Author Topic: A-10 seaplane fighter  (Read 6409 times)

Offline Kerick

  • Newly Joined - Welcome me!
A-10 seaplane fighter
« on: April 08, 2020, 10:17:29 AM »
I recently started a kitbash on another forum for their "In The Navy" GB. I usually don't get into many group builds as I build so slowly I never finish in time. Now with this "shelter in place" stuff going on I might have a chance.

Just a few pics to show my progress so far.

Here's what the floats started out looking like.



I decided to lengthen the main float to better fit the A-10 fuselage. I used sprue to build a frame for the stretch.



I curled a piece of plastic sheet to wrap around the frame. Gaps filled with CA glue or plastic slivers.



Much PSR at the moment.



Next will be trying to build the box over the fuselage the wings will attach to and hold the main gear.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A-10 seaplane fighter
« Reply #1 on: April 08, 2020, 03:52:47 PM »
Fine pontoon stretch technique. :smiley:     With A-10 engines up out of way from water spray, its a natural for a float plane version.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #2 on: April 09, 2020, 02:27:13 AM »
Keen to see this one finished.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: A-10 seaplane fighter
« Reply #3 on: April 09, 2020, 04:07:59 AM »
Excellent idea!  Especially with the A-10 having the engine intakes masked by the wing so that spray ingestion is reduced. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline apophenia

  • Patterns? What patterns?
Re: A-10 seaplane fighter
« Reply #4 on: April 09, 2020, 04:10:41 AM »
Fine pontoon stretch technique...

I'll say! That looks amazing  :smiley:
Auferstanden aus Ruinen; Glück für Menschen und Maschinen ...

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #5 on: April 09, 2020, 11:29:55 AM »
Keen to see this one finished.

Me too!

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #6 on: April 10, 2020, 01:07:23 PM »
A little progress. The float is attached to the fuselage.



Now if my wife would go back to work I might have more progress! She's thinking up Honey do projects faster than I can get the materials for them!

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #7 on: April 11, 2020, 02:28:57 AM »
Looking good.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #8 on: April 11, 2020, 05:07:31 AM »
 :smiley:

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #9 on: April 12, 2020, 02:55:53 AM »
Puttied up the fuselage float joint. I glued in a strip of really thin polystyrene over the joint. I cut it from a clear cookie container. Once this is sorted out I’ll work on the wings. I think I’ll use the S-3 Viking horizontal stabs but it in a vee. I’ll have to check that as I go as it might be in the path of engine exhaust.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A-10 seaplane fighter
« Reply #10 on: April 12, 2020, 12:55:58 PM »
Liking pontoon-fuselage match.  :smiley:

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A-10 seaplane fighter
« Reply #11 on: April 12, 2020, 12:59:30 PM »
Puttied up the fuselage float joint. I glued in a strip of really thin polystyrene over the joint. I cut it from a clear cookie container. Once this is sorted out I’ll work on the wings. I think I’ll use the S-3 Viking horizontal stabs but it in a vee. I’ll have to check that as I go as it might be in the path of engine exhaust.
Probably need to set the angle of the vee so that they don't.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #12 on: April 13, 2020, 01:06:23 PM »
Well, here's a look at plan B. Its the S-3 tail parts in a new arrangement. I'm glad I'm not the engineer who would have to figure out how to do this for real!



It's tacked on for now so we'll see if I continue to like it or if I come up with another idea.



I might get out the saw again and shorten the whole thing a bit.

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #13 on: April 13, 2020, 03:48:34 PM »
 looking good ! :smiley:

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A-10 seaplane fighter
« Reply #14 on: April 13, 2020, 05:25:47 PM »
Best wishes sanding putty.  PSR.  I can relate.

Offline robunos

  • Can't afford the top wing of his biplanes...
Re: A-10 seaplane fighter
« Reply #15 on: April 13, 2020, 06:30:46 PM »
Martin Marlin, is that you ?   ;D
Looking good so far, don't think it needs shortening at all, sleek is good . . .   ;)


cheers,
Robin.
By the pricking of my thumbs, Something Whiff-y this way comes . . .

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #16 on: April 14, 2020, 08:12:44 AM »
Hmmmmm....
Putty on the model and retaping the drywall joints in the upstairs bedrooms. (Long story!)
PSR all around!

