Author Topic: Profile Requests  (Read 21614 times)

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Profile Requests
« on: February 02, 2013, 05:29:43 PM »
Hi folks,

If anyone has specific profile requests, please list them in this thread.  Please be considerate though.  There is no obligation upon any profile artist to do anything.  If they do fulfil a request, it is a favour.  Also try not to be too demanding - in other words, try to keep any requests to a workable minimum.  We don't want to overload people.

Kind regards,

Greg
All hail the God of Frustration!!!

Offline Matt Wiser

  • Newly Joined - Welcome me!
Re: Profile Requests
« Reply #1 on: February 07, 2013, 10:17:46 AM »
Might as well be the first: for Jan's The Last War alternate history: a PLAAF Mirage F-1. The backstory is that after the Soviet hard-liners took over from Gorbachev (and the walls never came down in Eastern Europe), the West decides, reluctantly, to put Tianamen in the past and resume assistance to the PRC in modernizing its military. France is the first with selling Mirages....

A second one in this area would be a PLAAF AH-1T (the U.S. gets in on it eventually).
Treat everyone you meet with kindness and respect. But always have a plan ready to kill them.

Old USMC Adage.

gofy

  • Guest
Re: Profile Requests
« Reply #2 on: February 08, 2013, 10:48:59 AM »
1. USN Eurofighter, Tomcat 70's scheme, Please?

2. USN Rafale, modern day scheme

British Hornet, Eagle, and Tomcat?


Offline Cliffy B

  • Ship Whiffer Extraordinaire...master of Beyond Visual Range Modelling
  • Its ZOTT!!!
    • My Artwork
Re: Profile Requests
« Reply #3 on: February 09, 2013, 02:08:59 AM »
1. USN Eurofighter, Tomcat 70's scheme, Please?

2. USN Rafale, modern day scheme

British Hornet, Eagle, and Tomcat?

I can handle the Rafale request as I have a blank already drawn up for the two-seater.  Any specific squadron/paint scheme?  I'll get to it in the coming few weeks.
"Radials growl, inlines purr, jets blow!"  -Anonymous

"Helos don't fly.  They vibrate so violently that the ground rejects them."  -Tom Clancy

"If all else fails, call in an air strike."  -Anonymous

gofy

  • Guest
Re: Profile Requests
« Reply #4 on: February 09, 2013, 08:26:01 AM »
VFA-31 or VF-111 (Sundowners in CAG Tomcat Scheme, please)

Re: Profile Requests
« Reply #5 on: February 17, 2013, 01:46:47 PM »
Hi Everyone!

Could someone do a line profile of this aircraft for me?
It's a Sreya, SA-6 Envoy.

Thanks!

Chuck
Refugee from the What-If Modeller's Forum!
USAF Veteran

Offline dy031101

  • Yuri Fanboy and making cute stuff practical- at least that's the plan anyway
  • Prefers Guns And Tanks Over Swords And Magic
Re: Profile Requests
« Reply #6 on: March 01, 2013, 12:54:32 PM »
I want to include some tri-motor Cutlass in one of my next Shipbucket graph-bash...... but the side drawing available to me is a bit messy due to the author's desire to show the engine arrangement.

Would someone like to tackle this and produce a side view that can be used both for doing profiles and as a template for Shipbucket-style icon?  A top view is included if it helps determining what goes where, as is a failed past attempt of mine.

Thanks in advance.
« Last Edit: March 01, 2013, 01:01:24 PM by dy031101 »
Forget about his bow and arrows- why wait until that sparrow has done his deed when I can just bury him right now 'cause I'm sick and tired of hearing why he wants to have his way with the cock robin!?

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #7 on: March 21, 2013, 03:27:23 AM »
V-22 in US Forest Service fire bomber markings.

Offline buckeyecapsfan19

  • Newly Joined - Welcome me!
Re: Profile Requests
« Reply #8 on: August 02, 2013, 02:37:24 AM »
Blank for F-16E? (Block 60)

Offline perttime

  • The man has produced a Finnish Napier Heston Fighter...need we say more?
Re: Profile Requests
« Reply #9 on: August 02, 2013, 03:38:19 AM »
I wonder if this guy draws his own blanks:
http://www.topgunchen.com/page/album_detail.asp?album_id=874

The image in the page is reduced a little. His blank is in the background. Tracing it would be a bit of work...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #10 on: August 03, 2013, 02:23:19 AM »
Well his/her email is on the image (bottom left corner) so you could email them to ask.
All hail the God of Frustration!!!

