Author Topic: Simon's Cat(alina)  (Read 12174 times)

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Simon's Cat(alina)
« on: June 09, 2019, 08:46:30 PM »


Hi all

Just a place marker for the moment.

As you can guess this will feature a PBY Catalina (very floaty) but as it will require a unique paint scheme that I (sorta) have in my head it will be crucial that I get to grips with manufacturing my own decals if this is going to be a goer. I will be using the Fairey Gannett in the Beasts of Burden GB as a prototype.

Of course if everything goes mammaries up, I can always do an OOB build but that won't be quite so much fun so I need to finish the Gannett before I start this one.

More when it happens (eventually)...................


Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #1 on: June 09, 2019, 10:28:29 PM »
 :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #2 on: July 15, 2019, 07:33:34 PM »
Ok Chaps finally got to start this one.

After the success of producing decals for the Waterbombing Gannet this ones a goer :smiley:

Here is the base kit, The 1987 Boxing of the Airfix Catalina.

by Robomog, on Flickr

Its quite old and the plastic feels waxy and brittle. There is a bit of flash and a fair few sink holes and ejector marks also some of the larger parts appear warped  but this is not suprising the mould is dated 1964 ! (and more amazingly it looks this kit was still in production in 2008 !)

I'm going to convert this aircraft into a fictional civilian air tour Catalina so i have purchased some aftermarket transparencies, the intention being that the civilian conversion included replacing the existing canopies with "frame less" plastic equivalents for better sight seeing. However the vac-form canopies are of very high quality and  include the framing faintly etched in as a guide, so i have shot myself in the foot slightly. However i will explain this away as clear plastic reinforcement to make the canopies/blisters more robust.  ::)

I have not quite decided what to do with the front turret, it will either be a fighter type canopy faired into the fuselage or the Vac-form replacement turret canopy used front to back to give a clear lookout.   

As you can see below construction has started, fit is not brilliant but considering the age of the kit not unsurprising, the only other really old kit in my stash at the moment is a Rotodyne and i imagine the fit on that will be iffy as well, cant decide what to do with that kit yet as all the ideas i have had for it have already been done. You can see the frame detail in the vac-form canopies.

by Robomog, on Flickr


The interior detail of this kit is pretty spartan and I rarely super detail cockpits at this scale because you generally can't see much once the canopy is on, but as I am replacing the existing glass with new and very clear aftermarket parts I will have to make the effort.

Below I have started the process, my bulkhead skills have improved somewhat. I will be putting some detail into the rear compartment, the cockpit and the forward gun turret.

by Robomog, on Flickr



More as it happens............

Thanks for looking.


Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #3 on: July 15, 2019, 11:28:53 PM »
 :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Simon's Cat(alina)
« Reply #4 on: July 16, 2019, 02:36:04 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: Simon's Cat(alina)
« Reply #5 on: July 16, 2019, 04:03:05 AM »
Okay, now I've got a Catalina/Rotodyne mash-up stuck in my head!
Froglord: "... amphibious doom descends ... approach the alter and swear your allegiance to the swamp."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #6 on: July 16, 2019, 02:36:12 PM »
Thanks guys

GTX :-  Hmmmmm interesting article. Food for thought

Apophenia:- Halt, desist, whoa, stop ! that line of thought could cause injuries, including me ( thinks: a Catalina with a big rotor on top ? ........... aaaaaah !)


Mog
>^-.-^<
Mostly Harmless...............

Offline jcf

  • Global Moderator
  • Turn that Gila-copter down!
Re: Simon's Cat(alina)
« Reply #7 on: July 17, 2019, 06:02:28 AM »
Okay, now I've got a Catalina/Rotodyne mash-up stuck in my head!


How about a Shagbat giro to go with?  ;D

“Conspiracy theory’s got to be simple.
Sense doesn’t come into it. People are
more scared of how complicated shit
actually is than they ever are about
whatever’s supposed to be behind the
conspiracy.”
-The Peripheral, William Gibson 2014

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #8 on: July 17, 2019, 02:28:38 PM »
That's doable, a Supermarine Walrus would make an ideal donor kit.

Nice spot  :smiley:

Mog
>^-.-^<
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #9 on: July 18, 2019, 06:50:19 AM »
I've got one of these in the pile I might get to in time with luck, so I'll be watching with interest where you take this one, Mog.

