Author Topic: Throwing one back - building 'Gerti' - Done!  (Read 1387 times)

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti'
« Reply #15 on: July 10, 2018, 09:34:54 PM »
 Hi all

Having a bit if a mare with the painting as it is unusually hot here in The UK, I'm using Tamiya acrylics but the paint is drying almost as soon as its leaving the brush  :icon_twisted:

Someone has suggested adding a retarder so I will give that a try.

The progress so far if you zoom in you will see the patchy finish ................

by Robomog, on Flickr

Thanks for looking

Mog
>^-.-^<

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: Throwing one back - building 'Gerti'
« Reply #16 on: July 12, 2018, 04:05:47 AM »
That's looking like it's on the way to a superb finish.

My problem painting in hot weather is the fan. I can't paint when it's on and anything over 85F makes a fan necessary.

I'm very much enjoying watching your progress, Mog!

Brian da Basher

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
    • SketchUp 3D Warehouse - My Digital Models
Re: Throwing one back - building 'Gerti'
« Reply #17 on: July 12, 2018, 04:11:30 AM »
Maybe the patchy paint work can be explained away as normal wear on the paint while carrying and launching your V-1? 

What is the retarder that you will use with your acrylics?  I have read some where that some folks use Windex or Alcohol as a means to thin the paints.  Would this also be useful as a retarder?
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti'
« Reply #18 on: July 12, 2018, 06:01:15 AM »
Hi chaps
 
Brian - i think the photograph is more flattering than it appears to my mk1 eyeballs but thank you for your words of encouragement, Sounds like you are between a rock and a hard place when painting!

Jeffry - I too have heard that using Windex or isopropyl alcohol will act as a retarder but cannot get hold of either, as i am having particular trouble using Tamiya paints I have ordered a bottle Tamiya retarder. However in the meantime I have purchased some artists acrylic retarder from our local Hobbycraft. Initial tests look promising but I need to do a test on a model sized batch to be sure.

Since the photograph was taken I managed to get another slightly better coat of paint on the Wellington so maybe a little weathering as you say and a coat of matt varnish will do the business. I will let you know how I get on with the retarder later.

Thanks all

Mog
>^-.-^<
« Last Edit: July 12, 2018, 06:09:05 AM by Robomog »

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti'
« Reply #19 on: July 25, 2018, 06:36:04 PM »
Made lots more progress on Gerti just haven't had time to update thread so a massive update here

Given my problems with push painting I whimped out and did the black underside using masking tape and a rattle can. The result was very good, I don't think I would have got a finish like this by brush painting.

The top shortly after spraying ............

by Robomog, on Flickr

And the bottom .............

20180711_224014 by Robomog, on Flickr

And with the masking removed .............

20180720_193849 by Robomog, on Flickr


As an aside I thought a twin tail Wellington was pretty good whiffery, however I have just found this picture on the innernet of a twin tailed Wellington fitted with a 40mm Vickers S gun so not quite as unique as I thought !  It would make a cracking conversion for a model though.

wellington_mk2_l4250_40mm_1 by Robomog, on Flickr

Sigh........


Moving on ......

I normally build my models with the wheels down but as I only have one wheel and one and a bit undercarriage legs in various pieces I have decided to complete this one wheels up. I did try and scratch build a new undercarriage using aftermarket wheels but they were flimsy and wouldn't have lasted long.

There was still some fiddlies to do to complete the undercarriage, the first was to recreate a missing wheel door. Then, as the Wellington had part of its wheels exposed,  I cut the one wheel I had into two and mounted each part on some scrap card and a piece of sprue so they they would stick out at the correct distance.

The undercarriage components.........
by Robomog, on Flickr

Can you guess which is the replacement door ?

The assembled undercarriage ........
20180721_141711 by Robomog, on Flickr

And the completed installation.......
20180721_151619 by Robomog, on Flickr

Some filler will be needed to close some of the gaps.

When the undercarriage construction had set I installed the catapult.

by Robomog, on Flickr

That's the lot for  now the next big bit is to create the protective skinning on the spine of the Wellington behind the V1  .....  watch this space

Thanks for looking

Mog
>^-.-^<



« Last Edit: July 27, 2018, 04:40:06 AM by Robomog »

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Throwing one back - building 'Gerti'
« Reply #20 on: July 25, 2018, 08:35:16 PM »
Can you guess which is the replacement door ?

Lower right , but it's very good! ;)


Gerti is coming along beautifully, by the way! :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti'
« Reply #21 on: July 25, 2018, 08:54:30 PM »
Got it in one !

