Author Topic: Ki-98  (Read 9874 times)

Offline Dr. YoKai

  • Was in High School when mastadons roamed the plains...
  • A notorious curmudgeon who is partial to...hemp!
Re: Ki-98
« Reply #30 on: May 28, 2013, 07:45:50 AM »
 It really looks right in the French markings. Beautiful job, Frank.

Offline ysi_maniac

  • Moderator
  • I will die understanding not this world
Re: Ki-98
« Reply #31 on: May 28, 2013, 11:29:05 AM »
^^^^^
Agreed!!

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Ki-98
« Reply #32 on: May 28, 2013, 03:02:32 PM »
^^^^^
Agreed!!

Agreed x 2
Is right in all ways - build, finish, markings  8)

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Ki-98
« Reply #33 on: May 28, 2013, 09:53:26 PM »
I fourth the Evil Doctor's sentiments!

Well done, Frank!

:)

Guy
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Frank3k

  • Excession
  • Formerly Frank2056. New upgrade!
    • My webpage
Re: Ki-98
« Reply #34 on: May 28, 2013, 11:46:32 PM »
Thanks guys - this (like all Meng kits I've seen so far) is a trouble free and very enjoyable model. The engineering and fit are top notch and the few problems I had with it were all self-inflicted. Highly recommended!

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Ki-98
« Reply #35 on: May 29, 2013, 02:11:08 AM »
Damn fine work! :)
All hail the God of Frustration!!!

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Global Moderator
  • Hulk smash, Brian bash
Re: Ki-98
« Reply #36 on: May 31, 2013, 08:21:57 AM »
Yowsa that finished up a treat, Frank! That perfectly-rendered French scheme is truly inspired and you've really pulled it off nicely. You have serious painting skills.

Outstanding!!!

Brian da Basher

Offline apophenia

  • Suffered two full days of rapid-fire hallucinations and yet had not a single usuable whif concept in the lot !?!
  • Patterns? What patterns?
Re: Ki-98
« Reply #37 on: June 01, 2013, 04:05:10 AM »
Agreed. A brilliant build and the French markings truly inspired  :)
Under investigation by the Committee of State Sanctioned Modelling, Alternative History and Tractor Carburettor Production for decadent counterrevolutionary behaviour.

Offline father ennis

  • I got paint older than most of you guys ...
  • Our Scifi, armour-building Rennissance Priest...
Re: Ki-98
« Reply #38 on: June 01, 2013, 01:15:12 PM »
WoW ... !!!!!!   Great build ... !!!!!!   I don't know how but somehow ......  I missed the pictures of the finished model until now !!!!!!   But I have been reading the comments.   

         I saw you had some decal trouble. Here is how I deal with it.  After the silvered decals is dry ,take your X-acto with a new blade and tap the point over the whole thing. Following this.   With a heavy coating of Micro-sol and using a fine sponge press down on it. You need to.be careful doing these,keep a vertical position perpendicular to the surface. I use Micro-set when I apply my decals followed by the Micro-Sol if I've got detail to cover.  I've only used Solvaset a few times. The stuff disolved the brush in the bottle ... !!!!!!!!!!!!   FYI, for those who don't know,silvering is caused by air being trapped under the decals.  That is the reason you put the tiny holes in it and then use the Micro-set to snuggle it down. I use the sponge from an old figure package with both solutions. I've recently seen people using the wedge shaped sponges from the make up dept. I've got some in my make up kit but have never thought of using them,before. I do plan on using them in my next decaling scession ,though.  You may need to repeat the process on a bad spot ,but it "should" fix it.
         Your other trouble with canapoy masking can be fixed by painting it by hand. I use the tip of a toothpick for this. If I make a mistake, I use the clean end to correct it. As long as you use a material softer than the plastic you won't leave a mark. That's why I use a toothpick. Works best once the paint has "skinned over". 
           You've done a tremendous job on this build and it looks great ...    :-*     One question, did you use the engine shown in the pictures inside it ? 
I may be old but I'm not dead ... yet anyway ... !!!    And NO I did not know Richard III !!!!!!