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #11 on: August 03, 2013, 04:11:59 AM »
Maybe also try contacting one of our members, Clave.  He has done profiles before of such (see below for example)

All hail the God of Frustration!!!

Offline perttime

  • The man has produced a Finnish Napier Heston Fighter...need we say more?
Re: Profile Requests
« Reply #12 on: August 03, 2013, 04:50:29 PM »
Wow, somehow I'd missed that Clave had done a Block 60 F-16.

... maybe I just don't pay much attention to F-16 blocks. Usually the long and short fin bases are difference enough for me...

Offline buckeyecapsfan19

  • Newly Joined - Welcome me!
Re: Profile Requests
« Reply #13 on: August 05, 2013, 06:16:08 AM »
I contacted Clave over on DeviantArt and will see what happens from there. Greg, check your PM...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #14 on: August 06, 2013, 06:03:32 PM »
Anyone up for some carrier based Eurofighter Typhoons?
All hail the God of Frustration!!!

Offline Nexus1171

  • SC
  • I go by many names...you may know one...
Re: Profile Requests
« Reply #15 on: October 12, 2013, 06:45:40 AM »
I was thinking up a hypersonic aircraft idea and I'm wondering if anybody is willing to help out?


Sincerely,
Robyn *who secretly wonders if she can get somebody like Jose F, or Apophenia for the project*


Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #16 on: October 13, 2013, 04:43:24 AM »
How about you make a start yourself rather than constantly asking others to do the work for you.  This way, you do the work your self (which gives you the satisfaction of creating it), have a better idea of what you are thinking of  and get to practise.  The more you do the better one gets.  Others may then either offer input/advice or even help you with the drawing.
All hail the God of Frustration!!!

Offline Nexus1171

  • SC
  • I go by many names...you may know one...
Re: Profile Requests
« Reply #17 on: December 05, 2013, 12:26:27 PM »
GTX Admin

I have a few basic images which I have stored away on my computer.  I could do a crude drawing when I get around to it to illustrate what I'm looking for in basic terms

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #18 on: December 05, 2013, 04:29:46 PM »
Sounds good.
All hail the God of Frustration!!!

Offline Logan Hartke

  • High priest in the black arts of profiling...
  • Rivet-counting whiffer
Re: Profile Requests
« Reply #19 on: December 05, 2013, 11:26:02 PM »
A crude drawing from AutoCAD exported to MS Paint for color was how I started.  Your first few profiles will be bad.  Mine certainly were!  You have to start somewhere, though!  Good luck and feel free to post on here if you have any questions!



Cheers,

Logan

Offline Damian

  • Some of his profiles take longer to do than kits I've made...
  • Did you miss me?
Re: Profile Requests
« Reply #20 on: January 07, 2014, 11:46:35 AM »
A crude drawing from AutoCAD exported to MS Paint for color was how I started.  Your first few profiles will be bad.  Mine certainly were!  You have to start somewhere, though!  Good luck and feel free to post on here if you have any questions!



Cheers,

Logan


I agree with Logan, below is my first profile. Take that first step, we all have our own artistic vision and where better to share it than here :)

Sic gorgiamus allos subjectatos nunc

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #21 on: June 15, 2014, 12:28:53 PM »
A V-22 in US Forest Service airborne tanker markings, it could be a natural in between what conventional helicopters and do and the passes by faster moving large piston and turbine aircraft.

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: Profile Requests
« Reply #22 on: July 03, 2014, 11:51:09 PM »
A crude drawing from AutoCAD exported to MS Paint for color was how I started.  Your first few profiles will be bad.  Mine certainly were!  You have to start somewhere, though!  Good luck and feel free to post on here if you have any questions!
glosterfighterearlypaintscheme.jpg
Cheers,
Logan
Logan, your drawing inspired me to make a twin-boom derivative... (made with Corel PhotoPaint6):

Offline Logan Hartke

  • High priest in the black arts of profiling...
  • Rivet-counting whiffer
Re: Profile Requests
« Reply #23 on: July 04, 2014, 12:06:51 AM »
I'm happy to have provided inspiration. I revisited that design a little later and here's an example of one of those updated profiles. Keep in mind that this one is still over 8 years old.



