

Hit a major SNAFU just now :icon_bofh:
I decided to put the noseweight in the fuselage, no problem until a few minutes later...
For some reason, the 5 second glue i used ti fix the weights started to vapor!
Result, my cockpit windows started to get clouded, while there was no glue anywhere near there?

Now i either have to find a way to fix it, or paint the windows over.  :'(
So pissed off right now!
on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #39 on: May 23, 2019, 04:08:56 AM »
Bugger!
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #40 on: May 23, 2019, 04:32:36 AM »
Can you pop out the cockpit windows and polish/clean them?

Offline Robomog

  • Would you buy a used kit from this man?
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #41 on: May 23, 2019, 05:51:07 AM »
I feel your pain, if you can get the transparency out you may be able to revive it with a toothpaste rub then wash off and dip it in klear.

Mog
>^-.-^<
Mostly Harmless...............

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #42 on: May 30, 2019, 11:11:59 PM »
Update:

this project is turning into a disaster at a rapid pace :(

first thing that went wrong last week was that the cockpit windows started to cloud up due to paintfumes from fitting in the noseweights. the more i tried to fix the issue the worst it got, so i had no choice but to paint it up.
to make matters worst, less then a day later, the cabin windows were starting to cloud up too! after trying to fix it with clear, with no avail, i thought "f*ck it".



now, i wasnt ready to give up just yet, thought i could make it at least presentable when the coat of white paint was sprayed on, but event THAT didnt go without problems. after removing the 1.25mm tape, i found out that the paint managed to creep through! i didnt have the courage to remove the rest of the masking tape, i will try to fix this by going over it with a fine piantbrush, but if anymore problems like these show up, im throwing the whole build in the trash and give up.
the rest of the build will be hand painted.

masking done:



windows masked with maskol.



the issue from the 1.25mm tape after spraying, makes me go crazy!





on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #43 on: May 31, 2019, 12:09:00 AM »
Man, that sucks! :icon_crap:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #44 on: May 31, 2019, 07:10:21 AM »
I can feel the pain from here and it reminds me of problematic paintwork I've performed in the past.

Best of luck on the recovery, Nils!

Brian da Basher


Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • I'd rather be dirtbike riding
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #45 on: May 31, 2019, 07:53:04 AM »
What was the brand of super glue you used Nils ?

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #46 on: June 01, 2019, 04:43:28 PM »
Update,

as i said before, im not ready to give up on this thing just yet.
i pulled of the larger masks and it came out somewhat alright, i tried to fix the runners on the thinner lines with blue paint and a very thin brush, it fixed it a little, its not perfect but i think ican live with it. the end of the tail is unsavable, so im gonna paint that part over with the same aluminium paint im using for the underside. the cockpit windows are also gonna need a little rework but its do-able.

i might be able to save this build from the bin.


Kitnut, i used some cheap dollarstore 3-second glue that same in a pack of 8, i used it before a few times and never had any real problems.
on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • I'd rather be dirtbike riding
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #47 on: June 01, 2019, 09:59:58 PM »

Kitnut, i used some cheap dollarstore 3-second glue that same in a pack of 8, i used it before a few times and never had any real problems.

I was following a thread on the What-If forum about who uses what for super glue, mainly the topic was about how the glue all dries up in the bottle. A good portion of the replies were, 'having found this out the hard way (pun intended), they always buy the glue from the dollar* store ( * insert whatever currency you use) because it's cheap so you're not wasting money.

I went and bought a couple of tubes from the local dollar store, but what you have just said will have me being very careful where I use the cheap stuff. I'm wondering if it's related as I don't recall the "expensive" glue doing that when I've used it on canopies.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #48 on: June 01, 2019, 11:30:46 PM »
I've found that glues, like medications, are better when bought from brands that invest in R&D. They may be more expensive but they work better & have less negative side-effects.
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline nils

  • 1/144 addict
  • Za Rodina!!!
Re: 1/72 Lockheed L-188-75 "Junior Electra"
« Reply #49 on: June 06, 2019, 12:34:16 AM »
Update:

despite the paint damage and many problems during the last update, i have managed to save it from the garbage can.
3 days ago, i fitted on the tailplanes and the nosecone. she is really getting that retro SABENA look.



over the last 2 days i have mostly been working on the last sub-assembly's, mostly paintwork and assembly of the landing gear.
the propellors are currently ungoing paintwork, with 3/4 blades now in grey. spinners have been painted in a light silver.
last night, the landing gear struts have been fitted, with no problems.







although i did hit one snagg last night, with the white circles on the tails, ive used white decalfilm to avoid the messy paintwork and to save time. however, as there was no gloss coating sprayed on the paper, it started to stretch and curling up (very thing film indeed), i had to remove them and cut them out again, luckily one of my last aliexpress purchases was a circle-cutter, i had to cut out and re-apply new circles 5 times before i got the application right, the large size made it quite difficult to apply.

all in all, in the end, the results were satisfactory.

on the bench:
-various models

on the drawing board:
-various 1/72 TinTin aircraft
-1/72 Eurocopter Tiger (Belgian Army)
-various other 1/72 and 1/144 aircraft