Author Topic: NATO's LanceR- a Romanian MiG 21MF in 1/48 (Read 16938 times)

chukw · « **on:** June 24, 2015, 03:29:58 AM »

Time for a new project! The kindly folks at Icaerodesign approached to review and build their recent conversion set that allows one to build a Romanian version of the famous MiG fighter. They gave me an Eduard "overtrees" kit, their resin conversion and and an extra baggie of resin treats. In case you missed my review, you can see it here: or here. Let's kick this off!

GTX_Admin · « **Reply #1 on:** June 24, 2015, 04:12:43 AM »

Watching this one intently...

elmayerle · « **Reply #2 on:** June 24, 2015, 05:40:05 AM »

Now this is going to be a real beauty.

FAAMAN · « **Reply #3 on:** June 24, 2015, 12:20:15 PM »

Looking forward to this build with baited breath

The pilot looks very professional too

taiidantomcat · « **Reply #4 on:** June 27, 2015, 02:05:27 AM »

Very exciting!! Can't wait to see a more modern warplane getting the ChukW treatment! :)

chukw · « **Reply #5 on:** August 31, 2015, 08:01:43 AM »

Thanks, guys! Friends, life has been really busy as of late- but good things are coming. This may be my last update for a couple of months- we'll have to see what happens. In the meantime, Kapitain Andreea is back to show you the latest. Cheers!

Old Wombat · « **Reply #6 on:** August 31, 2015, 08:57:54 AM »

Missed the start of this build, somehow. $:-\$

Awesome work, as usual, Chuk!

elmayerle · « **Reply #7 on:** August 31, 2015, 10:30:10 AM »

Again, gorgeous work. Is Eduard's kit a new molding or an adaptation of the old OEZ molding? As I remember, the OEZ kit was quite good when it came out.

arkon · « **Reply #8 on:** August 31, 2015, 12:51:42 PM »

FAAMAN · « **Reply #9 on:** August 31, 2015, 01:15:44 PM »

Simply superb as usual

Volkodav · « **Reply #10 on:** August 31, 2015, 06:01:04 PM »

I love these builds and hang out for the updates. While I know I may never have the skill or patience to achieve such results it is a pleasure watching a master.

Old Wombat · « **Reply #11 on:** August 31, 2015, 10:33:29 PM »

Quote from: Volkodav on August 31, 2015, 06:01:04 PM

I love these builds and hang out for the updates. While I know I may never have the skill or patience to achieve such results it is a pleasure watching a master.

"May never"?

Lucky you!

"Will never, ever", is more my speed.

Artoor_K · « **Reply #12 on:** September 01, 2015, 04:23:14 AM »

WOW, ChukW is building modern jest! Waiting for updates , master :)

trickyrich · « **Reply #13 on:** September 01, 2015, 06:06:35 AM »

as usual Chuk I an completely in awe!!!!

Some how I missed the start of this one which is strange for me. I did a project like this a couple of years ago (the Czech "Splinter MiG"), I wish had this as a guide back then...I did the air brakes wrong!

Can't wait for future instalments.

chukw · « **Reply #14 on:** September 03, 2015, 02:23:21 AM »

Wow- many thanks, Comrades!

Elmayerle, the Eduard kit is all new tooling, and a real Cadillac of a kit. The Brassin stuff is gorgeous, and the Icaerodesign set allows you to not only model a great color schme, but you don't have to paint any of that Russky puke-turquoise interior color.

Once I move a mountain or two, I'll be back with more MiG madness- cheers!
chuk

Brian da Basher · « **Reply #15 on:** September 09, 2015, 03:59:55 AM »

You've got so much talent it's just scary, Chuk!

The detail work is simply exquisite and I like how you used native Romanian currency to give a sense of scale.

I don't think I've seen you build something besides W.W. II subjects, so following along this one will be a treat!

Brian da Basher

CSMO · « **Reply #16 on:** September 16, 2015, 02:57:58 AM »

I can see you at New York Fashion Week with a line of hot ladies wear tailored from Nomex and flight and G-suits. You are the Master of Fiddly Bits. I look forward to your further installments. Adios, Larry.

chukw · « **Reply #17 on:** September 19, 2015, 03:02:40 AM »

Thanks, guys- you're too kind!

