Beyond The Sprues

Current and Finished Projects => Physical Models => Land => Topic started by: kpnuts on June 13, 2015, 09:31:37 PM

Title: Heller Kwak z1
Post by: kpnuts on June 13, 2015, 09:31:37 PM
Hi all I ordered 2 bikes off ebay yesterday, well amazingly one of them came today
(http://i.imgur.com/nGt9UPD.jpg)

(http://i.imgur.com/mCigFiK.jpg)
of course the first thing I did was a sprue count (did it 3 times)
(http://i.imgur.com/dwX7eaP.jpg)
I must say I am quite dissapointed, it's not in the same league as the La Reale there are sink holes and seams all over the place (hope the honda is better. I tried to photo them but they dont really show up in the pics, still on with the show.
(http://i.imgur.com/5eWXI5f.jpg)

(http://i.imgur.com/RWdgEYG.jpg)

(http://i.imgur.com/YMj5CxL.jpg)

(http://i.imgur.com/nXKH6iZ.jpg)
Title: Re: Heller Kwak z1
Post by: kpnuts on June 15, 2015, 12:06:58 AM
Hi all well this kit is deffo going to be a challenge the frame is full of sink holes and seams also the tank and side panels are moulded in two halves have no locating pins and are warped to hell.
I have glued some tabs to one half and am hoping that the wont foul on anything when it comes to putting it on, and also that it will help with lining everything up, fingers crossed.
(http://i.imgur.com/qKByX0F.jpg)

(http://i.imgur.com/1SwvKy9.jpg)

(http://i.imgur.com/ZQw7nY2.jpg)

(http://i.imgur.com/JL9FsBd.jpg)

(http://i.imgur.com/pS5F5Cw.jpg)

(http://i.imgur.com/bUgGlkW.jpg)
Title: Re: Heller Kwak z1
Post by: kpnuts on June 16, 2015, 02:12:23 AM
Hi all well this is the most twisted piece of model I have ever worked on.
(http://i.imgur.com/C3dyHkh.jpg)

(http://i.imgur.com/8OiJxfV.jpg)

(http://i.imgur.com/zJ0Rokf.jpg)

I was wondering if I would be able to get it ligned up at all
But after Hurculean efforts
(http://i.imgur.com/hUuH2oU.jpg)

(http://i.imgur.com/sFyUcBa.jpg)

there are no decals in this kit for the paint work, instead there are these handy moulded lines
(http://i.imgur.com/jSCOhNh.jpg)
Handy that is if you want to do it as the box art, not if you want something diffrent so I had so sand all those off.

(http://i.imgur.com/LXecJst.jpg)

now to try the marbeling
(http://i.imgur.com/LXecJst.jpg)

(http://i.imgur.com/5Ez3P2U.jpg)

(http://i.imgur.com/3QZRTlz.jpg?1)

(http://i.imgur.com/rQmCJUb.jpg)
I am going to add at least one more colour to this so we will see how it turns out. No biggie if it dosnt work got plenty of oven cleaner.
Title: Re: Heller Kwak z1
Post by: kpnuts on June 17, 2015, 02:42:49 AM
Hi all finished the marbeling, and I have to say I am quite happy with it, it needs a few coats of varnish to level it out and finish it off but for a first go at it I am happy, I can see me using this a lot

(http://i.imgur.com/Zx1iY38.jpg)

(http://i.imgur.com/Un65Ng7.jpg)

(http://i.imgur.com/dlQS807.jpg)

(http://i.imgur.com/d0UTXTo.jpg)

(http://i.imgur.com/9n2r6Wg.jpg)

(http://i.imgur.com/kl5cnUO.jpg)

(http://i.imgur.com/WZdUUFD.jpg)

(http://i.imgur.com/vvPUujL.jpg)

(http://i.imgur.com/iXB5ePt.jpg)

(http://i.imgur.com/EIFE5Cd.jpg)

(http://i.imgur.com/NXUgnle.jpg)

(http://i.imgur.com/n2sAhcI.jpg)

(http://i.imgur.com/QGnllUX.jpg)
Title: Re: Heller Kwak z1
Post by: kpnuts on June 18, 2015, 02:47:43 AM
Hi all here is tonight offering
(http://i.imgur.com/TDDj9hU.jpg)

(http://i.imgur.com/JSChjRh.jpg)

(http://i.imgur.com/bjKZQ7u.jpg)

(http://i.imgur.com/YiQjO6v.jpg)
there is quite a bit I don't like about this kit, but the separate fins I do like, get more detail this way.
(http://i.imgur.com/YiQjO6v.jpg)

(http://i.imgur.com/KXzKcNr.jpg)

(http://i.imgur.com/K06UsWP.jpg)

(http://i.imgur.com/OJbA6g0.jpg)

(http://i.imgur.com/fJNw8xq.jpg)

(http://i.imgur.com/Mvocpon.jpg)

(http://i.imgur.com/BAXMjRw.jpg)

(http://i.imgur.com/Iv7jSgy.jpg)