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #17 on: May 17, 2020, 02:16:10 PM »
Minor touch ups on the PSR on the fuselage. Nothing worth taking a pic of just now. Time to start working on the box that goes on the fuselage that supports the wing and holds the main gear. If I push on this I might finish by the end of the month.

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #18 on: May 17, 2020, 04:19:36 PM »
 :smiley:

Offline FAAMAN

  • 'bin building for years ....... and it feels it!
  • Always thought of himself as a 'straight' modeller
Re: A-10 seaplane fighter
« Reply #19 on: May 24, 2020, 07:57:58 AM »
This'll be good ;) ;) ;)
"Resistance is useless, prepare to be assembled!"

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #20 on: July 10, 2020, 02:22:44 PM »
Finally finished the PSR on the fuselage and attached the tail. I found a solution to the problem of what to do with the saddle across the A-10 fuselage that holds the wings. An old Ertl/AMT Skyhawk in 1/48th donated its wings to the effort. It had been sitting in a drawer for 20 years so time to make a move on it. Anyway, here are some pics.

Blue is the clipped Skyhawk upper wing. Much chopping was required between removing from the half finished model and what you see.





The underside. I boxed in some future wheel wells and then covered the hole thing with really thin polystyrene from a food package box.





I wrapped sandpaper around a piece of 1/2 inch copper pipe to sand a trough where the A-10 fuselage will fit. The Skyhawk parts got really thin and had to be glued back together. it will be much stronger when mounted on the A-10.





I added thick pieces of plastic to the outside edges so that I can round them off later.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #21 on: August 28, 2020, 12:00:46 PM »
Can't believe its been July 10th since the last post on this project! Lots of things been going on here so maybe it will calm down and I can get something in now and then. Anyway, I cut some wheel wells in the middle bay and am gluing up some gear legs from the A-10 kit main gear and the leftover main legs from the afore mentioned Skyhawk. Still not long enough so adding some blocks inside the wheel bay. raising the wing and adding a float makes for a tall fuselage. I'll post pics when there is more to see. I hope that is soon.

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #22 on: August 28, 2020, 02:46:17 PM »
welcome back  ;)

Offline LemonJello

  • MARPAT Master
  • Member number 100...WooHoo!!!
Re: A-10 seaplane fighter
« Reply #23 on: August 28, 2020, 08:51:24 PM »
Always good to see a project revived.  I have several sitting in boxes waiting on me...

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #24 on: September 02, 2020, 10:12:59 AM »
So now we have some legs!



A combination of A-10 legs, Skyhawk legs and some sprue.





Now I have to cut a hole for nose gear.



The whole saddle device worked very well. Attaching the wings should go well. More PSR around the saddle and a few touch ups.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A-10 seaplane fighter
« Reply #25 on: September 02, 2020, 02:51:28 PM »
Enjoy photos, keep going, nice work.  :smiley:

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A-10 seaplane fighter
« Reply #26 on: September 02, 2020, 06:19:07 PM »
 :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #27 on: September 03, 2020, 02:08:27 AM »
Looking good
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #28 on: September 03, 2020, 10:24:05 AM »
Thanks for the kind comments gents!
Now I'll have to seriously look into a paint scheme. Definitely darker than gull grey.

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: A-10 seaplane fighter
« Reply #29 on: September 03, 2020, 08:48:57 PM »
Famn nifty scale engimaneering!  :smiley:
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #30 on: September 17, 2020, 07:18:08 PM »
We have wings! Pics hopefully later today. I’m working on engine pylons next.
I've also cut a hole for the nose gear.
I have no idea what to do about a paint scheme or even time period. Could end up anything from post WW2 to the present. Any suggestions?

Here's a couple of pics.





At least the tail doesn't look so overly large now. Flaps were removed from the wings many years ago but will be used as intended.
« Last Edit: September 18, 2020, 09:05:50 AM by kerick »

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A-10 seaplane fighter
« Reply #31 on: September 18, 2020, 05:31:11 PM »
Nice! 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #32 on: September 19, 2020, 02:24:41 AM »
So many options re markings and schemes.  Were you thinking any particular nation?

