Author Topic: FAR Resin Is now out of business  (Read 2479 times)

Re: FAR Resin Is now out of business
« Reply #15 on: January 10, 2019, 04:23:43 AM »
Hello Steven,

Your TSR.2 set looks gorgeous  :-*

Do you other variants of this set in plan ?
I see that the set is based on the Airfix kit, do you think that it will be OK for a Dynavector one too ?
Do you have photo with the longer nose cone you offer in the set ?
Last question, do you have any idea for shipping cost to France ?

Thanks in advance for your reply  :D

Damien

Re: FAR Resin Is now out of business
« Reply #16 on: January 10, 2019, 04:01:07 PM »
Thanks for the reply Steven :smiley:

Shipping cost are a little expensive but now that I know you are from USA, I'm not surprised... It is always expensive to order in USA from France :icon_crap:
The longer nose looks really good on the aircraft, thanks for the pic. I will have to check about the difference between Airfix & Dynavector but as far as I remember, the front fuselage is narrower on the Airfix.

Damien

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: FAR Resin Is now out of business
« Reply #17 on: January 11, 2019, 02:32:19 AM »
Yes, I have plans for an EF-TSR.2 that includes a new tail with the "football", belly canoe, an AGM-78 Standard MKII with launch rail and a USAF type air-to-air refueling receptacle. All the master parts are done, wait to see how sells go with GR.4 set before I start molding and casting.

Are you able to share photos of the master parts?  Very interested in this one as I plan to do a Italian EF-TSR.2 in this scheme:

All hail the God of Frustration!!!

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: FAR Resin Is now out of business
« Reply #18 on: March 13, 2019, 01:49:37 AM »
 :smiley:
All hail the God of Frustration!!!

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
    • SketchUp 3D Warehouse - My Digital Models
Re: FAR Resin Is now out of business
« Reply #19 on: March 15, 2019, 07:05:53 AM »
Seeing your JP233 makes me wish I had never purchased all of those horrible Airfix Tornado kits just for the weapons. 

I hope that you find the time to focus on possible upgrades to the 1/48th scale HobbyBoss F-23 kit as it really needs some attention,  Wing pylons for fuel and weapons are a high on my wish list.   
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: FAR Resin Is now out of business
« Reply #20 on: March 16, 2019, 02:47:34 AM »
I'm curious, what items would you guys like to see me offer in 1/48 scale?

Oh, the possibilities....

Are you able to provide any sort of boundaries/restrictions?  For instance, size limitations, types of product?  Era?
All hail the God of Frustration!!!

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: FAR Resin Is now out of business
« Reply #21 on: March 17, 2019, 01:19:20 PM »
Well, I, for one, would like to see some AGM-137A TSSAM missiles as stores.  I can advise on how to tweak the available drawing to show the "carry" configuration as opposed to the "flying" configuration of the 3-view.  I also can advise on what and where to modify for an extended range version that was studied for a proposal to the RAF.

A second item I'd love to see was the Northrop-Ventura ND-1 proposal for an integral rocket-ramjet powered submunitions dispenser that could be conformally carried on even a F-3E/F-20 class aircraft.

One item that would, IMHO, be interesting would be an AIM-54X Phoenix-ER missile in which the solid rocket motor is replaced by an integral rocket-ramjet motor with four intakes at the leading edges of the fins, somewhat in the Russian style used on the Kh-31. Alternatively, a different Phoenix ER with a booster stage added.  Or, combine the two for a Phoenix-XLR with both the booster stage and the integral rocket-ramjet motor.

For people who want a different-looking AAM, an AIM-162 air-launched version of the main stage of the RIM-162 ESSM.

Going back a ways, how about a 1/48 AAM-N-10 Eagle

Final thought would be operational variants of the Vought ALVRJ test vehicle, either for ASM or AAM purposes.
« Last Edit: March 17, 2019, 01:22:15 PM by elmayerle »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: FAR Resin Is now out of business
« Reply #22 on: March 18, 2019, 02:00:35 AM »
One I would love to see would be a conversion to do a Westland Wyvern TF.1 with the original RR Eagle engine:




Also, just a simple Mistel Conversion nose & support struts (thus saving the purchase of entire kits):



One can get these in 1/72 and 1/32 but I don't believe there is anything in 1/48 that doesn't require the purchase of a full kit with the aircraft.
All hail the God of Frustration!!!

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: FAR Resin Is now out of business
« Reply #23 on: March 18, 2019, 06:38:42 AM »
Keep the ideas coming  :smiley:

Quote
Final thought would be operational variants of the Vought ALVRJ test vehicle

The hsiung feng III from Taiwan looks very similar.
Definitely a resemblance.  Be interesting to see an air-launched variant of the Hsiung Feng III carried under a F-CK-1C or -1D; more likely a pair, one under each wing.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: FAR Resin Is now out of business
« Reply #24 on: March 20, 2019, 02:06:57 AM »
A couple more suggestions in 1/48:

Conversion to do a 1/48 Panavia Tornado 2000:




Conversion to do a 1/48 MiG-21-93 or MiG-21 "Bison":





Conversion to do a 1/48 Mirage F1-M53/F1E - in other words, the slightly stretched SNECMA M53 powered version that was offered to the Europeans in the '70s in competition to the F-16:




F-16-79 with GE J-79 engine:


All hail the God of Frustration!!!

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
    • SketchUp 3D Warehouse - My Digital Models
Re: FAR Resin Is now out of business
« Reply #25 on: March 20, 2019, 09:32:18 AM »
1:48th scale AGM-69 SRAM and AGM-131 SRAM-II would be nice to see.  While the Revell B-One does include blobs of plastic with an AGM-69 SRAM shape they are far from ideal thanks to the trench-sized seams and very chunky control fins.  Both subjects would be a nice addition for what-if and all of those poor souls that own the Revell B-One kit. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Global Moderator
  • Stylishly late...because he was reading comics
Re: FAR Resin Is now out of business
« Reply #26 on: March 21, 2019, 04:52:52 AM »
I'm curious, what items would you guys like to see me offer in 1/48 scale? If there are multiple require for the same item, I will see what I can. But if it is a bunch of one off items, forget it.  Please no 1/72 scale.


Steven




This one might be pretty easy and get some decent attention  :smiley:




F-111B?

« Last Edit: March 21, 2019, 04:56:49 AM by taiidantomcat »
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • I'd rather be dirtbike riding
Re: FAR Resin Is now out of business
« Reply #27 on: March 21, 2019, 07:22:35 AM »
TC, is that a conformal tank plus AIM-54 launcher ?

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Global Moderator
  • Stylishly late...because he was reading comics
Re: FAR Resin Is now out of business
« Reply #28 on: March 21, 2019, 08:51:21 AM »
TC, is that a conformal tank plus AIM-54 launcher ?

Yep!
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • I'd rather be dirtbike riding
Re: FAR Resin Is now out of business
« Reply #29 on: March 21, 2019, 09:13:18 PM »
TC, is that a conformal tank plus AIM-54 launcher ?

Yep!

Anymore photos of it ?