(http://i.imgur.com/WtSV35f.jpg)
Title: Re: Heller Kwak z1
Post by: kpnuts on June 19, 2015, 02:31:27 AM
Hi all here is another update on this pig of a kit, it really is no where near the quality of the La Reale the chain is so warped I'm not even going to try to correct it the axles are not going to allow the wheels to rotate and even if they did it wouldnt last long, Why cant kit manufacturers get together and combine all the good thing they all do, then we would end up with fantastic kits.
I really hope the CB 750 K1  is not the same as this.
(http://i.imgur.com/8D6aNUe.jpg)

(http://i.imgur.com/vN8lGIW.jpg)

(http://i.imgur.com/zLveRBe.jpg)

(http://i.imgur.com/zYRBRo8.jpg)

(http://i.imgur.com/s8O8yRG.jpg)
I decided gold might go quite well with this colour scheme

(http://i.imgur.com/BEUB8i4.jpg)

(http://i.imgur.com/XjfBdO4.jpg)

(http://i.imgur.com/hTdN3ye.jpg)

(http://i.imgur.com/allVQ77.jpg)
Title: Re: Heller Kwak z1
Post by: kpnuts on June 20, 2015, 10:03:45 PM
Well after retrieving the bike from its unscheduled flight across the room (it must be fairly aerodynamic as no breakages just some unguleing) and searching, took me nearly half an hour to find the back of the rear caliper, and almost as long to get it back on, since it's all installed on the rear wheel. I've decided to cut the top length of the chain off as it was so warped I couldn't get the chain guard on, and with the guard in place no one will see the chain anyway. I'm having a bit of a chill out now, before I battle with this kit again. I am determined to win though, I will take no injured in this battle its win or die.
Title: Re: Heller Kwak z1
Post by: Weaver on June 21, 2015, 10:00:59 AM
Chin up, it's going to look damned good when it's done: like something out of a '70s custom show. Think I still have a run of the Roadbike partwork from 1980-ish showing you how to do all those classic custom paint effects like marbling, crackle, lace-mask, flip-flop etc...
Title: Re: Heller Kwak z1
Post by: kpnuts on June 22, 2015, 12:54:12 AM
Hi all here is the battles progress so far
(http://i.imgur.com/AUjqZEi.jpg)

(http://i.imgur.com/1m2fLtl.jpg)

(http://i.imgur.com/VnRJMA1.jpg)

(http://i.imgur.com/kwQPTAj.jpg)

(http://i.imgur.com/0AVTNUw.jpg)

(http://i.imgur.com/iiDufTf.jpg)

(http://i.imgur.com/07YEbG8.jpg)

(http://i.imgur.com/AoSS8bI.jpg)

(http://i.imgur.com/o57o8yC.jpg)

(http://i.imgur.com/vylFV2Y.jpg)

(http://i.imgur.com/pLKdXiJ.jpg)

(http://i.imgur.com/VSz5KdQ.jpg)
Title: Re: Heller Kwak z1
Post by: kpnuts on June 23, 2015, 03:01:52 AM
Hi all nearing the end I think the kit has given in. dare I say i'm winning.
(http://i.imgur.com/Fkgiw8r.jpg)

(http://i.imgur.com/jF07e8g.jpg)

(http://i.imgur.com/rcgmZdi.jpg)

(http://i.imgur.com/sne1SJ9.jpg)

(http://i.imgur.com/LHMCYz7.jpg)

(http://i.imgur.com/nf1ZZiv.jpg)

(http://i.imgur.com/2RwIDdJ.jpg)

(http://i.imgur.com/pjbNxNY.jpg)

(http://i.imgur.com/VhT3xG3.jpg)

(http://i.imgur.com/mSjHAiu.jpg)

(http://i.imgur.com/S8DjiCR.jpg)

(http://i.imgur.com/jSxz3bQ.jpg)

(http://i.imgur.com/1fzBM0N.jpg)

(http://i.imgur.com/YJ0DfrA.jpg)
Title: Re: Heller Kwak z1
Post by: Old Wombat on June 23, 2015, 06:26:45 PM
... dare I say i'm winning.

Not until it's safely tucked into its display cabinet ... &, even then, I'd be careful about it
Title: Re: Heller Kwak z1
Post by: kpnuts on June 24, 2015, 02:35:18 AM
Hi all well she's finished and no more incidents.
(http://i.imgur.com/K2JCAcR.jpg)

(http://i.imgur.com/aWAeqwN.jpg)

(http://i.imgur.com/ONrjHbZ.jpg)

(http://i.imgur.com/DfD5eXK.jpg)

(http://i.imgur.com/Ska6SnF.jpg)

(http://i.imgur.com/Wo5MsKs.jpg)

(http://i.imgur.com/YKiu6W1.jpg)

(http://i.imgur.com/rTIwK0x.jpg)

(http://i.imgur.com/3N49ZPT.jpg)
Title: Re: Heller Kwak z1
Post by: elmayerle on June 24, 2015, 02:52:10 AM
Beautiful!!