Author Topic: Westland Wyvern Ideas and Inspiration  (Read 19728 times)

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Westland Wyvern Ideas and Inspiration
« on: February 18, 2012, 12:31:55 PM »
Hi folks,

A thread for your Westland Wyvern Ideas and Inspiration.

Regards,

Greg
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: Westland Wyvern Ideas and Inspiration
« Reply #1 on: February 18, 2012, 08:38:50 PM »
Sell 'em off as COIN aircraft to places that bought other British pop-jobs: Iraq, India, (or more of a stretch) Oman?
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #2 on: February 19, 2012, 04:15:26 AM »


All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #3 on: February 19, 2012, 04:40:33 AM »
Westland Whirlwind II:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #4 on: February 19, 2012, 05:13:51 AM »
A couple of pics of my Python test bed Lanc' and the nacelle would have been all engine, there's no room for a cockpit in there

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #5 on: February 19, 2012, 05:15:39 AM »
Are those metal props?
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #6 on: February 19, 2012, 05:24:20 AM »
Yes Greg, Aeroclub Wyvern props (1/72) and Lanc' paddle blades (which the FTB used apparently). I've got a photo of the RW set up somewhere on the computer but do you think I can find it --- :-X

D'oh! just found it --

No I haven't -- that's not it installed in the Lanc'   :icon_bofh:
« Last Edit: February 19, 2012, 05:31:13 AM by kitnut617 »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #7 on: February 19, 2012, 05:32:16 AM »
I wonder how all those might go for a 1/48 application - the Wyvern hub was quite large after all...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #8 on: February 19, 2012, 05:45:26 AM »
Trumpeter do a 1/48 Wyvern, and when I started my FTB I found that the Sea Fury cowling is a very close match in size  to do the early air intake version for the Wyvern.  IIRC, I used an Attacker rear fuselage for the rear end of the nacelle (or possibly the Hawk Swift kit, one or the other)
« Last Edit: February 19, 2012, 05:49:31 AM by kitnut617 »

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #9 on: February 19, 2012, 05:53:09 AM »
I've been thinking how you could adapt this to a twin engine Wyvern (or something a bit bigger) but as with my comment on putting a cockpit in there like your 'forward cockpit' idea, there's no room for a wheel bay.  My thoughts would be to do it very much like the Dart Herald set-up, that has the air intake on one side of the nacelle with the wheel bay directly behind the air intake, it looks offset when you view it head on.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #10 on: February 19, 2012, 06:02:40 AM »
One Wyvern was fitted with the RR Clyde, now with this engine you could put a forward cockpit as just aft of the first compressor stage, the engine got quite thin in section

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #11 on: February 19, 2012, 06:13:26 AM »
Trumpeter do a 1/48 Wyvern, and when I started my FTB I found that the Sea Fury cowling is a very close match in size  to do the early air intake version for the Wyvern.  IIRC, I used an Attacker rear fuselage for the rear end of the nacelle (or possibly the Hawk Swift kit, one or the other)

Yeah was aware of that - I should probably have been clearer:  I was looking at the metal aero club props for use on various 1/48 projects as contra props.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #12 on: February 19, 2012, 06:52:34 AM »
Yeah was aware of that - I should probably have been clearer:  I was looking at the metal aero club props for use on various 1/48 projects as contra props.

FYI, the props are 2 1/8" in diameter

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Westland Wyvern Ideas and Inspiration
« Reply #13 on: April 14, 2012, 03:58:31 AM »
How about a Wyvern with a guy in back?  Set up with the additional crew located in fuselage behind the pilot similar to the specialized night attack and electronic countermeasures platforms based on the Skyraider. 


***edit to correct the strike through that was appearing in the last portion of the text due to my errant use of brackets []***
« Last Edit: April 15, 2012, 07:32:24 AM by Jeffry Fontaine »
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Westland Wyvern Ideas and Inspiration
« Reply #14 on: April 15, 2012, 06:17:56 AM »
Wyvern engine installation mated to a XP-81 airframe?  A "Heavy Wyvern" similar to teh XA2D Skyshark?

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Westland Wyvern Ideas and Inspiration
« Reply #15 on: April 15, 2012, 02:47:03 PM »
Westland Whirlwind profiles in #3 looks good for 500mph.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #16 on: April 15, 2012, 11:15:51 PM »
Wyvern engine installation mated to a XP-81 airframe?  A "Heavy Wyvern" similar to teh XA2D Skyshark?

I like that idea, would you still use the jet engine in the rear ?  Would there be enough room for the nose wheel bay though, considering the size of a Python ?

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #17 on: July 07, 2012, 06:01:28 AM »
Any suggestions on doing a 1/48 Wyvern Mk1 with RR Eagle Piston Engine?



All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: Westland Wyvern Ideas and Inspiration
« Reply #18 on: February 26, 2015, 05:07:24 AM »


I quite like the look of this. Combined with tiptanks and perhaps a big radial I may have something....

