Author Topic: Claymore's AH AFVs: Take 2  (Read 549756 times)

Offline raafif

  • Is formally accused of doing nasty things to DC-3s...and officially our first whiffing zombie
  • Whiffing Insane
Re: Claymore's AH AFVs: Take 2
« Reply #1000 on: June 10, 2026, 06:59:38 AM »
Fantastic :smiley: (as usual).

Offline Kerick

  • Reportedly finished with a stripper...
Re: Claymore's AH AFVs: Take 2
« Reply #1001 on: June 10, 2026, 08:03:43 AM »
That’s really well done! Such a total transformation.
I bet with all this drone warfare going on interest in small systems like this will skyrocket.

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1002 on: June 10, 2026, 02:35:46 PM »
Thanks guys!  :smiley:
Pass the razor saw, there is work to be done!

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Claymore's AH AFVs: Take 2
« Reply #1003 on: June 10, 2026, 07:15:56 PM »
It's all those moving bits that really blitz my brain, because I struggle to get turrets to turn, let alone even think about trying to get all those other little bits to move!  :-\  :-\  :icon_alabanza:
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1004 on: June 10, 2026, 08:06:02 PM »
 ;D ;D ;D. Oh, I had my brain removed several years ago and replaced with that of an obsessively compulsive gerbil - or so Mrs Claymore says!  ;D ;D ;D
Pass the razor saw, there is work to be done!

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: Claymore's AH AFVs: Take 2
« Reply #1005 on: June 10, 2026, 08:22:54 PM »
Really a quite slick design. I would imagine this Ferret would be reasonably suitable for this type of shoot and scoot role.

Great build getting this together* Looking forward to the next steps

Might hit you up for some STL if you are willing. I like how you have done the design and in Resin I would imagine it would still work most satisfactorily


*Ok.. still just a wee bit let down it was 3D and not a full old school scratchbuild, either way.. I like it a lot. ;)

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1006 on: June 10, 2026, 09:01:39 PM »
Really a quite slick design. I would imagine this Ferret would be reasonably suitable for this type of shoot and scoot role.

Great build getting this together* Looking forward to the next steps

Might hit you up for some STL if you are willing. I like how you have done the design and in Resin I would imagine it would still work most satisfactorily


*Ok.. still just a wee bit let down it was 3D and not a full old school scratchbuild, either way.. I like it a lot. ;)

Thanks mate and yes it was although only 50 Mk5s were made for real before they were replaced by the FV102 Striker.

Although I appreciate that 3D printing isn’t everyone’s bag and may offend the pure of heart, I look at it this way - the design work needed to produce the stl files is little different to the time and skill taken to measure and cut the plastic card in more traditional build methods.  However, the advantage of 3D printing is that multiple, identical pieces can be made to exacting tolerances which both saves time and is aesthetically pleasing.  Using each technique when it is most appropriate is, I believe, the way ahead.

Happy to share any stl files I have but please bear in mind that my CAD skills are limited.  Attached is an image of my designs in the creation stages…


« Last Edit: June 11, 2026, 01:57:33 AM by Claymore »
Pass the razor saw, there is work to be done!

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1007 on: June 11, 2026, 03:08:26 AM »
Ferret Mk5 Swingfire Update:

Undercoat applied and looking altogether more complete in its bizarre weirdness - but the Mk5 was indeed a real vehicle...









Pass the razor saw, there is work to be done!

Online Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: Claymore's AH AFVs: Take 2
« Reply #1008 on: June 11, 2026, 05:08:37 AM »
Although I appreciate that 3D printing isn’t everyone’s bag and may offend the pure of heart, I look at it this way - the design work needed to produce the stl files is little different to the time and skill taken to measure and cut the plastic card in more traditional build methods.  However, the advantage of 3D printing is that multiple, identical pieces can be made to exacting tolerances which both saves time and is aesthetically pleasing.  Using each technique when it is most appropriate is, I believe, the way ahead.

That's how I feel. I've had to stop myself from cutting plastic when I realize that CADing the part up will produce a better (and quicker) result.

Your model, as usual, looks amazing under the primer!

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1009 on: June 11, 2026, 05:35:21 AM »
Thanks Frank, much appreciated.  :smiley:
Pass the razor saw, there is work to be done!

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: Claymore's AH AFVs: Take 2
« Reply #1010 on: June 11, 2026, 06:33:00 AM »
Although I appreciate that 3D printing isn’t everyone’s bag and may offend the pure of heart, I look at it this way - the design work needed to produce the stl files is little different to the time and skill taken to measure and cut the plastic card in more traditional build methods.  However, the advantage of 3D printing is that multiple, identical pieces can be made to exacting tolerances which both saves time and is aesthetically pleasing.  Using each technique when it is most appropriate is, I believe, the way ahead.

That's how I feel. I've had to stop myself from cutting plastic when I realize that CADing the part up will produce a better (and quicker) result.