Your builds are always a treat to watch!

Brian da Basher

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #10 on: July 21, 2019, 03:53:29 PM »
Thanks Brian,

Be warned fit is not good, if the Cat had dihedral on its outer wings they would be a good fit, same if the floats were angled up. I am going to have to glue the floats in the up position as there are massive gaps around the pylons.

Fuselage actually fits ok but there is a pronounced ridge at the edges (probably due to the age of the mould) that has to go.

Also has rivet rash even for a non rivet counter, but looking closely the Cat is a bit knobbly so I will just reduce them a somewhat. Also the wing behind the centre spar is canvas covered, so all the rivets going to have to go from there.

I feel some unwanted PSR sessions coming on.

Minor update soon...........

Mog
>^-.-^<
« Last Edit: July 22, 2019, 10:17:00 PM by Robomog »
Mostly Harmless...............

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #11 on: July 22, 2019, 06:31:54 PM »
Hi All,  Minor update

I started work on rivet removal on the wings but got bored and moved to constructing some basic internal detail so the completed fuselage will not look quite so empty.

The bulkheads, seats and central walkway for the rear compartment are complete and I have started on the cockpit and bow compartment. Things are not quite adding up here location wise so i am going to have to wing it somewhat. Needless to say it may not be very accurate but will look good enough once the canopies are on.

by Robomog, on Flickr


Later in the evening Claude the cat stopped play.

by Robomog, on Flickr


More when it happens........

Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #12 on: July 22, 2019, 09:50:21 PM »
 :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #13 on: July 31, 2019, 06:45:07 PM »
Hi all

Progress is slow but this has happened before, i'm getting carried away  with the internal detail.

The rear compartment is done and the cockpit is coming along nicely. Once all this is complete the rest should come together relatively quickly (famous last words  ::))

by Robomog, on Flickr

by Robomog, on Flickr

Iv'e constructed a seat on a pylon for the forward cockpit but it got cut off in the pic.

I have successfully de-riveted the trailing edges and reduced the rivet detail on the wings and fuselage so the construction of the wings can commence, fit is not good so much PSR envisaged.

more when it happens...…

thanks for looking.

Mog
>^-.-^<
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #14 on: August 01, 2019, 06:56:13 AM »
Those are some amazing details, Mog!

I can only marvel at the infinite patience you must have to be able to do such incredible work!

Thanks for a great update!

Brian da Basher

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #15 on: August 03, 2019, 08:40:07 AM »
Hi all

Had an unprecedented night modeling, all the internal details are complete and ready to install,  most of the night was taken up installing the nose weights.

The Airfix Catalina was designed to sit on an access ladder and not have any nose weight. This is understandable but I wanted to ditch the ladder so that it didn't  spoil the graceful lines of the Cat. As a result I've set myself up for a bit of pain, because as you know the Cat has a huge long tail and the main undercarriage is set  quite forward.

by Robomog, on Flickr

The packet on the right is a mixed batch of lead fishing weights and steel  bearings that I have estimated will keep the nose wheel on the ground. To get as much weight as forward as possible I am going to stick some of these under the cockpit floor.

The remainder of the weights I have stuck with superglue in two plastic boxes behind the rear cockpit bulkhead

by Robomog, on Flickr

Whilst all that was drying I have assembled the wings.

by Robomog, on Flickr

Although the fit was a little loose these went together suprisingly well, there will be a minimal amount of filler, I had more trouble fitting the wing tip floats.

I probably  could have closed up the fuselage but decided to step away for 12 hours to give the superglue a chance to gas out, somebody recent ly had their cockpit glass frosted and ruined by the superglue fumes (but made an excellent recovery incidentally) so I wasn't going to take any chances.

That's the progress so far, hopefully I should get the fuselage together in the next session......

Thanks for looking....

Mog
>^-.-^<
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #16 on: August 03, 2019, 09:02:03 AM »
Now that looks like some very serious modeling indeed, Mog!

I'm terrible about remembering things like nose weights (my schnozz is heavy enough, thank you) so I tip my hat to your efforts.

Very wise waiting for the glue to out-gas. I never regret taking the extra time and wish I did more often.