Cheers,

Logan

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: Profile Requests
« Reply #24 on: July 04, 2014, 09:14:10 AM »
Great! :-*

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #25 on: July 11, 2014, 12:42:53 PM »
Along the lines of my last request, Japanese V-22s.  I can visualize at least three, one on the OD scheme their transport V-107s use, one in a SAR scheme, and a "maritime assault" one in the two-tone blue used by their over-water strikes (F-4EJ, F-1, F-2).  I suspect you could several variations on the SAR scheme.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #26 on: August 10, 2014, 08:19:01 AM »
Since the squadron's 100 anniversary is coming up in 1918, I could see the 95th Reconnaissance Squadron, which currently operates "Rivet Joint" aircraft painting up on in special markings, derived, say, from those the squadron's P-26 aircraft wore in the 1930's, yellow trim on light blue with the red, white, and blue rudder stripes and yellow wings.  That could make for a marvelous scheme on a Rivet Joint airframe.

Offline Bryan H.

  • Newly Joined - Welcome me!
Re: Profile Requests
« Reply #27 on: April 23, 2015, 01:35:53 AM »
Almost out of RN school and about to resume modeling, been a loooong time...  :) I've got a couple of Whifs ideas I'd like to complete for the Extended Life group build.  I'm looking to build an Irish Air Corps A-4 Skyhawk & Mirage F.1; both post-modernization.  I tried the search function for some suitable schemes but not finding anything.  I was thinking of the following schemes:

1) overall medium/dark/olive green (like Danish Drakens or late RNZAF A-4's)
2) olive/medium green over grey (similar to current IAAC camo scheme)
3) wraparound medium green and grey (like French Mirage F.1CT's) or
4) wraparound Euro 1 scheme (like RNZAF A-4's)

I'd like the A-4 and Mirage to have matching schemes

Any other ideas?  Any profiles I might have missed that would be good inspiration?

Thanks, cheers and happy modeling, Bryan

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: CAC-CA-31 Profile Request please
« Reply #28 on: October 31, 2015, 06:44:21 AM »
Just found these beautiful photographs of the Australian CAC CA-31-007 mock-up at Australian National Aviation Museum, Moorabbin Sept 2014 (Photo by Brendan Cowan) at:
 
http://www.adf-gallery.com.au/gallery/CAC-CA-31/07_09_2014_CA31_007_Brendan_Cowan_0050

Dam! The last time I visited ANAM Moorabbin, this mock-up was in pieces and stored unceremoniously in a corner  :(

I would sincerely appreciate anyone who was able and willing to do a couple of detailed profiles of the CA-31 design in both proposed single and two-seat configurations – armed in the ground attack and lightweight fighter (gun pod on centreline, and a couple of Aim-9 Sidewinder's) configuration!
I envisage this lightweight ground attack / fighter being employed in Citizen Air Force Squadrons of:   
No 21 (City of Melbourne) Squadron
No 22 (City of Sydney) Squadron
No 23 (City of Brisbane) Squadron
No 24 (City of Adelaide) Squadron
No 25 (City of Perth) Squadron
(Thanks GTX  ;))
The CA-31 would complement the regular RAAF Mirage III's in a high/low type of mix, as well as performing advance training and lead-in fighter training.

I can also see the likes of India (instead of HAL Ajeet!), Malaysia and Singapore potentially employing the CA-31 design as a cost-effective lightweight ground attack fighter, if it was marketed properly by Australian Government  ;)

I'm sorry, but I have had no luck finding high res drawings  :(
But I will post what I have!

Thanks in advance

M.A.D
« Last Edit: November 01, 2015, 04:42:47 PM by M.A.D »

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #29 on: October 31, 2015, 08:22:26 AM »
and a couple more pics....