Greg - any suggestions as to how I may achieve (something approaching) this canopy with the Trumpy 1/72 kit?
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline perttime

  • The man has produced a Finnish Napier Heston Fighter...need we say more?
Re: Westland Wyvern Ideas and Inspiration
« Reply #19 on: February 26, 2015, 04:27:00 PM »
The piston powered ones look much better in my eyes. Is it just me or is the cockpit raised more in the later models?
- Could a fuselage back with straighter lines be grafted onto a wyvern?
- Put a BIG radial engine on it?

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: Westland Wyvern Ideas and Inspiration
« Reply #20 on: February 27, 2015, 03:26:19 AM »
I was thinking Skyraider engine, after reading about the idea at another forum...
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Cliffy B

  • Ship Whiffer Extraordinaire...master of Beyond Visual Range Modelling
  • Its ZOTT!!!
    • My Artwork
Re: Westland Wyvern Ideas and Inspiration
« Reply #21 on: February 27, 2015, 03:36:55 AM »
Westland Whirlwind II:




It....MUST...be...BUILT!!!!!!!!
"Radials growl, inlines purr, jets blow!"  -Anonymous

"Helos don't fly.  They vibrate so violently that the ground rejects them."  -Tom Clancy

"If all else fails, call in an air strike."  -Anonymous

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Westland Wyvern Ideas and Inspiration
« Reply #22 on: February 27, 2015, 03:41:02 AM »
Westland Whirlwind II:

It....MUST...be...BUILT!!!!!!!!

Glorious prop hotrod.
Yes - It....MUST...be...BUILT!!!!!!!!

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: Westland Wyvern Ideas and Inspiration
« Reply #23 on: February 27, 2015, 03:41:56 AM »
My one that's just arrived is earmarked for a more standard layout, but someone has to do this!

What're everyone's views on a radial-engined Wyvern, say with an R-3350 or - goodness - an R4360 up front, with standard prop? On paper the Skyraider has less HP but the airframe is bigger, so perhaps its engine could work well in the Wyvern? I envisage a re-engined Wyvern as being a real mud-mover, so the greater speed offered by the Python wouldn't be needed.
« Last Edit: February 27, 2015, 03:47:08 AM by KiwiZac »
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Westland Wyvern Ideas and Inspiration
« Reply #24 on: February 27, 2015, 06:25:28 AM »
A "Centaurus Major" perhaps?  A four-row engine using essentially the cylinders from two Centaurus engines much as the Wasp Major (R4360) used R2800 cylinders.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #25 on: February 28, 2015, 10:36:25 AM »
R-4360 is the way to go, the airframe was at least designed for a 5000 hp engine

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Westland Wyvern Ideas and Inspiration
« Reply #26 on: March 02, 2015, 09:32:56 AM »
Westland Whirlwind II:




It....MUST...be...BUILT!!!!!!!!


Fuselage needs to be stretched but I agree, someone (other than me) must build it! :-*
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #27 on: March 02, 2015, 05:46:40 PM »
Fuselage was stretched for that one.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Westland Wyvern Ideas and Inspiration
« Reply #28 on: March 02, 2015, 06:13:33 PM »
Really? ???

Wow! :icon_surprised:

Still looks like it could do with a longer rear fuselage. ;)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Westland Wyvern Ideas and Inspiration
« Reply #29 on: May 22, 2016, 07:48:44 PM »
John Lacey posted some Wyverns in USN and Marines colours:






Source: Facebook - John's Aircraft & Armour Profile Page
« Last Edit: May 22, 2016, 07:50:39 PM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #30 on: May 22, 2016, 08:03:16 PM »
Westland Whirlwind II:




Because I'm on an F-82 kick right now, have you done one of these like an F-82 ? Think it would look really good myself. I think I would give it double wheels on each main gear and have them retract rearward into a bay between the exhausts in the fuselage.
« Last Edit: May 22, 2016, 08:05:25 PM by kitnut617 »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #31 on: May 23, 2016, 02:29:16 AM »
Some more US ones by some of our other artists:




And a French one:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #32 on: May 23, 2016, 02:37:08 AM »
have you done one of these like an F-82 ?

Haven't done one yet, though it certainly could be done.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: Westland Wyvern Ideas and Inspiration
« Reply #33 on: May 29, 2016, 10:52:14 PM »
Khemed!
kwyxdxLg5T

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: Westland Wyvern Ideas and Inspiration
« Reply #34 on: May 30, 2016, 12:47:58 PM »




Looking at those two, it just struck me that the top one has the pilot sitting in the middle of the engine, but you could solve that by moving the engine behind the pilot, with the straight-through exhaust of the second one and side intakes, something like this:



Changes:

Tail unit raised and filleted to make space for jetpipe and tailwheel+hook arrangement.

Slot intakes added behind cockpit, based on original nose intake (they'd probably look like Attacker intakes).

Props moved slightly further back and new fairing added.

