Beyond The Sprues
Current and Finished Projects => Physical Models => Aero-space => Topic started by: Brian da Basher on March 15, 2012, 04:19:05 AM
-
I picked up this old 1/72 Amiot 143 by Heller a while back on the cheap. I figured just as is it's pretty far out there and as a bonus has some nice big spats:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/helleramiot143box.jpg)
This kit (with some added parts) will eventually be two aircraft. Of course, I started with the first and easiest (yeah, right) project: cutting the wings to make a flying wing.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingprog_01.jpg)
I planned to omit the engine nacelles, but one seemed to make a nice 1/144 scale nose. I found a piece of pointy clear blisterpack that was a good fit:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingprog_06.jpg)
I liked the kit spats but in 1/144 they'd be around 11 feet tall, way too big. Fortunately, the spat stash came to the rescue:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingprog_02.jpg)
The twin tails are fins from a sub kit and the engines are twin-row radials from Aeroclub. I've got some four-bladed Aeroclub props for this project too.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingprog_04.jpg)
Off to add some paint and see where to do the PSR...
Brian da Basher
-
Love it :-* Although this looks like it might be a 5 spat job!
-
I like what I see, BdaB! This is a great way to make a French design look good. With the spats and fins it looks awesome. I'll have to follow this one closely.
-
Very very smart in looks and execution. Can't believe how well you made that blister pack fit. :P
-
Great start, Brian! Very curious as to the paint scheme you are considering for this one.
Reminds me a bit of this little bit of advert design from the period.
(http://davidszondy.com/future/bohn/flying_wing01.jpg)
-
Great build
-
I love the classic, epoch looks of your builds Bri. These ones should be wonderful
-
Looks like a winner, Brian! Any plans for the fuselage?
I liked the kit spats but in 1/144 they'd be around 11 feet tall
You say that like its a bad thing... ???
;)
-
as a bonus has some nice big spats
Admit it Brian - you bought it just because of those big, round spats...
-
Looks like a winner, Brian! Any plans for the fuselage?
I liked the kit spats but in 1/144 they'd be around 11 feet tall
You say that like its a bad thing... ???
;)
Look at the monster tires that were on the B-36 prototype!
(http://www.air-and-space.com/nara/342usaf21378%20030107%20XB-36%2042-13570%20main%20gear%20tire%20l.jpg)
-
as a bonus has some nice big spats
Admit it Brian - you bought it just because of those big, round spats...
[fake foreign accent]
Ahhh and such tenderly curved yet vivacious little minxes those spats are!
:-* :-* :-*
Sometimes one must go where their heart leads them, no?
[/fake foreign accent]
Last night I slapped on a primer coat of gesso:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingprimer_01.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingprimer_02.jpg)
While gesso's not an ideal primer, it's good for me because I have lots of it and it'll still give the regular paint something to grab onto.
Today I figured out the livery.
Are you guys hungry?
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/buffalowingstray.jpg)
Brian da Basher
-
neato !!!
-
Is it a Buffalo Wing airliner, flying out of... Buffalo?
-
Like the way this is taking shape. I see a Jules Vern influence. Uncommon as they are, all flying wings have an exotic-to-SyFy look to me.
Same for the "sorta flying wings" (for lack of better term) like Avro Vulcan and Arado 555.
Looking forward to more pictures. :)
Bill
-
Mmmm...buffalo wings... :P
-
While waiting for some paint to dry, I couldn't resist taking a couple of bench shots:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingdecals_01.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWingdecals_02.jpg)
Now on to the rest of the decals.
Brian da Basher
-
I love it Brian! Every passenger gets his/her own skylight, right? ;D
-
I wonder how wide the runway is ? lol
Love it !!
-
These are the builds that always amaze me. Its brilliantly simple. How did you do so much with so few pieces? :D
-
Wow! :icon_surprised: You certainly made something well worth looking at out of this Amiot design! :)
Looks like the original aircraft was an all-wooden design - constructed solely from wood of the ugly tree. >:D
-
Fantastico, Brian!!!