If possible, I would also appreciate the incorporation of the French MATRA JK-200 weapons-drop tank systems, which combines 313lt fuel, 18 x 68mm FFAR and 4 x 250 lb bombs! This will afford the CA-31 to carrying a weapons load of 1815 kg on its four wing and two fuselage hardpoints!

M.A.D
« Last Edit: October 31, 2015, 11:56:11 AM by M.A.D »

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: Profile Requests
« Reply #30 on: October 31, 2015, 06:01:40 PM »
and a couple more pics....

If possible, I would also appreciate the incorporation of the French MATRA JK-200 weapons-drop tank systems, which combines 313lt fuel, 18 x 68mm FFAR and 4 x 250 lb bombs! This will afford the CA-31 to carrying a weapons load of 1815 kg on its four wing and two fuselage hardpoints!

M.A.D

I've never seen the bomb, drop tank system before, wow, the ideas now spiralling, out of control, from my already chaotic imagination!

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #31 on: October 31, 2015, 08:07:59 PM »
I hear you Volkodav!
I thought the same thing the first time I saw the configuration. It begs the question why it hasn't been as popular? I guess the configuration is somewhat of a compromise, and I dear say a lot of aerodynamic drag!

M.A.D

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #32 on: November 01, 2015, 10:04:52 PM »
Does anyone produce the JK-200 in styrene, resin, etc.?  It would fit nicely with a build I'm working up.  Particularly if it could carry LGB's.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #33 on: November 02, 2015, 02:31:48 AM »
Does anyone produce the JK-200 in styrene, resin, etc.?  It would fit nicely with a build I'm working up.  Particularly if it could carry LGB's.


Antarki Model Kits Perú produce the related JL-100 in both 1/48 and 1/72:



Looking at the image below, it should be possible to convert into the larger JK-200:



BTW, can anyone actually confirm if the JK200 is real?  I ask since you can find reference to the JL100 and the RPK10 which is the bomb carrying fuel tank (see below) but no JK200:

« Last Edit: November 02, 2015, 02:55:29 AM by GTX_Admin »
All hail the God of Frustration!!!

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #34 on: November 02, 2015, 06:00:36 PM »
Quote
BTW, can anyone actually confirm if the JK200 is real?  I ask since you can find reference to the JL100 and the RPK10 which is the bomb carrying fuel tank (see below) but no JK200

Yeah, Im hearing what you are say Greg!
Looking a little deeper on the web......


M.A.D
« Last Edit: November 02, 2015, 08:44:32 PM by M.A.D »

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #35 on: February 18, 2016, 06:55:08 AM »
G'day gent's!
I'm looking for some buddying profiler's to collaborate with me on a couple of Alternative History stories please?
I have the following in mind:
- Alternative Australian Defence Force ORBAT

- An Australian collaboration with Agusta to licensed manufacture and deploy Agusta A129 LBH (Light Battlefield Helicopter). Impressed with the costs and capability of the A129 Mangusta and A129 LBH combination, it is adopted by other army's and air forces, including the US Army, under the 'Austerity LHX Program,' after Bernie Sanders becomes President, and forces the Pentagon to get it's house into order.....!

- An alternative Soviet Frontline Bomber, which uses and refines the Sukhoi T6 into a TRSki-type design, instead of the heavier, more complex variable-geometry winged Su-24 'Fencer'......

- An alternative Soviet Shturmovik, which utilises the earlier, smaller, lighter and cheaper Suhkoi LSSh/SPB design, that would become the Su-25 'Frogfoot'. This smaller specialised and affordable ground attack/anti-armour capability proliferates throughout the Middle East and African conflicts.......!

If interested, able and willing, please PM me!

M.A.D 
« Last Edit: February 18, 2016, 01:39:09 PM by M.A.D »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #36 on: February 20, 2016, 12:44:01 PM »

- An alternative Soviet Frontline Bomber, which uses and refines the Sukhoi T6 into a TRSki-type design, instead of the heavier, more complex variable-geometry winged Su-24 'Fencer'......



Here's one - it still has the original Su-19 designation though:

All hail the God of Frustration!!!

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #37 on: March 26, 2016, 08:27:12 AM »
Ok gents.....starting to make some head-way with my 'Alternative ADF ORBAT,' thanks greatly to the efforts and talents of other forum members.
Staring to comb this forum for some supportive profiles to complement this endeavour.....