Anticipating the next update,

Brian da Basher

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #17 on: August 07, 2019, 04:48:45 AM »
Thanks Brian, 

all systems stopped at the moment workplace has changed location and timings so getting nothing done during the week (don't you just hate it when the real world gets in the way !), roll on the weekend.

Mog
>^-.-^<
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #18 on: August 08, 2019, 05:38:19 AM »
Thanks Brian, 

all systems stopped at the moment workplace has changed location and timings so getting nothing done during the week (don't you just hate it when the real world gets in the way !), roll on the weekend.

Mog
>^-.-^<

Ugh I know what you mean, Mog. I once came this close to sending my boss a very sternly worded e-mail informing him that he was seriously infringing on my bench time.

Hope to see you back at it when things calm down.

Brian da Basher

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #19 on: August 14, 2019, 06:12:49 PM »
Made some serious progress over the weekend,  the baulkheads have been installed and the fuselage closed up.

by Robomog, on Flickr

by Robomog, on Flickr


The fit of the fuselage parts is appalling, this kit is really showing its age  (new tool Airfix ?  hint hint), it wasn't  helped when I realised the nose undercarriage leg had dropped out when I was assembling and had to pull it apart again, also the control panel was way too big and clashed with the new floor,. Having pulled it out I tried to cut it to a better size but it was brittle and shattered. In the end I fashioned a new part from plastic card and placed it position through the front gun turret opening, very fiddly. I decorated it later in situ when the glue had dried.

That done I found I had missed one of the transparencies at the back, the lower gun position in the tail. Normally I could have installed this through the holes where the side gun turrets were but now there was a detailed bulkhead in the way. I had no choice but to split the rear fuselage and glue it into position as best I could. It's currently a little awry but I am gradually building up layers of Clearfix to level it off.

by Robomog, on Flickr

I tend to favour masking tape to hold bits together and use clips where extra pressure is needed, but this plane is so curvy most of the clips pinged off.


by Robomog, on Flickr

by Robomog, on Flickr

You can see here how bad the fit was by the amount of filler required. The pylon had a distinct step which I have levelled out with some thin plastic card.

More when it happens

Thanks for looking...............

Mog
>^-.-^<

Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #20 on: August 14, 2019, 07:29:04 PM »
Looks like this is being one of those builds! :o


Good to see you persevering! :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #21 on: August 15, 2019, 12:56:17 AM »
Thanks OW,

When I finish this one it will be far from perfect (even by my shaky standards),  but I am determined to make it look good   ;)  ???

Mog
>^-.-^<
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #22 on: August 15, 2019, 07:22:12 AM »
Sounds like a mighty save to me and kudos for being so quick-thinking, Mog!

I like your approach to the interior too.

Thanks for the update and sharing your eventful weekend at the bench with us.

Brian da Basher

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #23 on: August 15, 2019, 07:56:55 PM »
Thanks Brian,

Most of the major PSR is done now, the engines, rudder and tail planes are now in place and after a little filling and tarting up on those it's off to the spray booth.

Must start working on the decals too.

More soon...........

Mog
>^-.-^<
Mostly Harmless...............

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #24 on: August 15, 2019, 08:09:08 PM »
Incidentally, I would like to give a shout out to this chap

http://www.ipmsdeutschland.de/Flugzeuge/Gaeste/Wolf_Catalina.html

The amount of detail he put into his model is amazing, way above what I could achieve, but nevertheless was really useful when I was detailing my Catalina.

Mog
>^-.-^<
Mostly Harmless...............

Offline tankmodeler

  • Wisely picking parts of the real universe 2 ignore
Re: Simon's Cat(alina)
« Reply #25 on: August 15, 2019, 11:54:36 PM »
Be careful with the landing gear now that you have a substantial amount of weight in the fuselage. It's quite likely that it will droop and/or split with time given the brittle plastic of the kit and the fairly humongous amount of weight you have in the old girl.

You may still need a support, but now under the main hull to support the weights.

Just a head's up.

Paul

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #26 on: August 16, 2019, 01:58:53 AM »
Yea, good point tankmodeler, the main undercarriage  legs are very spindly  and the baulk of the weight is quite far back.

In retrospect maybe I should have faired over the front turret, then I could stuff all the weight right at the front.  :-\

May need a piece of clear sprue between the wheels  just to bolster it up.  Or I could lash out on some white metal afterparts but they are expensive ::)

Time will tell.........