Here's what holding up this project:

All we need to do now is maintain the "showcase" nature the house is in until it sells, get it into escrow, buy the new place up on Whidbey Island in Washington, move and set back up! I appreciate your patience in the meantime.

Cheers!
chuk

chukw · « **Reply #18 on:** February 01, 2016, 11:18:40 AM »

Kapitan Andrea and I are back in gear! The move went well, and we're adapting to our new lives in a new home and anew place. I won't say it was entirely easy, but we've persevered. I was able to get back to the bench in early December, but this is the first time I've been ready to post again- read on!

FAAMAN · « **Reply #19 on:** February 01, 2016, 06:32:04 PM »

Wow! Amazing as usual :) :)

Old Wombat · « **Reply #20 on:** February 01, 2016, 09:05:17 PM »

Kapitan Andrea & chukw serve up another modelling Master-class!

The ex-RAN FAA members approve!

DFZ · « **Reply #21 on:** February 04, 2016, 08:18:01 AM »

The level of detail... wow... EXCELLENT!!

chukw · « **Reply #22 on:** February 06, 2016, 02:32:43 AM »

Thanks, my friends!

Side notes: Those grooves in the wing were for a fiber-optic lit version that was never produced. That also explains some odd moldings on the two fuselage bulkheads. There is also a bulkhead to close off the cockpit front included on the clear parts sprue! It's not mentioned in the instructions- a friend pointed that out to me.

Cheers!
chuk

chukw · « **Reply #23 on:** February 17, 2016, 03:18:20 AM »

Sneak peek:

CSMO · « **Reply #24 on:** February 17, 2016, 04:52:54 AM »

I wonder if her G-string matches her G-suit outfit? Don't tell me. Somethings are better left to the imagination. A filthy mind is a terrible thing to waste.

Your ladies are always good for a smile on a ho-hum day.

Keep up the good work, sir!

Adios, Larry.

arkon · « **Reply #25 on:** February 17, 2016, 09:46:48 AM »

I believe you once had a book for sale , is there any information on where to find it sir?

Old Wombat · « **Reply #26 on:** February 17, 2016, 08:55:29 PM »

Quote from: arkon on February 17, 2016, 09:46:48 AM

I believe you once had a book for sale , is there any information on where to find it sir?

Seconded! I didn't get the opportunity 1st time for various reasons, despite my good intentions. $:-\$

chukw · « **Reply #27 on:** February 18, 2016, 01:23:20 AM »

Thanks, guys! Larry, need you even ask?

I still have plenty of books- and I'll do sketch in your copy. http://www.storenvy.com/stores/472326-chukstuff

NOTE: Overseas (from me) buyers- don't let the high postage rate put you off- it's the max for shipping to Dubai. I had to put something in! Look at the general shipping for France, Austrailia, Japan, etc listed. Much better!

Cheers!
chuk

FAAMAN · « **Reply #28 on:** February 18, 2016, 01:55:02 PM »

Love to get the book, WIFEU (SWMBO) does not agree

chukw · « **Reply #29 on:** February 19, 2016, 01:30:03 AM »

Just tell her my art is saucy- but never dirty!

chukw · « **Reply #30 on:** March 25, 2016, 06:03:40 AM »

Life after a big move throws a lot of surprises at you, along with all of life's regular highs and lows. Just in modeling I've gone through periods of not even looking at the bench, to hours of studying the subject and subsequent squalls of charging ahead and then banging my against the table. It's been about 7 weeks since my last post, so here's a long one for you. Forgive me if I reiterate some basics- my original mission remains to instruct and entertain, and help grow our beloved hobby. Cheers!

--

DFZ · « **Reply #31 on:** March 25, 2016, 08:02:41 AM »

Your mission in modeling is a noble one, and i think it's being accomplished! Thank you for sharing your knowledge!

:)

Zen

FAAMAN · « **Reply #32 on:** March 25, 2016, 09:11:10 AM »

As always, superb workmanship

Old Wombat · « **Reply #33 on:** March 28, 2016, 12:42:29 AM »

Awesome build!

Awesome tips!

Awesome view!

Some people just have it all!

chukw · « **Reply #34 on:** March 29, 2016, 04:17:59 AM »

Thanks, gents! It's been kindly pointed out to me that GS Mr Color Leveling Thinner, Tamiya yellow cap and regular thinners and even isopropyl rubbing alcohol will work on Mr Surfacer with less or no damage to styrene- great tips!

