Author Topic: AgTW 35t  (Read 6902 times)

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
AgTW 35t
« on: October 07, 2016, 05:13:09 AM »
Aufklarungsgerat Trager und Werfer 38t.  My plan is for a Pz 35t-based machine which will carry two As 292 reconnaissance drones and mount a compressed-air catapult launcher to launch an As 292.  Recovery would be by normal wheeled landing.   It will be built on a Pz35t chassis.  The As 292s will be scratchbuilt, as will the catapult. 

It's an ambitious plan, and I hope to be able to pull it off. 

BTW, forgive my inability to type an umlaut, and feel free to correct my German nomenclature.  Any ideas and suggestions are welcome. 

Chuck
« Last Edit: November 02, 2016, 10:53:17 PM by Acree »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: AgTW 38t
« Reply #1 on: October 07, 2016, 05:14:57 AM »
Looking forward to this
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline LemonJello

  • MARPAT Master
  • Moderator
  • Member number 100...WooHoo!!!
Re: AgTW 38t
« Reply #2 on: October 07, 2016, 08:24:45 PM »
Sounds like a most interesting project.  Will be looking forward to progress reports.

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: AgTW 38t
« Reply #3 on: November 01, 2016, 12:38:43 AM »
I have been making some progress on this project. I am NOT an armor builder, and I have never before built a kit with rigid, individual track links.  I botched them pretty badly, but I'm hoping the tracks will not be the focal point of the build.

I replaced the turret with a small "conning tower" structure made from the nose section of a 1/72 PB4Y. The catapult structure is basically complete, just needs supporting structure and compressed air piping. I have scratched an air compressor and tank, and have two barrels to carry fuel for the As 292s.

Still to do: boom crane for lifting the As 292 to the catapult and building the As 292 themselves.

I'm not happy with the tracks, but otherwise I'm liking where this is going. I start a 1.5 week trip tomorrow, so little work will be done before the 11th.

Photos will follow shortly

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: AgTW 38t
« Reply #4 on: November 01, 2016, 01:03:44 AM »
Which 38(t) kit are you using? If it's 1/35, there are aftermarket tracks that can be used in a pinch, or if the error can be moved to the upper runs, just add a skirt to hide them.

Sounds liek a great idea - are you going to add a German TV display as well?

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: AgTW 35t
« Reply #5 on: November 01, 2016, 02:44:39 AM »
It's the Revell Germany kit in 1/35. The problem is not the tracks themselves, but the alignment of the drive sprockets and running gear. And since I used cyano-acrylic glue there's probably nothing I can really do now. I do appreciate the suggestion though.

No German TV display.  The As292 did still, wet photography only. An accompanying van for photo-development darkroom and photo interpreters would be a good project.
« Last Edit: November 02, 2016, 10:51:54 PM by Acree »

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: AgTW 35t
« Reply #6 on: November 01, 2016, 03:39:02 AM »
Pics of air compressor assembly and main catapult frame in place
« Last Edit: November 02, 2016, 10:52:15 PM by Acree »

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: AgTW 38t
« Reply #7 on: November 01, 2016, 08:00:39 AM »
I think that's a Panzer 35(t): https://en.wikipedia.org/wiki/Panzer_35(t)

The track doesn't look that bad - you can always break any bad spots and realign the section (unless it's good and solidly glued to the wheels).

The air compressor looks good!

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: AgTW 38t
« Reply #8 on: November 01, 2016, 11:48:13 PM »
It is a Pz.Kpfw. 35(t), to use the Czech LT vz. 35's German nomenclature.

Still, the LT vz. 35 was in use from 1936 to about 1950, in one form or another.
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: AgTW 35t
« Reply #9 on: November 02, 2016, 12:09:42 AM »
Quite right! My relative lack of knowledge of armor prevented me from noticing that I had used the wrong numeral. My apologies for the confusion!

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: AgTW 35t - FINISHED
« Reply #10 on: November 25, 2016, 09:55:58 AM »
I finished the AgTW 35t.  A few changes from the original plan: only 1 As 292 (because it would have been a real challenge to scratch two that were identical, and also because the Pz 35t was really small!).  Also, no boom crane, since the As 292 weighed under 100 pounds.  I'm quite happy with how everything turned out.  Standing by for comments!

Awtg-35-2 by cacree, on Flickr

Awtg-35-2 by cacree, on Flickr

Awtg-35-2 by cacree, on Flickr

As29 by cacree, on Flickr

As29 by cacree, on Flickr


Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: AgTW 35t
« Reply #11 on: November 25, 2016, 10:12:42 AM »
This is way cool. Nice Alternate-WWII where drones became common place. Opens up a world of opportunities for land, sea and air drone designs.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Full Member
  • Stylishly late...because he was reading comics
Re: AgTW 35t
« Reply #12 on: November 25, 2016, 11:23:28 AM »
That's incredible  :-*

Love modern ideas back dated and this works wonders!
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline Camthalion

  • The man has done a pink tank...need we say more?!
Re: AgTW 35t
« Reply #13 on: November 25, 2016, 12:35:41 PM »
That is really cool.  Nice work

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: AgTW 35t
« Reply #14 on: November 26, 2016, 04:40:40 AM »
Outstanding!! :) :)
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Reportedly finished with a stripper...
Re: AgTW 35t
« Reply #15 on: November 26, 2016, 04:55:02 AM »
Crazy good!
The Germans worked on some wierd stuff so why not this.  :-*

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: AgTW 35t
« Reply #16 on: November 26, 2016, 05:08:56 AM »
Excellent work! That drone looks very believable and the compressor came out great. The tracks looks good, too. How long before someone re-kits this?

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: AgTW 35t
« Reply #17 on: November 26, 2016, 07:09:22 AM »
Thanks guys.  It seems as though some of you might be under the impression that I "made up" the As 292.  In reality, it was a real aircraft and about 100 were built in the "real world."  Do an internet search for "As 292" and you can judge for yourself how well I did on scratch building it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: AgTW 35t
« Reply #18 on: November 26, 2016, 07:55:18 AM »
Well make me a target!! I did not know that the As 292 existed. Learning something new everyday.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: AgTW 35t
« Reply #19 on: November 26, 2016, 11:26:23 PM »
Neat! :)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: AgTW 35t
« Reply #20 on: November 28, 2016, 07:06:48 AM »
 I like it. A lot !

Offline LemonJello

  • MARPAT Master
  • Moderator
  • Member number 100...WooHoo!!!
Re: AgTW 35t
« Reply #21 on: November 28, 2016, 08:47:00 PM »
Well done! I shudder to think about putting that tiny aircraft together.  I like the look of this project.