One that leaps out would be USMC obviously, though perhaps for something different, someone like Indonesia?
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: A-10 seaplane fighter
« Reply #33 on: September 19, 2020, 03:36:42 AM »
The A-10 seaplane looks better than I imagined. You could have it as a companion to the Seamaster!

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #34 on: September 19, 2020, 11:23:39 AM »
US Marines might be a good idea. My idea behind the model was a conflict in the 80s or 90s descends into a South Pacific island hopping campaign. Kind of a repeat of the PBYs black cats attacking Japanese shipping during WW2. There was an interesting scheme on Marine Skyhawks that I’ll look into.

Offline apophenia

  • Patterns? What patterns?
Re: A-10 seaplane fighter
« Reply #35 on: September 19, 2020, 11:49:33 AM »
US Marines might be a good idea. My idea behind the model was a conflict in the 80s or 90s descends into a South Pacific island hopping campaign. Kind of a repeat of the PBYs black cats attacking Japanese shipping during WW2. There was an interesting scheme on Marine Skyhawks that I’ll look into.

Or flip that on its head? Japanese Maritime Self-Defense Force markings for anti-shipping ops during a 1990s clash with the PRC over the Senkaku Islands?
Auferstanden aus Ruinen; Glück für Menschen und Maschinen ...

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: A-10 seaplane fighter
« Reply #36 on: September 19, 2020, 05:02:16 PM »
That is looking good, you can hardly see the A10 in it anymore  :smiley: :smiley:

Mog
>^-.-^<
Mostly Harmless...............

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #37 on: September 19, 2020, 07:19:53 PM »
 :smiley:

I guess engines are not yet there
« Last Edit: September 19, 2020, 07:23:23 PM by ericr »

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #38 on: September 19, 2020, 08:58:01 PM »
JMSDF is a great idea. I’ll be making some engine pylons soon.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A-10 seaplane fighter
« Reply #39 on: September 20, 2020, 12:34:26 AM »
A-10 origins are barely evident.  Might be I see it only because know its there.  Looking unique  :smiley:

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #40 on: September 20, 2020, 08:30:24 AM »
Once I add the engines the A-10 look might come back a little.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #41 on: September 30, 2020, 12:04:25 PM »
Working with the fiddly bits right now. I’m going to place two or four Maverick missiles on top of the wings to keep them out of the spray. Need to find two more Maverick launch rails. Sidewinders and ECM pods out on the wing tips. Also some wing tip floats. Then landing gear doors all around.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #42 on: October 05, 2020, 03:37:00 AM »
And now we have engines!







The A-10 roots might be a little more apparent now. Big stuff is pretty much done so now on to all the little pieces!

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #43 on: October 05, 2020, 03:50:01 AM »
Who's your Daddy...?



 ;)
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline apophenia

  • Patterns? What patterns?
Re: A-10 seaplane fighter
« Reply #44 on: October 05, 2020, 09:36:42 AM »
This just gets better and better  :smiley:

Who's your Daddy...?

 ;D ;D
Auferstanden aus Ruinen; Glück für Menschen und Maschinen ...

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #45 on: October 05, 2020, 02:07:45 PM »
a striking look !


Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A-10 seaplane fighter
« Reply #46 on: October 05, 2020, 04:10:37 PM »
Nope, A-10 parentage isn't, actually, obvious at all. :smiley:

The more I see of her the more I like what I see! 8)


(Although I would have angled the engine pylons a bit; for personal aesthetic reasons which bear no relation to your build. ;))
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #47 on: October 06, 2020, 01:39:17 AM »
Are we going to see similar landing gear?



Click to expand.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #48 on: October 06, 2020, 11:59:22 AM »
It’ll be something like that. I’m using the A-10 gear as much as possible.
Trying to make wing tip floats out of 1/48th mini gun pods. I wasn’t using them for anything else.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #49 on: October 07, 2020, 03:22:54 AM »
Maybe just re-use but reverse the existing A-10 wing landing gear 'pods':

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #50 on: October 07, 2020, 03:58:31 AM »
Wish I had thought of that but I’m beyond that point now. I’ll have to cut doors for everything.
I wonder if I can get away with fuel tanks under the wings? Weapons will all be above the wings.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #51 on: October 09, 2020, 11:30:10 AM »
Located a spare Navy style AAR probe in another kit. This will look good. I added winglets to the wing tips for ECM pods and a Sidewinder or two. Working on the wing floats too. Nose gear doors will be made from the piece I cut out to open the gear bay. Main gear doors will have to be cut new from sheet plastic.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #52 on: October 24, 2020, 01:43:37 PM »
Here are some pics showing the latest progress.
The winglets were cut from the fuselage left over from another A-10 kit.