Offline Frank3k

  • Excession
  • Formerly Frank2056. New upgrade!
    • My webpage
Re: Ki-98
« Reply #39 on: June 03, 2013, 05:56:46 AM »
Father Ennis - the silvering in the decals wasn't the usual type. The decals had a coat of Future under them and were OK... until the Solvaset hit them. I pushed them down and let them dry and after a few days, the silvering was gone or greatly reduced. I have a problem with canopy framing, regardless of the method used.

Here's the ki-98 with the drop tanks:



With the Nene engine on a workstand, and "Henri" the photographer:







The workstand is a heavily modified stand from the MAC 1/72 JB-2 Loon. The Nene engine is a neat little resin kit from Aries and the PE bits are very soft and easy to work with.



Thanks for all the comments!

Backstory:

In 1945, The  Mansyū (Manchurian Aeroplane Manufacturing Company Ltd.) was ready for the test-flight of their advanced fighter, the Ki-98. The imminent defeat of Japan and the threat of both the Soviet Army and reprisals from the various Chinese factions caused the Japanese and their Manchukuo allies to order the destruction of the prototype and its tooling and plans. This order never made it to the plant and the lead designer, who had received his education in France, decided to use the Ki-98 as a "resume", with the hopes of continuing his career under the auspices of one of the victors (but not the Soviets or Chinese).
He and several trusted junior engineers crated the prototype (minus the engine) , tooling and plans into a train packed with injured civilians - the crates were marked as humanitarian supplies.
The train was originally destined for Seoul, Korea but the cars with the Ki-98 and its engineers ended up rerouted through China and into Laos.

Immediately after the war, the plane was offered to the returning French forces, who quickly confiscated it and placed it in storage. The French were facing a mounting anti-colonial resistance in Vietnam and had no time for new aircraft construction.

The war of independence was short-lived; the US and the UK (who were by now quite fed up with De Gaulle) refused to support the French and actively blocked any French attempts to resupply its forces. The French were forced from Vietnam into their remaining colonies in Laos and Cambodia.

Still needing an ally against the Communists, the French, US and UK entered an agreement; in exchange for their losses in Vietnam, the French would receive tanks and fuel from the US and license to build the Rolls Royce Nene engine. This would allow them to defend their colonies.

The new agreement was soon put to the test, as the Communist Chinese forces, after their quick defeat of  Kuomintang in 1947, expanded and "liberated" parts of Laos from the French and were threatening both Thailand, Vietnam and the last major French colony, Cambodia. A war weary US and Great Britain were not willing to go to war against the Chinese, but they were willing to support the French defense of their colonies.

The old Spitfires and repurposed Japanese planes in the French colonial air force were just able to slow the Chinese advances. The French decided that it would be quicker to assemble new aircraft in Cambodia than have them shipped to the area from France. In 1947, they opened a factory in Phnom Penh and the nearly complete Ki-98 was test-flown with a piston engine. Performance was hampered by the old engine used in the Ki-98. The plans were handed over to Arsenal de l'Aéronautique, who - with little modifications to the airframe - were able to install a license built Nene engine into the now renamed Arsenal VG-98.

The original landing gear was designed for a large prop; there were plans to shorten the gear but initial flights of the prototype showed that the tall gear was an asset when taking off from front-line airstrips, since it all but eliminated FOD to the engine. 

Even though less than 20 planes were built, the VG-98's 37mm cannon and four 20mm canons were highly effective against the Soviet supplied T-34 tanks used by the Chinese, as well as trains and other troop transports. 




« Last Edit: June 03, 2013, 07:09:39 AM by Frank3k »

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: Ki-98
« Reply #40 on: June 08, 2013, 09:37:06 PM »
Belated congratulations! :-* :-*

Offline ysi_maniac

  • Moderator
  • I will die understanding not this world
Re: Ki-98
« Reply #41 on: June 15, 2013, 12:44:57 AM »
Highest quality! :) ;)

Offline billb

  • The man knows how to make an entrance...
Re: Ki-98
« Reply #42 on: June 15, 2013, 06:24:04 AM »
Really nice work.  That nene sets the while thing off perfectly!