Bonus lady art:

FAAMAN · « **Reply #35 on:** March 29, 2016, 08:27:49 AM »

OMG

chukw · « **Reply #36 on:** May 23, 2016, 09:29:01 AM »

Thanks, FAAMAN!

Progress! Here's the latest from my bench- enjoy! It may be a while before the next update- I've got another project that will sideline the LanceR for a bit. I'll let you know more about that as soon as I can- cheers!

elmayerle · « **Reply #37 on:** May 23, 2016, 11:52:33 AM »

Those "rude little fellas" look like IRCM units (Infra-Red Counter-Measures) to jam IR-guided SAMs and AAMs. Just about every military flying machine has them these days (well, maybe not trainers, but...). Truly gorgeous and inspiring work.

FAAMAN · « **Reply #38 on:** May 23, 2016, 01:25:35 PM »

Eye wateringly brilliant installment :) :) Us mere mortals will be taking notes, and notes, and saving pics . . . . .

Old Wombat · « **Reply #39 on:** May 23, 2016, 01:26:34 PM »

Yummy! Very Yummy!

Wha'? The plane? Oh!

Awesome stuff, as usual Chuk!

GTX_Admin · « **Reply #40 on:** May 24, 2016, 04:29:10 AM »

Quote from: elmayerle on May 23, 2016, 11:52:33 AM

Those "rude little fellas" look like IRCM units (Infra-Red Counter-Measures) to jam IR-guided SAMs and AAMs. Just about every military flying machine has them these days (well, maybe not trainers, but...). Truly gorgeous and inspiring work.

I suspect they are actually part of the Elisra SPS-20 warning system fitted to the LanceRs.

Brian da Basher · « **Reply #41 on:** May 25, 2016, 03:31:07 AM »

To paraphrase an old saying, "I may not know much about modern jets, but I know what I like!"

And I really like where this baby is going, Chuk! Wish I had but 1/10th your patience & skill for detailing, it sure is a treat to catch the play-by-play!

Can't wait to see the Romanian markings! Far too few of them 'round these parts...

Brian da Basher

chukw · « **Reply #42 on:** May 29, 2016, 01:17:14 AM »

Many thanks, my friends! I appreciate the info on thoses protuberances- as for modern stuff, like John Snow I know nothing. Cheers to all- and to those I met at the Seattle show (and you know who you are

- extra cheers!

chukw · « **Reply #43 on:** May 29, 2016, 01:33:55 AM »

Oh, and if you want to do this in 1/32:

Jeffry Fontaine · « **Reply #44 on:** May 29, 2016, 07:03:27 AM »

G-Suit Corsets should be a "thing" :)

FAAMAN · « **Reply #45 on:** May 29, 2016, 07:38:05 AM »

Oh dear!! I can feel a 1/32 purchase coming on

Now what do i tell the WIFEU $:-\$

chukw · « **Reply #46 on:** June 21, 2016, 05:33:01 AM »

Thanks to you, Jeffry and Darryl! I'm still waiting for my "mystery project", so I've pressed on with the LanceR. You do a lot with scrap wire, brass tube and styrene if you put your mind to it!

Old Wombat · « **Reply #47 on:** June 21, 2016, 01:35:34 PM »

Nice, _um ... legs!

No way am I even going to try to compete with your levels of detail, mate - I'd go crazy! ... -er! $:-\$

FAAMAN · « **Reply #48 on:** June 21, 2016, 02:51:42 PM »

Fantastic work/detailing lesson

GTX_Admin · « **Reply #49 on:** June 22, 2016, 03:38:55 AM »

chukw · « **Reply #50 on:** December 02, 2016, 10:22:20 AM »

Thanks, guys! Better late than never, I hope! I've been busy with life and stuff- including a build article for TMMI. I'll return to this build, though- I hate to leave things unfinished!

It's also a bit late in the day, but here's a piece for all our Romanian friends!

Modelling_Mushi · « **Reply #51 on:** December 04, 2016, 07:57:24 AM »

Good to see you Chuck, been missing your builds.

And better late than never.

Ciao


Swords to Plowshares GB Now Open!!

News:

Author Topic: NATO's LanceR- a Romanian MiG 21MF in 1/48 (Read 16938 times)