What I'm looking for is a coloured profile of the Turkish FNSS ACV-S tracked armoured combat vehicle. This vehicle is very similar in looks/profile to the YPR-765, but is somewhat stretched and with six-road wheels, as opposed to the YPR-765's five-road wheel configuration.

Note I've attached picture of FNSS ACV-S tracked armoured combat vehicle, and a profile artist work of the YPR-765, as to give an idea of what I'm after!  ;)

Thanks in advance!

M.A.D

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #38 on: March 29, 2016, 10:12:52 AM »
Ok, with the encouragement of fellow forum members [Logan & Carlos (Ysi_maniac)], I've had a crack at doing some profiling using 'Paint' program... so here's my 'stretched' YPR-765/ACV-S, that will be the basis for one of the competitions for the chassis for the Australian Army 'tracked armoured combat vehicle' series for the late 1970's, thus far!
Please note, I've edited this profile from an existing profile from the amazing website http://www.tanks-encyclopedia.com/coldwar/US/M113_APC.php By TEadmin

M.A.D 
« Last Edit: March 30, 2016, 06:38:07 PM by M.A.D »

Offline Logan Hartke

  • High priest in the black arts of profiling...
  • Rivet-counting whiffer
Re: Profile Requests
« Reply #39 on: March 29, 2016, 09:18:46 PM »
Looks better than my first attempts. Everyone has to start somewhere. Great job, keep at it!

Cheers,

Logan

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #40 on: March 31, 2016, 02:54:20 PM »
Thanks' heaps Logan!
As I've stated, I'm simply using, chopping and pasting existing profiles!
I have a long ardours crawl, before I can even begin to think about walking next to you, with your amazing talent and skills! But thanks' mate, it means a lot coming from you!!

M.A.D

Offline arc3371

  • Takes no responsibility should anyone try to turn the drawings into plastic...but we will still hold him accountable for the madness that ensues!!!
Re: Profile Requests
« Reply #41 on: April 14, 2016, 04:03:09 AM »
Any one willing to make a Rhodesian Saab 35 D Draken? Its for a nationsim

Offline PantherG

  • I´m only poor mad modeller....
Re: Profile Requests
« Reply #42 on: April 15, 2016, 03:50:31 AM »
Rhodesian Drakken? And camouflage colous what You want?

Offline arc3371

  • Takes no responsibility should anyone try to turn the drawings into plastic...but we will still hold him accountable for the madness that ensues!!!
Re: Profile Requests
« Reply #43 on: April 15, 2016, 07:59:05 AM »
Same camo and markings as the Vampires and Hunters

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #44 on: April 15, 2016, 02:03:04 PM »
Same camo and markings as the Vampires and Hunters


For reference:





All hail the God of Frustration!!!

Offline arc3371

  • Takes no responsibility should anyone try to turn the drawings into plastic...but we will still hold him accountable for the madness that ensues!!!
Re: Profile Requests
« Reply #45 on: April 15, 2016, 09:10:04 PM »
Thanks GTX

Offline PantherG

  • I´m only poor mad modeller....
Re: Profile Requests
« Reply #46 on: April 24, 2016, 07:37:14 PM »
Our customer - our master....

arc3371 : look here - http://beyondthesprues.com/Forum/index.php?topic=378.735

Offline ptdockyard

  • Newly Joined - Welcome me!
Re: Profile Requests
« Reply #47 on: May 07, 2016, 12:44:27 AM »
Has anyone done a naval version of the Republic P-43 Lancer yet?

Dave G

Offline ysi_maniac

  • I will die understanding not this world
Re: Profile Requests
« Reply #48 on: June 04, 2016, 05:08:11 AM »
Can you find a 3 view drawing of Sikorsky S-58 or Westland Wessex? This is the best I have found that I think is not good enough.

http://aviadejavu.ru/Images6/AI/AI57-10/25-2.jpg
« Last Edit: June 04, 2016, 05:18:59 AM by ysi_maniac »

Offline AXOR

  • Our returned Monkey Box man
Re: Profile Requests
« Reply #49 on: June 04, 2016, 05:41:24 AM »
Alex

Offline ysi_maniac

  • I will die understanding not this world
Re: Profile Requests
« Reply #50 on: July 07, 2016, 05:44:28 AM »
Thanks.

