Author Topic: Valom  (Read 30763 times)

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Valom
« on: April 09, 2015, 07:30:26 AM »
I'm so happy!!!!





Got 32 on order from West Coast Hobbys.
« Last Edit: April 09, 2015, 07:48:44 AM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: Valom
« Reply #1 on: April 09, 2015, 08:34:22 AM »
I'm so happy!!!!<...>
So am I!  :-*

<...> Got 32 on order <...>
Yeah, maybe not that happy, though.  ;D
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #2 on: April 09, 2015, 09:03:27 AM »
I'm so happy!!!!<...>
So am I!  :-*

<...> Got 32 on order <...>
Yeah, maybe not that happy, though.  ;D

Okay. Not 32.  Only two of the F-101Cs. One RCAF and one Flygvapnet.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Kerick

  • Reportedly finished with a stripper...
Re: Valom
« Reply #3 on: April 09, 2015, 09:17:19 AM »
Of course I have the update F-101C Voodoo sitting on my bench that I converted from a Hasegawa RF-101. Waaah!
Of course, now it will be easier to build another.

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: Valom
« Reply #4 on: April 09, 2015, 01:35:44 PM »
We thank you for "taking one for the team", kerick!  :) Perhaps you would like to build and superdetail a Heller SAAB Viggen next, no?  ;D
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline Kerick

  • Reportedly finished with a stripper...
Re: Valom
« Reply #5 on: April 09, 2015, 08:04:04 PM »
Yeah, converting a kit to something that doesn't exist always motivates a model company to issue it a month later. Glade I could help!

Offline upnorth

  • Distorting a reality near you.
  • You want maple syrup on that Macchi?
Re: Valom
« Reply #6 on: April 09, 2015, 11:55:26 PM »
I likely won't be purchasing one, not a big fan of single seat Voodoos, but if that RF-101C kit means that the Frog/Hasegawa monstrosity is on a one way trip to the styrene boneyard it can only be good news.
Pickled Wings, A Blog for Preserved Aircraft:
http://pickledwings.com/

Beyond Prague, Traveling the Rest of the Czech Republic:
http://beyondprague.net/

Offline Kerick

  • Reportedly finished with a stripper...
Re: Valom
« Reply #7 on: April 10, 2015, 12:49:12 AM »
Does anyone have experience with this company? Can we expect quality? A straight up F-101C might be nice to build if these kits are decent.

I did replace the wheels and seat on the the one on my bench with parts from a Hasegawa Phantom. Its an improvement.
« Last Edit: April 10, 2015, 12:51:04 AM by kerick »

Offline upnorth

  • Distorting a reality near you.
  • You want maple syrup on that Macchi?
Re: Valom
« Reply #8 on: April 10, 2015, 01:35:16 AM »
Does anyone have experience with this company? Can we expect quality? A straight up F-101C might be nice to build if these kits are decent.

I did replace the wheels and seat on the the one on my bench with parts from a Hasegawa Phantom. Its an improvement.


They are multimedia kits, so you can expect resin and PE parts in the mix. While they have made improvements to plastic molding over the past couple of years, they aren't "shake and bake" kits.

I built their Fisher P-75 Eagle a few years ago and it was a real fight, primarily because the styrene was thick, hard and needed to be cut off the sprue with a razor saw.

Their more recent kits, like the Fouga Magister are much better in such regards.

Here's reviews of a couple of their more recent releases:

http://www.hyperscale.com/2014/reviews/kits/valom72083reviewmd_1.htm

http://www.detailscaleview.com/2014/09/valom-172-vickers-wellesley-mki-african.html
Pickled Wings, A Blog for Preserved Aircraft:
http://pickledwings.com/

Beyond Prague, Traveling the Rest of the Czech Republic:
http://beyondprague.net/

Offline Kerick

  • Reportedly finished with a stripper...
Re: Valom
« Reply #9 on: April 10, 2015, 03:51:07 AM »
Thanks for the information. If this is any indication their work keeps getting better so these F-101s might be decent. Now if the price is right......

Offline Chris

  • An old friend and connoisseur of whiffing...
Re: Valom
« Reply #10 on: April 10, 2015, 10:20:29 PM »
I've built a few of their kits, the P.75 and Brigand among others, and as said they are definitely not shake and bake and require a level of skill and patience.

However I recently got their new tool Bristol Bombay and have started it. They do seem to have improved over their earlier kits. A better fit and it is going ok at the moment - touching wood.

Most companies improve with time (witness AZ and RS who improved their quality very quickly IMHO) but Valom seem to have taken a little longer then most

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #11 on: September 12, 2015, 02:39:28 AM »
So bright... so beautiful... ah, Precious.

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Valom
« Reply #12 on: September 12, 2015, 03:51:10 AM »
Bah!  Wrong scale!
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Dr. YoKai

  • Was in High School when mastadons roamed the plains...
  • A notorious curmudgeon who is partial to...hemp!
Re: Valom
« Reply #13 on: September 13, 2015, 01:37:59 AM »
Well, I'm delighted! ;)

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #14 on: January 31, 2016, 07:38:46 PM »
Through Rob Stevens at West Coast Hobbys, I leaned that Valom will be releasing a F-101A and RF-101A to complete their existing F-101C and RF-101C. Also a Fokker T.5.










« Last Edit: January 31, 2016, 08:08:18 PM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #15 on: April 27, 2016, 10:03:40 AM »
Not a great image but here is the next He 119 release.



Would look great beside R2Y1.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Valom
« Reply #16 on: April 28, 2016, 02:32:42 AM »
Would look great beside R2Y1.

Would look even better in 1/48... :(
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #17 on: September 22, 2016, 07:03:30 PM »
1/72 McDonnell RF-101G/H Voodoo

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #18 on: September 22, 2016, 07:08:09 PM »
Another new decal release:

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Valom
« Reply #19 on: September 23, 2016, 04:55:30 AM »
I wish someone would release a He119 in 1/48.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #20 on: March 08, 2017, 07:12:53 PM »
Coming in 2017: B-45A Tornado

The variants announced:
Ref. 72120 - North American B-45A Tornado - expected April 2017
Ref. 72121 - North American B-45C Tornado - expected April 2017
Ref. 72122 - North American RB-45C Tornado - expected October 2017
Ref. 72123 - North American RB-45C Tornado (RAF) - expected October 2017

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Valom
« Reply #21 on: March 09, 2017, 05:09:38 AM »
Goes on "Must Buy" list.
Wonder if they can spell "XB-15" ?

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #22 on: April 23, 2017, 06:25:52 PM »
The kind modelers at IPMS Nymburk in the Czech Republic have posted sprue shots, instructions etc on the B-45 kit.

For example:




The full review is here: http://www.ipmsnymburk.com/forum/viewtema.php?ID_tema=39722
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Valom
« Reply #23 on: April 23, 2017, 07:31:55 PM »
This is a GOOD thing.  :)

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #24 on: June 01, 2017, 09:49:18 AM »
Another decal rebox of the F-101A/RF-101C Voodoo |European mission|


Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...