The wing floats are from 1/48th minigun pods, parts of the Skyhawk's tail and Aves epoxie putty.



I'm really going to have to choose a paint scheme soon!

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A-10 seaplane fighter
« Reply #53 on: October 24, 2020, 05:32:00 PM »
Winglets: Tricky! And they look very good! 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #54 on: November 18, 2020, 06:20:19 AM »
I’ve been agonizing over a paint scheme for this build and it finally came to me. How about a Russian/Soviet scheme with lots of red stars? Story could be its working with the eckronoplanes in the Black Sea and Caspian Sea areas. I have a MiG 21 decal sheet that should work well and an SU-22 that might provide some missiles. I’ll have to look into the actual colors used by the Soviet/Russian navy or just wing it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A-10 seaplane fighter
« Reply #55 on: November 19, 2020, 01:25:43 AM »
There might be some ideas for schemes here.  That said, the YAK-38 Blue/Green would look good:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #56 on: November 19, 2020, 08:00:31 AM »
The blue might be interesting but that green, I don’t know.....
Although, I see I will have to paint the wheels green.

Offline apophenia

  • Patterns? What patterns?
Re: A-10 seaplane fighter
« Reply #57 on: November 19, 2020, 10:57:48 AM »
...The winglets were cut from the fuselage left over from another A-10 kit...

Clever! And very effective  :smiley:
Auferstanden aus Ruinen; Glück für Menschen und Maschinen ...

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #58 on: May 14, 2021, 02:26:31 PM »
Well a little mojo has returned to this project! I attached some fiddly bits and cockpit stuff. I made an IRST for in front of the cockpit instead of the Pave Penny pod. I managed to loose the Maverick missile rails so I'm waiting for a new Hasegawa weapons set to arrive to steal some from. I'll post some pics when there is a little more to show.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #59 on: August 04, 2021, 10:33:36 AM »
Here's a couple of pics of the latest progress, such as it is.





I stole/liberated an air to air refueling probe from an F-5 kit that wasn't going to need it. I'm going to have to get serious about painting now.
Probably use a paint scheme similar to present day USMC Harriers with I believe gunship gray topside with a light gray underside.

« Last Edit: August 04, 2021, 10:35:51 AM by Kerick »

Offline apophenia

  • Patterns? What patterns?
Re: A-10 seaplane fighter
« Reply #60 on: August 04, 2021, 11:40:29 AM »
That came out really well  :smiley:

...Probably use a paint scheme similar to present day USMC Harriers ...

Although, somehow, this A-10 has taken on a serious Beriev vibe  ;D
Auferstanden aus Ruinen; Glück für Menschen und Maschinen ...

Offline ericr

  • He's like some sort of Dr Frankenstein of modelling...
  • Has something for red, yellow or blue...
Re: A-10 seaplane fighter
« Reply #61 on: August 04, 2021, 03:29:21 PM »
 :smiley:

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A-10 seaplane fighter
« Reply #62 on: August 04, 2021, 05:59:44 PM »
It's taking its own sweet time but I like how this beastie is coming along! :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: A-10 seaplane fighter
« Reply #63 on: August 08, 2021, 07:56:25 AM »
Still looking fantastic.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A-10 seaplane fighter
« Reply #64 on: August 09, 2021, 11:13:07 AM »
I ordered some USMC Harrier decals so that will nail down the paint scheme. Finally! So now I will just have to apply the paint!

Offline Gingie

  • The LAV sausage-maker…goes nice with a home made beer I understand
  • Has been to Tatooine...
Re: A-10 seaplane fighter
« Reply #65 on: August 10, 2021, 12:31:51 AM »
fantastic! I had my doubts when I read the thread title, but you've really stuck the landing on this one!