Author Topic: Kilpikonna Skyfire  (Read 154 times)

Offline Twiddle

  • No, it's pronounced Frankensteen
Kilpikonna Skyfire
« on: March 18, 2019, 01:58:13 AM »
Need a distraction from my Norsu Heavy APC build

Here's the distraction :

Bash of the following two kits:
1) 1/48 Academy Spitfire FR.XIVe
2) 1/48 Italeri AD-4 Skyraider

Here is the proposed layout as seen from above



Me thinks the FR.XIVe  fuselage must be
1) Widened
2) Lengthened

How I am going to do 1) and 2) is beyond me  :o

PS - Thanks for making BtS so great !
PPS - Apologies for the glorious mess on my hobby desk  ;D
Kit instructions are not acceptable - let the imagination howl forth !

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Kilpikonna Skyfire
« Reply #1 on: March 18, 2019, 02:18:28 AM »
Curious to see where this goes.  The "Skyfire" name is a winner though. :smiley:
All hail the God of Frustration!!!

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Kilpikonna Skyfire
« Reply #2 on: March 18, 2019, 04:06:51 AM »
Curious to see where this goes.  The "Skyfire" name is a winner though. :smiley:
Agree on all points.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Kilpikonna Skyfire
« Reply #3 on: March 18, 2019, 12:11:45 PM »
Predict lot of PSR is ahead.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Kilpikonna Skyfire
« Reply #4 on: March 18, 2019, 12:21:33 PM »
Lengthening the fuselage is going to be a challenge.  If 'twere me, I'd cut just behind the cockpit so that the aft section had the back fairing on the wing and move that back enough to line up with the Skyraider trailing edge and build up the fuselage from there with a lot of cut sprue stringers covered with either small sections of plastic card or formed larger pieces and then putty over that.

Just my $0.02.

Offline kerick

  • Responsible for all surrendered booty....Arrrr!!!!
Re: Kilpikonna Skyfire
« Reply #5 on: March 18, 2019, 12:39:16 PM »
Lengthening the fuselage is doable as elmayerle stated. Widening is another matter. The engine and cockpit area could be done with plastic strips added between the fuselage halves but then you would have to taper the rest of the way back to the tail. Either taper some plastic strips or use epoxy putty.
This will be interesting to watch.