Well, the SA and SE are probably NOT using the old -A SUU-61 pylons for STN's 1/9... I just got my Hasegawa "A" (really a C with some backdating parts) and mocked it up, and for the shoulder rails they show the SE and proposals for SA having, the pylon needs to be at least as deep as the inboard SUU-59s.
I'm not even sure there'd be clearance for two AIM-9X or AIM-120 using a Dual Rail Adapter hung off the SUU-61... which would would really only need clearance for the upper fins.
EDIT: taking measurements confirms it. In 1/48, the SUU-59 is 6.5mm from wing lower surface to the centerline of the ADU-552's, while the SUU-61 is only 5mm to its bottom surface. Measuring from the top of the pylon at the wing LE to the bottom, SUU-59 is 12mm tall, -61 only 5, which says it needs to be upscaled by a factor of 2.5 in the vertical axis, or replaced with a longitudinally-reduced SUU-59 derivative.