Thanks for the heads up

Mog
>^-.-^<
Mostly Harmless...............

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
« Last Edit: August 16, 2019, 03:53:57 AM by kitnut617 »

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #28 on: August 16, 2019, 04:38:24 AM »
Thanks kitnut, will definitely keep it in mind if the kit undercarriage cant take it !

Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #29 on: August 16, 2019, 08:07:45 AM »
Bloody Hell! Mr Wolf put in some flipping effort, didn't he! :icon_surprised: :icon_surprised: :icon_alabanza: :icon_alabanza:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #30 on: August 16, 2019, 09:41:40 AM »
Bloody Hell! Mr Wolf put in some flipping effort, didn't he! :icon_surprised: :icon_surprised: :icon_alabanza: :icon_alabanza:

My point exactly,. The bigger scales give much more scope for detailing but that was above and beyond in my opinion and it's all scratch no afterparts at all, I am in awe. :icon_alabanza: :icon_alabanza: :smiley: :-* :-*

Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #31 on: August 16, 2019, 11:48:15 AM »
Bloody Hell! Mr Wolf put in some flipping effort, didn't he! :icon_surprised: :icon_surprised: :icon_alabanza: :icon_alabanza:

My point exactly,. The bigger scales give much more scope for detailing but that was above and beyond in my opinion and it's all scratch no afterparts at all, I am in awe. :icon_alabanza: :icon_alabanza: :smiley: :-* :-*

Mog
>^-.-^<

As long as he's happy (& doesn't flame anyone who puts in less effort), that's what matters! I, too, am in awe.
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #32 on: September 07, 2019, 03:34:00 PM »
Hi all

Just a small update, the deadline approaches and I'm not sure  if I will finish in time.

The bulk of the painting is done and the decals are ready, but there us still a lot of fiddelies to do like transparencies and the under carriage. The only saving grace with this one is I don't have to put the wings on till almost the very last.

Here's a sneaky peek of progress so far

by Robomog, on Flickr

More when it  happens

Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #33 on: September 07, 2019, 05:49:52 PM »
It's looking very good! 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #34 on: September 09, 2019, 02:04:13 AM »
"Small update" must be the understatement of the year, Mog!

Those colors are excellent, especially for a sea plane. In that combination, they've got an almost hypnotic quality.

It's great to see this one coming along and you've already got me looking forward to your next post.

Brian da Basher


Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #35 on: September 09, 2019, 05:56:14 AM »
Thanks guys,

On the home stretch now, the decals are on and  need a couple of coats of Alt Klear to seal them in. Transparencies next, then final assembly, also probably need another four coats of b!©©Dy dayglo orange on the floats to get rid of the streaks !

Will also find out if the kit undercarriage will take the nose weight - scary

Next post will be the finished model

Thanks for looking.......

Mog
>^-.-^<
Mostly Harmless...............

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #36 on: September 09, 2019, 09:11:05 AM »
Good luck, 'Mog! Hope you get her finished in time. :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #37 on: September 14, 2019, 09:23:10 PM »
Hi all

Well, finished at last, I have never gone this close to a deadline before, I think its the knock on effect of the overlapping group builds not that I'm complaining its just that the first three were those that I suggested/subscribed to and each has had a knock on effect on the next.

So despite being so close to finishing this kit still threw me some curved balls, starting with the transparencies. The replacement canopies I purchased were intended for the Academy kit which I can only surmise is a more accurate kit than the old Airfix one I have here as the only piece that would fit was the front turret, the two rear gun pods needed some serious surgery to fit and the man canopy was so far out that I had to use the original kit canopy.

And then I had the good news/bad news situation.

Good news :- the kit undercarriage took the weight of all the steel and lead  I had stuffed in the nose.

Bad News:- It wasn't Enough !  The model flopped gracefully back on its tail  aaaaargh!

A quick rebalancing showed I needed to add another 15 grams, But Where ?

Biting the bullet I stuffed 10 grams into the front wheel well, its plainly viable if you look but I've disguised it a bit with some grey paint. To get the remaining weights into the aircraft I removed the front turret and packed the remaining  5 grams in around the front viewing seat then chucked in another 2 grams for safety.

Et Viola it sits prettily on all three wheels.

