Author Topic: wheels in space  (Read 6566 times)

Offline kengeorge

  • Newly Joined - Welcome me!
wheels in space
« on: January 07, 2017, 09:59:53 AM »
I'm hoping that somebody here has the brain's I don't have to answer my question,or at least point me in the right direction.
So here is the question, I want to know what is the minimum diameter of a rotating ring to impart either half or full earth gravity whilst in orbit, as I'm trying to design something like the circular space station in 2001 and need to know if Its too big, small or just right.

ken

Offline Kerick

  • Reportedly finished with a stripper...
Re: wheels in space
« Reply #1 on: January 07, 2017, 10:34:19 AM »
Depends on the angular velocity, ie, RPMs and radius.

https://en.wikipedia.org/wiki/Rotating_wheel_space_station

This gives a description of a 250 ft diameter ring at 3 rpms giving 1/3rd G.

Here is a calculator

http://www.calctool.org/CALC/phys/newtonian/centrifugal

100m radius at 3 rpm gives just over 1 G. Hope this helps.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: wheels in space
« Reply #2 on: January 07, 2017, 11:13:42 AM »
There's also SpinCalc which will tell you if the spin rate is outside of what most people will tolerate (with references!)


Offline kengeorge

  • Newly Joined - Welcome me!
Re: wheels in space
« Reply #3 on: January 07, 2017, 08:24:40 PM »
Thank you kerick & Frank3k for your help.
My idea is to have a rotating ring space station to provide low artifical gravity so astronauts heading to & from the moon can acclimatise to their enviroments.
Now I can get on & design it.   

Offline mrvr6

  • Accidentally created a Tejas….
Re: wheels in space
« Reply #4 on: January 08, 2017, 12:50:30 AM »
would it be possible to have a big ring and adjust the rpms to give different g? i dont see why not.
how would you counterbalance the ring? have weights on a track of sorts on the outer perimeter?

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: wheels in space
« Reply #5 on: January 08, 2017, 01:09:18 AM »
IMHO, I think it will be a very long time before you see anything like that. NASA wasted a very good opportunity to having something along those lines when they were launching Space Shuttles, the huge external tanks which were just expendable after the launch could have been designed to create a wheel station. There was 135 shuttle flights, that could have made a fair size space station.

Can't remember right now, but someone posted some pics of just that so I know it was considered. They just didn't implement it --  :-X

I also don't think just creating a centrifugal force is the right way to duplicate an earth like environment, you also need a magnetic field like the earth's  ---
« Last Edit: January 08, 2017, 01:24:12 AM by kitnut617 »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: wheels in space
« Reply #6 on: January 08, 2017, 04:32:26 AM »
IMHO, I think it will be a very long time before you see anything like that. NASA wasted a very good opportunity to having something along those lines when they were launching Space Shuttles, the huge external tanks which were just expendable after the launch could have been designed to create a wheel station. There was 135 shuttle flights, that could have made a fair size space station.

Can't remember right now, but someone posted some pics of just that so I know it was considered. They just didn't implement it --  :-X


Some options:



More details





More info:

http://www.astronautix.com/s/stsexternaltankstation.html
http://aeromaster.tripod.com/grp.htm
« Last Edit: January 08, 2017, 04:36:14 AM by GTX_Admin »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: wheels in space
« Reply #7 on: January 08, 2017, 09:11:41 AM »
I also don't think just creating a centrifugal force is the right way to duplicate an earth like environment, you also need a magnetic field like the earth's  ---

If you have to produce 1g (or 1/3g or 1/6g) there are three ways: spin the sucker, add mass or sprinkle some skiffy pixie dust and cast a magic gravity spell, like they do in almost all SF shows and movies.

At my previous job, my boss studied the inner ear and how it affected balance. We had chairs and swings that could move/rotate people at very high accelerations to see how large angular accelerations affected the inner ear and the eyes.
I asked him a  few times about rotating spacecraft and he didn't think it would be difficult to adapt except at the extremes of small size/high g.

For magnetic fields, that's also not a show stopper. Run a current through coils (which could function as a means of propulsion if designed right) add some polyethylene and water shielding and that should greatly reduce the effects of charged particles and most cosmic rays.

If we hadn't wasted 30 years on the Shuttle/ISS we might have had a space wheel by now.

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: wheels in space
« Reply #8 on: January 08, 2017, 08:06:16 PM »
The problem with all the re-usable tank schemes was that a tank isn't a habitat, and it takes a lot of work and equipment to make it into one. That equipment has to get up there somehow, which means either more shuttle flights or putting it in the tank (in compacted form) on the ground to start with.

What you really need is a pre-equipped (on the ground) habitat/tank which can convert empty fuel volume into pressurised habitation volume once it's in orbit. Astronauts can then unpack and build the interior in shirt-sleeve conditions, which is vastly easier than trying to do it in space suits. This seems feasible, if an 'interesting' design problem (sliding internal tank bulkheads?), however Bigelow's inflatable habitats may have effectively stolen it's lunch.
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: wheels in space
« Reply #9 on: January 08, 2017, 11:18:25 PM »
One of the links Greg attached to his post says more or less the same thing Harold  ---- which is what I said in my first post, the tanks could have been designed from the get-go for use as a wheel station.

I think until the solution to create artificial gravity is found, humans just aren't going anywhere in space --- floating around just handicaps everyone

« Last Edit: January 08, 2017, 11:21:20 PM by kitnut617 »

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: wheels in space
« Reply #10 on: January 09, 2017, 06:14:21 AM »
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: wheels in space
« Reply #11 on: January 09, 2017, 10:21:41 AM »
Furnishing the insides of these now empty fuel tanks sounds like the perfect opportunity for Ikea to develop their own special line of flat-pack furniture that can be assembled in a zero-g or near zero-g environments.  :) 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: wheels in space
« Reply #12 on: January 09, 2017, 10:26:07 AM »
Furnishing the insides of these now empty fuel tanks sounds like the perfect opportunity for Ikea to develop their own special line of flat-pack furniture that can be assembled in a zero-g or near zero-g environments.  :)

"This bookcase must NOT be fastened to the walls using nails or woodscrews"  :o
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: wheels in space
« Reply #13 on: January 09, 2017, 10:55:14 AM »
Furnishing the insides of these now empty fuel tanks sounds like the perfect opportunity for Ikea to develop their own special line of flat-pack furniture that can be assembled in a zero-g or near zero-g environments.  :)

"This bookcase must NOT be fastened to the walls using nails or woodscrews"  :o
Of course not, that's what double-sided sticky tape is for; though suitably sticky strips of Velcro, applied to wall and bookcase, will also work.