« Last Edit: May 30, 2016, 12:50:56 PM by Weaver »
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Westland Wyvern Ideas and Inspiration
« Reply #35 on: May 30, 2016, 06:46:31 PM »
The first design of the Wyvern was like that Harold, see the BSP book 'Fighters & Bombers 1835-1950', only it was using the RR Eagle engine, not the Python.  I bought one of those resin Wyvern TF.1 kits to do it ---

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #36 on: May 31, 2016, 02:49:03 AM »
I bought one of those resin Wyvern TF.1 kits to do it ---

I wish someone would do the RR Eagle engined variant in 1/48 - even just a conversion kit.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline aerospacer

  • Newly Joined - Welcome me!
Re: Westland Wyvern Ideas and Inspiration
« Reply #37 on: June 06, 2016, 01:48:11 AM »
W.36 turbojet Wyvern!

http://www.airvectors.net/avwhirl.html

Martin
Would be marching to the beat of his own drum, if he didn't detest marching to any drumbeat at all so much.

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: Westland Wyvern Ideas and Inspiration
« Reply #38 on: June 06, 2016, 07:24:44 PM »
 Aerodynamically cleaned up, post WWII Schneider Trophy, single centre float, float plane variant.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Westland Wyvern Ideas and Inspiration
« Reply #39 on: June 06, 2016, 11:48:26 PM »
Wyvern powered by:

R-3350 ------ Kit bash with Monogram-Revell / Matchbox-Revell /ESCI-Italeri / Tamiya A-1 Skyraider for the R-3350 parts

R-4360 ------ Kit bash with the Special Hobby/Accurate Miniatures F2G Corsair for the R-4360 parts

The various Skyraider kits give you some options on matching the engine cowling up with the Wyvern parts.  Not sure how the F2G parts would fare in this but hey, it is just an idea that I had to share. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Westland Wyvern Ideas and Inspiration
« Reply #40 on: June 07, 2016, 12:18:37 AM »
Wyvern powered by:

R-4360 ------ Kit bash with the Special Hobby/Accurate Miniatures F2G Corsair for the R-4360 parts

The various Skyraider kits give you some options on matching the engine cowling up with the Wyvern parts.  Not sure how the F2G parts would fare in this but hey, it is just an idea that I had to share.

Funny you should mention the F2G as a donor. I have dry fitted a Wyvern Prop assembly on a F2G with a Skyraider cowling so I have a R4360 available to mount on a Wyvern.
« Last Edit: June 07, 2016, 12:31:13 AM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Westland Wyvern Ideas and Inspiration
« Reply #41 on: June 07, 2016, 01:02:23 AM »
Nice to know I am not the only one that comes up with ideas that can consume several kits in the process of creating something different :)
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Westland Wyvern Ideas and Inspiration
« Reply #42 on: May 06, 2017, 03:55:29 AM »
Watching PhlyDaily on YouTube flying a Wyvern in War Thunder this afternoon and really got to appreciate the performance [yeah, it is a game but it looked good] of the Wyvern maneuvering against other aircraft and blasting them out of the sky with short bursts of 20mm, quite inspiring I must admit. 

Two things about the Wyvern that always bugged me was the two finlets on the horizontal stabilizers and lack of a clear canopy behind the pilot.  While it was designed as an attack and torpedo carrying aircraft with the fighter mission sort of taking on the lowest priority for the mission it seems to me that the Wyvern would have benefited from having a full canopy with a view to the rear quarters that was not obscured as it is on the real aircraft.  The horizontal stabilizer mounted finlets might also be removed and replaced with a fillet on the vertical stabilizer, something akin to what was found on the later models of the P-47 Thunderbolt perhaps. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Rickshaw

  • "Of course, I could be talking out of my hat"
Re: Westland Wyvern Ideas and Inspiration
« Reply #43 on: May 06, 2017, 11:13:23 AM »
I believe the finlets were designed to catch the engine exhausts and have greater control authority for the rudder.   Many single-engined turboprop aircraft had them in the early 1950s - Gannet for example.   I like the look of them, rather British really.   "What?  Need more rudder control?  How about we add some finlets?  Hey?" 

Offline Kelmola

  • Seeking motivation to start buillding the stash
Re: Westland Wyvern Ideas and Inspiration
« Reply #44 on: May 07, 2017, 06:00:32 AM »
Not only turboprops - AEW variants of the Skyraider had them too.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Westland Wyvern Ideas and Inspiration
« Reply #45 on: September 21, 2017, 02:07:02 AM »
Just a cool and hopefully inspiring picture:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Re: Westland Wyvern Ideas and Inspiration
« Reply #46 on: June 04, 2018, 06:29:52 PM »
Found on french forum Master194.com:



More pics here :
http://www.master194.com/forum/viewtopic.php?f=4&t=100909&start=50#p1298821

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Westland Wyvern Ideas and Inspiration
« Reply #47 on: June 04, 2018, 09:53:28 PM »
Very different but very, very nice! 8)

I love it! :-*

Camo (& the replaced outer starboard wing) is awesome. :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Kelmola

  • Seeking motivation to start buillding the stash
Re: Westland Wyvern Ideas and Inspiration
« Reply #48 on: June 05, 2018, 02:49:16 AM »
The camo is awesome... and must have taken AGES to paint :o