Author Topic: Tracing the inside of a shape.. BRILLIANT !  (Read 4952 times)

Offline ChrisF

  • Doesn't mind rough when he knows its gonna be rough...
  • Ham-fisted? Maybe. Master modeller? Definitely!
Tracing the inside of a shape.. BRILLIANT !
« on: July 29, 2013, 06:51:20 AM »
Need to create an extra bulkhead for example ?

This i found while surfing the web is fantastically simple im really annoyed i didnt think of it myself... Its brilliant !

http://www.fcmodeltips.com/2013/07/copiar-la-forma-interior-de-un-fuselaje.html

Oh dont panic if you dont know (Im assuming) italian... There is a english translation there too :)

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #1 on: July 29, 2013, 07:40:25 AM »
That IS rather clever!  :)
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #2 on: July 29, 2013, 11:13:23 AM »
The solder wire idea is great but if you want to do that on a larger subject it will be a bit of a challenge.  For situations such as that you can purchase what is called a Contour Gauge. 

Example of a metal pin contour gauge in this YouTube video:
12 inch Contour Gauge @ Trick Tools



There is also a plastic version of the contour gauge that is slightly less expensive:

 
Plastic 10 inch Contour Gauage 


There is also another contour tool that you might want to check into that is used by people for the purpose of draughting and mechanical drawing called a Flexible Curve Drafting Tool.  An example of this can be seen in the image below and the html link to the item at Amazon.com. 



I have all three of these contour gauge/drafting tools and they all fill a particular role depending on the type of surface to be worked on. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline ChrisF

  • Doesn't mind rough when he knows its gonna be rough...
  • Ham-fisted? Maybe. Master modeller? Definitely!
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #3 on: July 30, 2013, 07:25:55 AM »
Ive seen contour gauges before but the ones ive seen have all been very expensive and lets be honest for MOST of us how often will it be used ?!

For most uses this idea will suit most of us for the occasional time its needed :)

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #4 on: July 30, 2013, 03:16:10 PM »
Ive seen contour gauges before but the ones ive seen have all been very expensive and lets be honest for MOST of us how often will it be used ?!

For most uses this idea will suit most of us for the occasional time its needed :)

Chris, the smaller plastic and metal contour gauges are quite affordable.  I don't believe either of mine were much more than six dollars and that was twenty years ago when I purchased the things. 
True about not using them often but a tool in the tool box waiting to be used is better than having the need for said tool and not have it in the tool box. :)
« Last Edit: August 04, 2013, 08:42:44 AM by Jeffry Fontaine »
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Weaver

  • Skyhawk stealer and violator of Panthers, with designs on a Cougar and a Tiger too
  • Chaos Engineer & Evangelistic Agnostic
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #5 on: July 30, 2013, 07:20:11 PM »
The problem I've always had with using contour gauges on very small things is that the pins tend to deflect around small, sharp features rather than being pushed up by them, so a degree of fine detail is lost.

I've got a copper ruler on order from Hannants which is sold as a scribing aid, but may well have applications for this too. I'll report on it when I get it.
"I have described nothing but what I saw myself, or learned from others" - Thucydides

"I've jazzed mine up a bit" - Spike Milligan

"I'm a general specialist," - Harry Purvis in Tales from the White Hart by Arthur C. Clarke

Twitter: @hws5mp
Minds.com: @HaroldWeaverSmith

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #6 on: July 30, 2013, 09:57:45 PM »
I have a couple of the items mentioned, the flexy-rule though I've had since the 70's.  It was an invaluble tool when I was doing technical drafting at college (and after and still have it in the top draw of my desk).  I use the profile gauges more often than I thought I would for my models, I started with a very cheap one from a hardware store which is all metal, but last year I got one just like that red and black one Jeff posted further up. It was under C$20 but the bonus with this particular one is you can join other ones to it to make a much longer one.  Perfect for checking long fuselage kitbashes like the Avro Atlantic I'm building.

Offline Alvis 3.1

  • Self acknowledged "Bad Influence"…but probably less attractive than Pink
  • The high priest of whiffing
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #7 on: July 31, 2013, 12:54:01 AM »
If you have the room for this, I made this work:
Plastiscene rolled into ropes, gently applied inside the subject, then placed the whole shebang in the fridge. Chill for a while and remove from fridge, then gently remove from subject. Plasticene hardens up quite nicely and can then be traced around gently go give you an accurate contour.


Alvis 3.1

Offline ChrisF

  • Doesn't mind rough when he knows its gonna be rough...
  • Ham-fisted? Maybe. Master modeller? Definitely!
Re: Tracing the inside of a shape.. BRILLIANT !
« Reply #8 on: July 31, 2013, 06:41:23 AM »
VERY true Jeff ! Exactly the reason i have a rivetter tool ! :D

If you have the room for this, I made this work:
Plastiscene rolled into ropes, gently applied inside the subject, then placed the whole shebang in the fridge. Chill for a while and remove from fridge, then gently remove from subject. Plasticene hardens up quite nicely and can then be traced around gently go give you an accurate contour.

Alvis 3.1

Also Genius !!! I love such left field thinking !  :D
« Last Edit: July 31, 2013, 06:43:46 AM by ChrisF »