Your model, as usual, looks amazing under the primer!
Fully agree about the ability to create more accurate parts in multiples, best thing ever.
Coming from the 'Old school' and seeing Claymore's, Frank's and many others previous wonderful full on scratch builds have been further inspiration.
I dunno, probably just the nostalgia thing of reading too many Airfix Magazines, with plans by Bruce Quarrie and the like to build a 1/76 Cruiser Mk 9 using Margarine plastic, parts of a Sherman and buttons. The change to CAD is inevitable. I have embraced it myself, albeit at a much simpler level than you or Frank.

[/quote]
please bear in mind that my CAD skills are limited.
Understatement of the year  so far :o   This certainly looks to me to be commercial conversion territory.

Just the best work all around again :icon_alabanza:


Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1011 on: June 11, 2026, 07:29:30 AM »
This certainly looks to me to be commercial conversion territory.

Just the best work all around again :icon_alabanza:

You are most kind.  :-[

Perhaps a little more styrene and a little less PLA filament in the next build…  ;)
Pass the razor saw, there is work to be done!

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Claymore's AH AFVs: Take 2
« Reply #1012 on: June 11, 2026, 05:34:45 PM »
Well, that's tied it together nicely!  :smiley:


I'm staying out of the 3D printing conversation because it's way above my head.  :-\

I could probably get away with trying to do the CAD part, but there's not a snowflake's chance in Hell that Mrs Wombat wouldn't beat my skull in with it if I bought a 3D printer (of any level).  :o
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1013 on: June 11, 2026, 11:19:41 PM »
Well, that's tied it together nicely!  :smiley:


I'm staying out of the 3D printing conversation because it's way above my head.  :-\

I could probably get away with trying to do the CAD part, but there's not a snowflake's chance in Hell that Mrs Wombat wouldn't beat my skull in with it if I bought a 3D printer (of any level).  :o

Thanks mate…  ;D
Pass the razor saw, there is work to be done!

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: Claymore's AH AFVs: Take 2
« Reply #1014 on: June 16, 2026, 04:50:30 AM »
Your Ferret Mk5 Swingfire in primer is gorgeous  :-*

... Enter the groovy beach buggy - yeh baby!! ...

Anyone else getting serious UGV-for-the-BAOR vibes from that wee beastie?!
"Rumble thee forth to the land of the unbelieving scum on the other side
'cuz they don't go for what's in the Book and that makes 'em BAD!"

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1015 on: June 16, 2026, 03:42:56 PM »
Your Ferret Mk5 Swingfire in primer is gorgeous  :-*

... Enter the groovy beach buggy - yeh baby!! ...

Anyone else getting serious UGV-for-the-BAOR vibes from that wee beastie?!

 ;D Thanks mate!  :smiley:
Pass the razor saw, there is work to be done!

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1016 on: Yesterday at 08:07:05 PM »
FV712 Ferret Mk 5 Swingfire Update:

Done. done!

FV712 Ferret Mk 5 Swingfire

Fact [1]:
The Daimler Ferret was, basically, a modernised version of their WW2 Dingo. It shared many similarities such as the H-form drive train helping it keep a low silhouette while keeping sufficient ground clearance. Between a better power-to-weight ratio and longer wheelbase, the Ferret was clearly superior to the Dingo in terms of speed and mobility on all terrains.

The Ferret Mk 1, like the Dingo, lacked a turret and was primarily used as a liaison vehicle with a crew of 3. The Mk 2 introduced a six-faceted turret, raising the position of the commander and protecting him while providing a 0.30 calibre Browning machine gun. The third crew man was eliminated but the vehicle’s performance gained in efficiency allowing it to effectively fill the scouting role. Then came the Ferret Mk 3 which, notably, had much larger (11x20 inch) wheels for better mobility on soft ground. However, this turretless design never went into production. The Mk 4 had the same ‘big wheels’ as the Mk3 and bigger brakes (a concern of the earlier Mk1-2), a flotation screen for amphibious operations and the same 6-sided turret as the Mk2.

The Ferret Mk 5 was a late production vehicle which incorporated the best features of the Mk3 and Mk4 but with a new turret ring and a brand new, much larger but light-weight aluminium turret – the first British vehicle to utilise this material in AFV design. The turret, housed and was capable of firing four Swingfire Anti-Tank Guided Missiles (ATGM) whilst keeping a 7.62mm GPMG for close combat. The missiles were placed in on a traversing cradle with hydraulic drive for elevation. A notable capability of the design was that the missiles could be remotely launched. The crew could dismount the vehicle, adopting a dominant ambush position for better view, and launch the missiles via the portable aiming and control unit whilst the launcher (and any associated back-blast) remained hidden from view. The Ferret Mk 5 entered service in 1969 as the FV712 and was intended to give light reconnaissance units extra capabilities in case of encounters with enemy tanks.

