Author Topic: CAF CF-104E  (Read 4112 times)

Online The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
CAF CF-104E
« on: July 26, 2018, 02:47:46 AM »
Future project. CF-104A with F-16D wings. Also upgrade to either a General Electric F110-GE-129 or Pratt & Whitney F100-PW-220/220E replacing the Orenda J79-OEL-7.


CF-104E-02
by Big Gimper, on Flickr
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: CAF CF-104E
« Reply #1 on: July 26, 2018, 04:09:15 AM »
Niiiiice!  8)

No intakes fitted so far. Hmmmmm. F-15-ish ones?
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Online The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: CAF CF-104E
« Reply #2 on: July 26, 2018, 04:16:09 AM »
Thanks. Wings are about 25% larger than RW wings. Could be, still investigating.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: CAF CF-104E
« Reply #3 on: July 26, 2018, 06:45:16 AM »
Very nice!!  The engine change is going to require a re-contouring of the aft end as either of the new engines is roughly 10 inches greater in diameter than the J79 and that's going to need structure external to that envelope.  You might look at how and where you can splice in a trimmed portion of an F016 aft end.

Online The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: CAF CF-104E
« Reply #4 on: July 26, 2018, 07:01:21 AM »
Very nice!!  The engine change is going to require a re-contouring of the aft end as either of the new engines is roughly 10 inches greater in diameter than the J79 and that's going to need structure external to that envelope.  You might look at how and where you can splice in a trimmed portion of an F016 aft end.

Thanks Evan. You zeroed in the problem and the possible solutions. I don't have and scrap F-104 to test my approach so I need to build it mentally first.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline kill me now, put me out of pain

  • Holding Pattern
  • *
  • What, is this place facebook, delete my account
Re: CAF CF-104E
« Reply #5 on: July 28, 2018, 12:17:43 AM »
x
« Last Edit: September 03, 2019, 12:51:23 AM by mundster »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: CAF CF-104E
« Reply #6 on: July 28, 2018, 07:04:16 AM »
I'm liking... :smiley:
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Alvis 3.1

  • Self acknowledged "Bad Influence"…but probably less attractive than Pink
  • The high priest of whiffing
Re: CAF CF-104E
« Reply #7 on: July 28, 2018, 03:19:21 PM »
Carl,

What Starfighter is moulded in red plastic?

all best
John

The Esci CF-104 "Arrow/Toothbrush" scheme, and possibly Darryle Greenameyer's civvie bird too.

Alvis 3.1something

Online The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: CAF CF-104E
« Reply #8 on: July 28, 2018, 07:38:27 PM »
Carl,

What Starfighter is moulded in red plastic?

all best
John

The Esci CF-104 "Arrow/Toothbrush" scheme, and possibly Darryle Greenameyer's civvie bird too.

Alvis 3.1something


Thanks Al.  It's the 421 SQN Toothbrush. 
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline kill me now, put me out of pain

  • Holding Pattern
  • *
  • What, is this place facebook, delete my account
Re: CAF CF-104E
« Reply #9 on: July 28, 2018, 11:48:13 PM »
x
« Last Edit: August 27, 2019, 12:50:46 PM by mundster »

Offline Kerick

  • Reportedly finished with a stripper...
Re: CAF CF-104E
« Reply #10 on: July 29, 2018, 12:45:38 AM »
This will look great! I would keep the T tail just the way it is. What other ac use an F 100 size engine that might be easier to graft on than an F -16?

Online The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: CAF CF-104E
« Reply #11 on: July 29, 2018, 10:17:42 AM »
Carl,

What Starfighter is moulded in red plastic?

all best
John




Thanks Al.  It's the 421 SQN Toothbrush.

ESCI!

So you got that one at Hobby Centre?

I had seen it months ago, and was in the market for a Stargighter, so I went down this week and looked for it for about 15 minutes. Luckily I found the Heller kit, comes with a 2 seater, for a song (sort of.)

We are the only 2 guys in Ottawa hunting down 1/72nd CF-104s.

Mind you, I don't think I'd have been keen on the red plastic ... hard to paint over with a brush.

all best
John

Busted! It was me John and my sticky fingers. I did not know it was red.  With one coat of grey primer and 2 coats of Ghost Grey or similar colour, it should be okay.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Online The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: CAF CF-104E
« Reply #12 on: July 29, 2018, 11:56:00 AM »
This will look great! I would keep the T tail just the way it is. What other ac use an F 100 size engine that might be easier to graft on than an F -16?

Oh, you have done this already?  ;D Yeah, changing out the exhaust is going to be tricky. Will look for other options.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: CAF CF-104E
« Reply #13 on: July 29, 2018, 01:52:25 PM »
One option for changing out the exhaust would be an engine nacelle, specifically the rear half thereof, from a 1/48 B-58.  I still think that, despite the effort and trimming required, using the back end of an F-16 would be the easiest way.  I suppose that if ease was more important that cost, you could use the back end of a 1/48 T-50 or F-20.