Offline ysi_maniac

  • I will die understanding not this world
Re: Profile Requests
« Reply #51 on: July 17, 2016, 03:49:01 PM »
Can you find a 3 view drawing of Kawasaki P-1?

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Global Moderator
  • Stylishly late...because he was reading comics
Re: Profile Requests
« Reply #52 on: October 16, 2016, 03:51:39 AM »
Trying to get into the Profilling game and I am looking for a nice line drawing of some GE F110 exhausts. The problem I am encountering is on most 3 view profiles there is a Horizontal stab, or tailfin interfering:
 

 
 
Or its a great view, but the wrong engine:
 

 
Any help is appreciated, the larger the better.
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #53 on: October 16, 2016, 04:19:19 AM »
Your own pics aren't showing mate...
All hail the God of Frustration!!!

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
    • SketchUp 3D Warehouse - My Digital Models
Re: Profile Requests
« Reply #54 on: October 16, 2016, 06:59:01 AM »
Your own pics aren't showing mate...

@Ben,

The domain name is missing on both links. 

Need something to fill in the blanks to make it work:

h t t p ://f14-history-f14x-st21.g i f

h t t p ://f-16c_profile10.p n g 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #55 on: October 16, 2016, 10:11:50 AM »
Trying to get into the Profilling game and I am looking for a nice line drawing of some GE F110 exhausts. The problem I am encountering is on most 3 view profiles there is a Horizontal stab, or tailfin interfering:
 

 
 
Or its a great view, but the wrong engine:
 

 
Any help is appreciated, the larger the better.

If you can find good F404/414 nozzles, scale them up to 150% and you have F110 nozzles.  According to GE, the two nozzles have the same non-dimensionalized loft lines.

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Global Moderator
  • Stylishly late...because he was reading comics
Re: Profile Requests
« Reply #56 on: October 16, 2016, 09:40:35 PM »
Sorry everyone, let me try again:

Correct engine, obscured:



Great view, Wrong engine



 :)
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #57 on: October 28, 2016, 11:48:40 AM »
A recent issue of Scale Aircraft Modelling, the one with the B-36 on the cover, has a four-view of a RA-3B in a 4-tone grey camouflage scheme.  I'd like to see this applied to a RA-5C.  I can supply a scan of that scheme if needed.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #58 on: October 29, 2016, 05:34:14 AM »
Trying to get into the Profilling game and I am looking for a nice line drawing of some GE F110 exhausts. The problem I am encountering is on most 3 view profiles there is a Horizontal stab, or tailfin interfering:
 

Can you use this ...with some modification.
All hail the God of Frustration!!!

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Global Moderator
  • Stylishly late...because he was reading comics
Re: Profile Requests
« Reply #59 on: November 04, 2016, 12:01:07 AM »
Trying to get into the Profilling game and I am looking for a nice line drawing of some GE F110 exhausts. The problem I am encountering is on most 3 view profiles there is a Horizontal stab, or tailfin interfering:
 

Can you use this ...with some modification.

That's great thank you!!
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #60 on: February 07, 2017, 09:09:14 AM »

G'day gents
I’m putting out a request for a couple of profiles if I may, pertaining to the Agusta A139 LBH (Light Battlefield Helicopter) and the A129 Mangusta International (Scorpion) in Australian Army helicopter type camouflage, for my 'Alternative ADF ORBAT'

Thank's in advance

M.A.D

Offline apophenia

  • Suffered two full days of rapid-fire hallucinations and yet had not a single usuable whif concept in the lot !?!
  • Patterns? What patterns?
Re: Profile Requests
« Reply #61 on: February 08, 2017, 01:42:09 AM »
Out of curiosity, what is the difference between the AW139 LUH and the LBH besides armament? Was the Light Battlefield Helicopter a precursor of the AW139M variant? Did the LBH have anything like the sensor fit of the Italian HH-139A?
Under investigation by the Committee of State Sanctioned Modelling, Alternative History and Tractor Carburettor Production for decadent counterrevolutionary behaviour.