Thanks

Mog
>^-.-^<

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: Throwing one back - building 'Gerti'
« Reply #22 on: July 26, 2018, 05:34:11 AM »
That's a mighty fine update, Mr Mog!

Will keep in mind the tip about rattle cans.

I like the twin tails and if I had a buck for every time reality skunked me like that I could buy you all a round.

Brian da Basher

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti'
« Reply #23 on: July 31, 2018, 03:09:26 AM »
Thanks Brian

Here's another small update, this is the last of the structural additions before painting. In the alt history to avoid singeing the fabric when  firing the V1 the team  plated  the spine with recovered aluminium sheeting acquired from their aircraft graveyard. This  is a modelling equivelent of shooting yourself in the foot as I now have to reproduce this on Gerti.

I experimented with tin foil  which gave a good representation, but was difficult to paint and very fragile. In the end I settled on using paper thin polystyrene plastic that I had retrieved from some packaging of a computer ball mouse (I think). This was cut into squares and attached with gel superglue and curved around the fuselage with masking tape, I have deliberately used a random pattern as this was carried out in a last minute rush and no time was given for aesthetics. It will be painted in a similar fashion.

The plating, held down by masking tape...........

by Robomog, on Flickr

All done, in a rather fetching green .................

by Robomog, on Flickr

I am actually further through the build than I am showing here,  i just want the paint job to be a suprise.

I'm hoping to complete Gerti tonight and will post the finished project before the deadline, although I believe the contestants have a Forty something hours buffer due to a hiccup at the beginning. We shall see.

Thanks for looking

Mog
>^-.-^<
« Last Edit: July 31, 2018, 05:50:28 AM by Robomog »

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: Throwing one back - building 'Gerti'
« Reply #24 on: July 31, 2018, 04:23:27 AM »
I think those spine plates will look great!

Looking forward to the big reveal,
Brian da Basher

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti'
« Reply #25 on: August 01, 2018, 05:26:51 AM »
Hi All,  Final Push

With the plating set proceeded to paint the individual panels, then weather them to simulate chipped, damaged, riveted recovered aluminium plate.

The plating before weathering ..........
by Robomog, on Flickr

For those interested the colours used were :-

Dark Green
Dark Earth
Black
Aluminium
Sky
Light Grey
Ocean Grey
PRU Blue

The Plating after treatment ..........
by Robomog, on Flickr
 
Gerti is a well used Wellington so I have done some basic wear and tear on the airframe and also distressed the decals a bit so they don't look pristine.

Here are a few photographs showing Gerti Close to completion.

The Decals are on......
by Robomog, on Flickr

And the other side.......
by Robomog, on Flickr

Gerti gets her name.......
by Robomog, on Flickr

Each letter of Gerti's name was cut and positioned individually, it took ages!  also did my eyes in as even with some magnifiers I was working at the very edge of my vision.

So now I present to you for inspection Gerti, the V1 throwing Wellington

Some general views.........
by Robomog, on Flickr

by Robomog, on Flickr

by Robomog, on Flickr

by Robomog, on Flickr

by Robomog, on Flickr

by Robomog, on Flickr

Front and back .......

by Robomog, on Flickr

by Robomog, on Flickr

And some close ups......

by Robomog, on Flickr

by Robomog, on Flickr

Finished off with a couple of top shots.............

by Robomog, on Flickr

by Robomog, on Flickr

I really did have some fun with this one and have started eyeing up other battered kits for a bit of whiffing treatment, unfortunately life and work will now get in the way as I will be working away from home, dragged screaming from my workbench, and will probably miss the next group build.

Heavy Sigh........

Anyways thanks for looking, All comments and criticism gratefully accepted, as always.

Mog
>^-.-^<







Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: Throwing one back - building 'Gerti' - Done!
« Reply #26 on: August 01, 2018, 06:08:37 AM »
Wow what a phenomenal piece of work, Mog!

Those plates look fantastic! You've got some mad metal weathering skills!

Brian da Basher

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Throwing one back - building 'Gerti' - Done!
« Reply #27 on: August 01, 2018, 07:45:40 AM »
Beautiful!! She quite looks the part.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Throwing one back - building 'Gerti' - Done!
« Reply #28 on: August 01, 2018, 10:59:26 AM »
Awesome job, Mog! Even better than how I'd envisioned her. :smiley: :smiley: 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • Would you buy a used kit from this man?
Re: Throwing one back - building 'Gerti' - Done!
« Reply #29 on: August 01, 2018, 03:59:21 PM »
Thanks guys, much appreciated

Mog
>^-.-^<