Beyond The Sprues

General Category => Market Place => Kits for Sale/Swap => Topic started by: Story on August 03, 2016, 01:45:05 AM

Title: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on August 03, 2016, 01:45:05 AM
From the top of the pile, clearing out old kits due to changing priorities.

This is one of Verlinden's late-1990's 'hull is a solid brick of resin' kits with PE, includes an extra turret (40mm / .50 cal). Yes, they offered that option (see spec sheet here http://i.imgur.com/riyo0dg.jpg (http://i.imgur.com/riyo0dg.jpg))

For those unfamiliar with the vehicle, it's a derivative of the Cadillac Gage used in Vietnam and if I recall correctly, saw use by the Saudi Arabian National Guard in the 1st Gulf War.  Probably seen more action on Hollywood's big and little screens.

$30 CONUS plus whatever shipping works. Will happily trade for 35th scale Italian stuff or what do you have by way of junk?

(http://i.imgur.com/PiFGL6j.jpg)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Kerick on August 03, 2016, 01:54:38 AM
I swear I saw some driving around Camp Victory in Iraq in 2003. US Army MPs I believe.
They had the tuna boat turret.
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on August 03, 2016, 03:23:17 AM
Was just west of BIAP/Sather in 2008-2009.

Maybe you saw the M1117 ASV? That's a derivative. https://en.wikipedia.org/wiki/M1117_Armored_Security_Vehicle
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Jeffry Fontaine on August 03, 2016, 05:19:11 AM
I have that same model in protective custody.  It is an excellent paperweight :)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Old Wombat on August 03, 2016, 09:35:14 AM
I swear I saw some driving around Camp Victory in Iraq in 2003. US Army MPs I believe.
They had the tuna boat turret.

It was probably a M1117, a development of the V-100/LAV-150 family, which were issued to US Army MP units.

(https://upload.wikimedia.org/wikipedia/commons/6/6b/M1117_Armored_Security_Vehicle.jpg)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on August 03, 2016, 09:14:39 PM
It is an excellent paperweight :)

It's a brick of a kit.
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Kerick on August 04, 2016, 11:21:51 AM
I swear I saw some driving around Camp Victory in Iraq in 2003. US Army MPs I believe.
They had the tuna boat turret.

It was probably a M1117, a development of the V-100/LAV-150 family, which were issued to US Army MP units.

(https://upload.wikimedia.org/wikipedia/commons/6/6b/M1117_Armored_Security_Vehicle.jpg)

Ah yes, that's the critter! Thanks for the correction.
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on August 05, 2016, 12:43:12 PM


Ah yes, that's the critter! Thanks for the correction.


You didn't see this? http://beyondthesprues.com/Forum/Smileys/clabIcons/grin.gif (http://beyondthesprues.com/Forum/Smileys/clabIcons/grin.gif)

Was just west of BIAP/Sather in 2008-2009.

Maybe you saw the M1117 ASV? That's a derivative. [url]https://en.wikipedia.org/wiki/M1117_Armored_Security_Vehicle[/url] ([url]https://en.wikipedia.org/wiki/M1117_Armored_Security_Vehicle[/url])
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on February 23, 2024, 02:43:36 AM
(https://assets.isu.pub/document-structure/210917032058-93d5a332460b788424ce8b7b6f9ea30e/v1/c534b56d20ad7e394672fb401ece0aac.jpeg)

A Saudi Arabian National Guard vehicle in Yemen could have potential.
(https://i.pinimg.com/564x/2c/35/95/2c3595a0cbc9d87639f362680844f677.jpg)(https://i.pinimg.com/564x/9a/55/c1/9a55c1e8b8acbd318534a5b623a7f379.jpg)
(https://i.pinimg.com/564x/30/04/a3/3004a391e33e1892b4b8dd7bf092d8d5.jpg)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: raafif on February 23, 2024, 06:10:55 AM
I built Verlinden's V-100 - good kit with only 1 air-bubble underneath :smiley:
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on February 25, 2024, 11:48:35 PM
Someone's Thai Army build

(https://i.pinimg.com/564x/7b/bd/7e/7bbd7e664970999596481e5f619ec9d3.jpg)


(https://i.pinimg.com/564x/66/cb/13/66cb134200437d3546ff402539cbfa7b.jpg)

And since Haiti is in the news again
(https://i.pinimg.com/564x/3a/66/62/3a666269159c95115c3f46c9f5c282ad.jpg)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on March 11, 2024, 08:53:01 PM
(https://i.pinimg.com/564x/a8/d8/e2/a8d8e2e5d949418306ebcd3799bf9ab1.jpg)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: GTX_Admin on March 12, 2024, 02:44:44 AM
What are the details of that latest one?
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Story on March 12, 2024, 06:44:21 PM
I do NOT know! even after various types of reverse image searches, but with those two hatches it looks like a low-profile turret in the 105mm range - doesn't it?  Also, the driver's station exterior seems updated. That open tool rack screams 1950s/60s/yardsale vintage.
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Old Wombat on March 12, 2024, 09:04:22 PM
It looks like it's supposed to be some kind of MGS but, with the engine taking up half the rear space of the turret, there's no room for an auto-loader or magazine, Also, the tool rack, & whatever that is behind it, cover what should be an engine acces hatch. Plus, what's with the flared guards? As the previous images show, not part of the base design & not needed, unless you want it to look cool.

So, I'm wondering if it's a movie prop, possibly from SE Asia, where V-100s/LAV-150s are/were more common - not that I can find anything that suggests this might be the case.
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Old Wombat on March 12, 2024, 09:04:39 PM
Here's a cool variant (Phillipines Army "Simba"):

(https://upload.wikimedia.org/wikipedia/commons/thumb/d/df/A_GKN_Simba_of_the_Philippine_Army%2C_8_December_2013.jpg/800px-A_GKN_Simba_of_the_Philippine_Army%2C_8_December_2013.jpg)
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: GTX_Admin on March 13, 2024, 02:14:29 AM
I do NOT know! even after various types of reverse image searches, but with those two hatches it looks like a low-profile turret in the 105mm range - doesn't it?  Also, the driver's station exterior seems updated. That open tool rack screams 1950s/60s/yardsale vintage.

I was thinking perhaps 90mm gun
Title: Re: WTS/WTT Verlinden 1:35th scale V-150 armored car with extra turret
Post by: Rickshaw on March 14, 2024, 03:31:55 PM
Here's a cool variant (Phillipines Army "Simba"):

(https://upload.wikimedia.org/wikipedia/commons/thumb/d/df/A_GKN_Simba_of_the_Philippine_Army%2C_8_December_2013.jpg/800px-A_GKN_Simba_of_the_Philippine_Army%2C_8_December_2013.jpg)

The Simba is not a Cadillac-Gage product, it is produced by GKN a UK company.  It was sold to the Philippines and Malaysia.