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #62 on: February 08, 2017, 02:40:44 AM »
G'day apophenia
As far as I'm aware mate, they are two completely different designs. I personally always knew the Agusta LBH as the A129 LBH, but more recently I was made to believe that it's designation was A139 LBH - hence the confusion with the A139 LUH you refer to!
I have a neat profile of the A129 LBH/A139 LBH, but can't post because of its size, but will have a gI tonight in reducing and posting.

M.A.D
« Last Edit: February 08, 2017, 06:27:12 AM by M.A.D »

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #63 on: February 08, 2017, 10:17:47 AM »
Ok, here we go apophenia
Unable to adjust size of picture, so I found the drawing here http://www.secretprojects.co.uk/forum/index.php/topic,869.15.html
It's in Reply #27, the profile drawing of the Light Battlefield Helicopter (the one with the 12.7mm turreted gun)

M.A.D

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #64 on: February 20, 2017, 05:42:44 AM »
Can I enquire as to forum members who are adapt to ship profiles or a member of Shipbucket website, who'd be interested in doing some ship profiles for my 'Alternative ADF ORBAT'?

Thank's in advance

M.A.D

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: Profile Requests
« Reply #65 on: February 20, 2017, 07:37:24 PM »
Can I enquire as to forum members who are adapt to ship profiles or a member of Shipbucket website, who'd be interested in doing some ship profiles for my 'Alternative ADF ORBAT'?

Thank's in advance

M.A.D

I dob in Weaver!

Offline Gingie

  • The LAV sausage-maker…goes nice with a home made beer I understand
  • Has been to Tatooine...
Batmobile tumbler with tracks?
« Reply #66 on: February 22, 2017, 11:28:57 AM »
Wondering what the Batmobile "tumbler" would look like with all the wheels removed, and a run of tracks on each side?

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #67 on: March 29, 2017, 05:17:55 PM »
Do we have a resident Fairey Gannet and Grumman E-1 Tracer profiler?

M.A.D

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #68 on: April 11, 2017, 10:07:39 PM »
Gent's, Im putting out a profile request for a modified Boeing B-50 with Pratt & Whitney T34 turboprop (engine arrangement same as Boeing YC-97J) and fitted with the Grumman E-1B Tracer radome, containing its AN/APS-82 radar, over its forward fuselage, and in 1950's RAAF markings please.

Thanks for your consideration

M.A.D

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #69 on: April 15, 2017, 03:54:27 AM »
This might help:



Remaining detailed discussion that was here has been moved to the B-29 thread in the Ideas and Inspiration area.
All hail the God of Frustration!!!

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #70 on: April 15, 2017, 08:11:40 AM »

Acknowledge your last!

M.A.D

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #71 on: April 17, 2017, 08:42:13 AM »
Can I enquire as to forum members who are adapt to ship profiles or a member of Shipbucket website, who'd be interested in doing some ship profiles for my 'Alternative ADF ORBAT'?

Thank's in advance

M.A.D

I dob in Weaver!


That's what mates are for  ;)

M.A.D
« Last Edit: April 17, 2017, 09:50:40 AM by M.A.D »

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #72 on: April 17, 2017, 10:46:33 AM »
Do we have a resident Fairey Gannet and Grumman E-1 Tracer profiler?

M.A.D

I would greatly appreciate if someone could do a profile of this Fairey Gannet AEW Mk. 7 proposal in a late 1960's Royal Australian Navy colours and markings, as too a Grumman E-1 Tracer!!

M.A.D

Offline Artoor_K

  • On the run from Polish Rivet Counters...
  • Use the power of your dreams!
Re: Profile Requests
« Reply #73 on: May 30, 2017, 12:56:18 AM »
I would be extremely pleased if someone could do a profile of F-4J Phantom in lo-vis polish markings as a navy fighter from ORP Anders polish carrier :) This will be a basis for a model :)
Sickening, weakening
Don't let another somber pariah consume your soul
You need strengthening, toughening
It takes a bit of dark to rekindle the fire burning in you
Ignite the fire within you

Online Jonesthetank

  • Almost as dumb as I look
Re: Profile Requests
« Reply #74 on: June 14, 2017, 03:33:35 AM »
Artoor,

If no one else is doing this, I'd be happy to have a go at producing an F-4J for you.