And onto the photos, it was a nice day here so I decided to photograph the Catalina outside, however I think it my have caused a bit to much dazzle from the white surfaces. If time permits I will try some Studio shots as well.

by Robomog, on Flickr

by Robomog, on Flickr

Most of the Simons Cat graphics were found on the interwebs except the surfing Simons Cat.  This one I had to search for in some Simons Cat Cartoon books I had to find one with the right pose, this was then scanned and loaded into Serif DrawPlus. From here I could trace around the original to convert it to vector format which would allow me to edit the object to create a better pose and make life easier when creating the surfboard. I'm quite pleased with the results.

I have deliberately put him low on the hull so that while the aircraft is taxiing it looks like he is surfing the waves.

by Robomog, on Flickr

by Robomog, on Flickr

by Robomog, on Flickr

I included Simons Cat in a Hat as it had a holiday feel to it, you can also see why I got a bit paranoid about internal detail, those canopies are Very clear......

by Robomog, on Flickr

by Robomog, on Flickr

A very tentative nod to the Flying Tigers on the tail...…..

by Robomog, on Flickr

and I really couldn't resist the cats paw walkway markings.....

by Robomog, on Flickr

by Robomog, on Flickr

and lastly an underneath shot, you can clearly see the weights jemmied into the front wheel bay.

All the serial numbers are bogus.

In retrospect I should have faired over the nose turret so that I could stuff all the nose weights right at the front, ah the beauties of 20:20 hindsight

A big shout out to Mrs Lady Mog on this one who gave me as much time as I needed to finish on time, and to Simon Tofield for inventing Simons Cat, I hope he doesn't mind me high jacking some of his artwork.

And to everyone else all Comments and criticisms  gratefully accepted

Thanks for looking

Mog
>^-.-^<

« Last Edit: September 16, 2019, 01:16:37 AM by Robomog »
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Simon's Cat(alina)
« Reply #38 on: September 14, 2019, 10:11:10 PM »
Wow you made some incredible saves and came up with an incredible Cat, Mog!

The "cat walks"  and custom decals are the cherry on top!

I don't know how you do it, but you seem to top yourself with each new build.

Amazing and most delightful!

Brian da Basher

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Simon's Cat(alina)
« Reply #39 on: September 15, 2019, 12:45:33 AM »
Beautiful!!  I absolutely love those markings and the walkways are inspired!

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Simon's Cat(alina)
« Reply #40 on: September 15, 2019, 02:14:54 AM »
Outstanding work. :smiley:
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: Simon's Cat(alina)
« Reply #41 on: September 15, 2019, 09:00:47 AM »
Great looking plane! You should send Simon a picture of this build!

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Simon's Cat(alina)
« Reply #42 on: September 15, 2019, 05:56:04 PM »
Put yourself and skills into build big time.  More detail, more life than Airfix could foresee.  One cool Catalina  8)

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • Moderator
  • "Define 'interesting'?"
Re: Simon's Cat(alina)
« Reply #43 on: September 15, 2019, 09:36:42 PM »
 :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #44 on: September 15, 2019, 10:42:37 PM »
Thanks for the kind comments guys, much appreciated.


Frank3k - I might just do that for a giggle

Finsrin -  Mrs Lady Mog has often accused me of being "unnaturally happy"  perhaps its beginning to rub off on my kit building !

I had a lot of fun on this build and it came out better than I had envisaged so all your positive feedback is the cherry on the cake, I will probably take a backseat on the group builds for a while as I have burnt out a bit and I have some pressing real world problems to sort out.

But rest assured I will be back ...........

Thanks again

Mog
>^-.-^<
Mostly Harmless...............

Offline Dr. YoKai

  • Was in High School when mastadons roamed the plains...
  • A notorious curmudgeon who is partial to...hemp!
Re: Simon's Cat(alina)
« Reply #45 on: September 16, 2019, 01:24:43 AM »
 You will be missed - but I hope everything sorts itself out as well as this beautiful build did!
 I've liked the Simon's Cat series ever since I first saw it, and this is a wonderful take. ( To say nothing of
 a wonderful pun. )

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: Simon's Cat(alina)
« Reply #46 on: September 16, 2019, 05:28:53 AM »
That is very kind Dr Yokai thank you. I'm sure I won't be away Long, just recharging the mental batteries.

Mog
>^-.-^<
Mostly Harmless...............