FV712 Ferret Mk 5 Swingfire:
In Service: 1975-1993
Mass: 5,894 Kg
Length: 4.140 m
Width: 2.159 m
Height: 2.134 m
Crew: 2
Main
armament: 4 x Swingfire ATGM (plus 2 x spare)
Secondary
armament: 7.62mm L37A2 machine gun
Engine: Rolls-Royce B60 Mk 6A, 6-cylinder, 4.26ltr, petrol – 130hp
Speed: 58mph (93km/h)
Range: 250mls (400km)

Firing from cover was made possible by the unique nature of the Swingfire missile’s vectored thrust which allowed the missile to make a near 90-degree turn straight after launch and its wire command link. Produced from 1966-1993, Swingfire remained in service longer than most ATGMs – proving the efficiency of the concept. Swingfire entered operational service in 1969 and was constantly upgraded to remain relevant over the years.

Swingfire ATGM:
In Service: 1969-1993
Mass: 27 Kg
Length: 1.07 m
Diameter: 0.170 m
Wing Span: 0.39 m
Warhead: 7 Kg HEAT
Speed: 185 m/s
Range: 150 – 4,000 m
Guidance: Wire-guided (MCLOS) and later SACLOS

Fiction [2]:
With the failure of the FV720 Fox program in the early 1970s and the decision to adopts the FV608 Scarab in its place for the Territorial Army’s (TA) recce formations, the Regular Army’s FV712 Ferret Mk 5 Swingfires were also repurposed to the TA as they, in turn, were being replaced by the FV102 Striker CVR(T). Within the TA, four yeomanry regiments eventually converted to the Scarab/Ferret Mk 5 combo in the armoured reconnaissance role:

Queen’s Own Yeomanry (5 x Squadrons) - 15th TA Bde, 2 UK Infantry Division in support of BAOR.
The Royal Yeomanry (5 x Squadrons) - 49th TA Bde, 2 UK Infantry Division in support of BAOR.
The Duke of Lancaster’s Own Yeomanry (4 x Squadrons) - 2 Inf Bde, Home Defence
The Scottish Yeomanry (4 x Squadrons) - 1 Bn, 51 (Highland) Inf Bde in support of 4 Arm Div, BAOR, and Home Defence.

The yeomanry regiments comprised of 4-5 squadrons each of 12 x Scarab, 4 x Ferret Mk 5 (Swingfire), and 4 x Saracen APC split between 4 x recce troops, an anti-tank troop, and a squadron HQ of 1 x Saracen CPV, 1 x Ferret Mk 4 and 1 x Saracen ambulance. Tactically, the 4 vehicles of the Anti-Tank Troop did not operate independently but were task organised to provide overwatch support for the 4 recce troops.

It is possible that, like the FV608 Scarab it served alongside, the FV712 Ferret Mk 5 Swingfire may have served longer were it not for the end of the Cold War and the subsequent peace dividends that slashed the size of the British Army.

The model depicts the third vehicle of 5 (Anti-Tank) Troop, B Squadron, The Scottish Yeomanry in support of 1st Bn, 51 (Highland) Inf Bde during Ex LIONHEART 84. With its sporting performance and callsign of 53, it didn’t take long for this particular vehicle to gain the name ‘Herbie’. Construction is from a combination of an Airfix Ferret Mk2, quite a lot of home-grown 3D prints, some repurposed wheels from Cult3d.com, some plastic card, some parts from the spares box, some carbon fibre rod, and some home-grown decals.

References:
1. Extracted from tank-afv.com – Daimler Ferret Swingfire page.
2. Extracted from my Saladin R (FV608 Scarab) backstory.














Pass the razor saw, there is work to be done!

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: Claymore's AH AFVs: Take 2
« Reply #1017 on: Yesterday at 08:55:14 PM »
As expected, bloody marvellous  :smiley:

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Claymore's AH AFVs: Take 2
« Reply #1018 on: Yesterday at 09:06:57 PM »
Oh, how surprising! A Scottish Regiment!  ;)

As BT (buzzbomb) said "Bloody marvellous!"  :smiley:  8)
"This is the Captain. We have a little problem with our entry sequence, so we may experience some slight turbulence and, ah, explode."

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1019 on: Yesterday at 09:20:00 PM »
As expected, bloody marvellous  :smiley:

Oh, how surprising! A Scottish Regiment!  ;)

As BT (buzzbomb) said "Bloody marvellous!"  :smiley:  8)

Thanks gents, much appreciate.  A Scottish Regiment?  Why of course and at every opportunity!   ;)
Pass the razor saw, there is work to be done!

Offline Kerick

  • Reportedly finished with a stripper...
Re: Claymore's AH AFVs: Take 2
« Reply #1020 on: Yesterday at 09:57:14 PM »
Great job all around!

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1021 on: Today at 12:20:06 AM »
Great job all around!

Thanks mate!  :smiley:
Pass the razor saw, there is work to be done!

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Claymore's AH AFVs: Take 2
« Reply #1022 on: Today at 04:32:18 AM »
Once again, excellent work.   
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: Claymore's AH AFVs: Take 2
« Reply #1023 on: Today at 06:28:41 AM »
Once again, excellent work.   

Thanks Jeff, you are most kind!  :smiley:
Pass the razor saw, there is work to be done!