Mark

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #75 on: September 12, 2017, 10:43:06 PM »
And now for something completely different, an electric railroad locomotive.  Specifically, a Pennsylvania Railroad GG1 but done in the colors and schemes of the (US) Great Northern Railroad.  It's not as outlandish as it seems, both used the same electrification scheme and they did work together on some prototype and development efforts; for that matter, when the GNRR phased out its electrified section, deisel-electrics having replaced them, a number of the electric locomotives went to the PRR.

Offline arc3371

  • Takes no responsibility should anyone try to turn the drawings into plastic...but we will still hold him accountable for the madness that ensues!!!
Re: Profile Requests
« Reply #76 on: September 17, 2017, 12:09:07 AM »
Wondering if anyone done an Egyptian JAS-39 either C or E variant?

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #77 on: September 29, 2017, 04:33:20 AM »
New request if anyone is interested:   Portuguese Air Force  EE Lightning
All hail the God of Frustration!!!

Offline JoseFern

  • Has gone by many names...we simply prefer "Genius"
Re: Profile Requests
« Reply #78 on: October 01, 2017, 02:18:22 AM »
« Last Edit: October 01, 2017, 02:20:32 AM by JoseFern »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Profile Requests
« Reply #79 on: October 01, 2017, 02:24:52 AM »
JP Vieira made one...
http://beyondthesprues.com/Forum/index.php?topic=15.msg9585#msg9585


I will have to take your word for it since all I see is the Photoshop "anti-user symbol"
All hail the God of Frustration!!!

Offline apophenia

  • Suffered two full days of rapid-fire hallucinations and yet had not a single usuable whif concept in the lot !?!
  • Patterns? What patterns?
Re: Profile Requests
« Reply #80 on: October 01, 2017, 06:03:22 AM »
New request if anyone is interested:   Portuguese Air Force  EE Lightning


My take on FAP Lightnings: http://beyondthesprues.com/Forum/index.php?topic=351.msg131576#msg131576
Under investigation by the Committee of State Sanctioned Modelling, Alternative History and Tractor Carburettor Production for decadent counterrevolutionary behaviour.

Offline JoseFern

  • Has gone by many names...we simply prefer "Genius"
Re: Profile Requests
« Reply #81 on: October 01, 2017, 06:00:28 PM »
JP Vieira made one...
http://beyondthesprues.com/Forum/index.php?topic=15.msg9585#msg9585


I will have to take your word for it since all I see is the Photoshop "anti-user symbol"

JP's profile depicts an alternative to the A-7P Corsair II  and wears the same paint scheme as this aircraft...
http://www.clubhyper.com/reference/a7pjh_1.htm

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Profile Requests
« Reply #82 on: November 07, 2017, 10:28:04 AM »
A follow-up to my post of 9/12/17, this time going the other way.  When the (US) Great Northern Railroad ended its operation of electrified (overhead catenary) lines, it sold 7 box-cab Y-2's and 1 streamlined Y-2a to the Pennsylvania Railroad who classified the box-cabs as Class FF-2, numbers 1 - 7, and used the Y-2a as a source of spare parts.  My whif would be the Y-2a, classified as a FF-2a, and painted in PRR Brunswick Green with gold strip on each side as on the PRR's diesels of similar contours.  I can supply data and drawings of the Y-2a if anyone wishes to attempt this.

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests for a Multirole Naval Platform (MRNP) please
« Reply #83 on: November 19, 2017, 03:11:50 PM »
G'day

I'm putting out a request for a 'ship profiler' to do me a specialised Multirole Naval Platform (MRNP) ship profile please! :P

Anyone able and willing, please PM me  ;)

M.A.D

Offline M.A.D

  • Also likes a bit of arse...
  • Wrote a great story about a Christmas Air Battle
Re: Profile Requests
« Reply #84 on: April 18, 2018, 07:04:43 PM »
G'day all

I'm after a couple of 'WhatIf'  Boeing B-47 Stratojet and North American A-5C Vigilante profiles please!
Anyone able and willing?
If so, please PM me for specifics  ;)


M.A.D

« Last Edit: April 21, 2018, 06:37:28 AM by M.A.D »