This is a very retro-futuristic plane.
Can you explain how do you draw/scribe/paint the cockpit windows for this example?
-
Looks like decals for the windows both cockpit and the passenger cabin, Rafael.
Just want to say that this is a super project, and gets better with each post. This machine simply looks like something out of those late 30's Popular Mech/ Popular Science magazines. Its got Art Deco, futurism and basic workable engineering going so well together.
Suggestion: you will be fitting props soon enough and there are two ways to treat that, either a small bullet hub -exposed pitch rings, basic cover or you could consider a aerodynamic spinner, a larger cover. I think the latter would add to the look you have created and are approaching. Also, a similar deco stripe like on the tails should go on that front landing gear spat, plus the other two.
-
Once again, there's something just so very "right" about this one, Brian. You definitely have another winner with this one: a real gem!
-
This bird would be awesome to see in the air with that white scheme. Very nice. :)
-
Having married into money in 1929, Jack Northrop was finally able to seriously pursue his dream of large, flying wing aircraft. After two years of work in great secrecy, the Northrop Flying Wing Transport (FWT) took to the air.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing004.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing003.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing002.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing001.jpg)
continued...
Brian da Basher
-
Northrop's revolutionary design paid bonuses in performance, but few airlines of the time were willing to gamble on such an unconvential aircraft. He was forced to launch his own airline in an attempt to prove the radical new design and so Flying Wing Airlines was born.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing006.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing007.jpg)
The first passenger flight took off with great fanfare:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/first_flight_with_wings.jpg)
Due to the Flying Wing Transport's unique flight characteristics, things could get tense in the cockpit:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/drinkforthepilots.jpg)
Jack Northrop's FWT appeared to be the new flying wonder of the age.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing005.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing009.jpg)
continued...
Brian da Basher
-
While the flight from Mt. Vernon, Ohio to Keokuk, Iowa was uneventful, everyone on board raved about the buffalo wings.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/western-union-theyve-got-wings.jpg)
Demand for those delicious wings forced Flying Wing Airlines to serve them on every flight.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/stewardesseswithwings.jpg)
The airline was a huge success.
Then the "Sacre Bleu!" bleu cheese blight hit hard and it became impossible to enjoy buffalo wings. Ranch dressing was tried as a substitute and deemed a dismal failure. This and the deepening depression caused Flying Wing Airlines to fold after only a short time in business.
While Flying Wing Airlines and the FWT were soon forgotten, Jack Northrop used the experience to refine his flying wing designs which led to development of the B-2 bomber.
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing012.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing011.jpg)
Brian da Basher
-
The model is painted in Model Masters Semi-Gloss White and the decals are mostly leftovers from a sheet of Eastern Airlines livery by ATP. A tip o' the pin to Russ C for suggesting stripes on the spats. It turns out I had just enough bits of decal left to dress those spats up a little.
Here's a couple of glamor shots:
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing010.jpg)
(http://i1099.photobucket.com/albums/g392/Bri2k/Flying%20Wing/FlyingWing008.jpg)
Brian da Basher
-
I have never wanted to fly on an aircraft so bad in my life. MMMMMM Flying Buffalo Wings....also look who's serving em :-* >:D
-
OUTSTANDING !!!!
(http://farm8.staticflickr.com/7015/6799503889_54a28d1d7b.jpg)
I'll second sotoolslinger and que up for tickets now.
-
Wonderful model! :-*
(and a million billion times more aesthetic than the Amiot source) :D
-
Otta be in a movie.
Sky Captian and the World of Tomorrow II or something
Great build - way cool. 8)
-
Looks far better than the villain's flying wing in those old Republic serials. I could see one of these painted in black serving instead.
-
"Due to the Flying Wing Transport's unique flight characteristics, things could get tense ... "
Ah, that's why the windows are in the roof! Could make for some interesting site-seeing flights ;D Excellent build and backstory Brian :)