Author Topic: The 2015/16 Clear Your Work Bench Group Build  (Read 20897 times)

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
The 2015/16 Clear Your Work Bench Group Build
« on: November 22, 2015, 06:09:14 AM »
The 2015/16 Clear Your Work Bench Group Build

Coming Soon
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #1 on: November 22, 2015, 09:07:57 AM »
Yipee!

Offline arkon

  • Paper Building Maestro
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #2 on: November 22, 2015, 09:11:28 AM »
I think the workbench photo you used GTX is not one from a member of this forum, looks way to clean. Not enough unbuilt, started projects.😜
the paper gods demand sacrifice

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #3 on: November 22, 2015, 11:47:59 AM »
certainly not Greg's work bench either as all of the kits are in the "wrong scale" :)
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #4 on: November 22, 2015, 12:59:52 PM »
I think the workbench photo you used GTX is not one from a member of this forum, looks way to clean. Not enough unbuilt, started projects.😜

Great insight. :)   Could not have said it better.
Like to clear off even one of bench's three unfinished kitbashes.

« Last Edit: November 22, 2015, 01:08:28 PM by finsrin »

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #5 on: November 22, 2015, 01:15:29 PM »
Oh crap this could be bad. I've got a bunch of projects gathering dust, the Jetty-Ju, the tri-motor Betty VIP transport, the Avro Luton, the von Braun inspired airliner...

I should do this by the numbers, oldest first. I've got enough half-starts to be comfortably set for the CYWB GB in 2017, 2018, 2019 and beyond.

Brian da Basher

Offline Kerick

  • Reportedly finished with a stripper...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #6 on: November 22, 2015, 02:15:10 PM »
Anything I build would qualify, it always takes so long.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #7 on: November 22, 2015, 03:51:58 PM »
Thatz a nice work bench.  Can even see surface material, its color and such.
In round numbers, mine is 90% cluttered/covered.  Doing cleaning now (entire room).  Maybe can participate in this GB.

Offline Claymore

  • It's all done with smoke and mirrors!
  • Alt Hist AFV guy with a thing for Bradley turrets
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #8 on: November 22, 2015, 11:35:11 PM »
Hopefully, I'll get something in for this one but this year has been a bit of a washout on the modelling front.  So many crappy things have happened this year that, were I not such an optimist, I would suspect that some minor (or major) deity has it in for me!  :(

Pass the razor saw, there is work to be done!

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #9 on: November 23, 2015, 03:06:47 AM »
I could have used this image:



But that would have had you lot rolling around the floor laughing...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #10 on: November 23, 2015, 03:11:21 AM »
I could have used this image:



But that would have had you lot rolling around the floor laughing...


This so wrong in so many ways .....
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #11 on: November 23, 2015, 03:51:06 AM »
Looks like a "staged picture" done by non model builders.  Idealistic book-magazine kinda picture.
Correct type items here-n-there,,,,,,,  but looking oh so staged.
Even after multi-mandays of clean up.  My bench-room won't come out looking like that.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #12 on: November 23, 2015, 04:31:16 AM »
What dates are we looking at ?

Online raafif

  • Is formally accused of doing nasty things to DC-3s...and officially our first whiffing zombie
  • Whiffing Insane
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #13 on: November 23, 2015, 05:05:43 AM »
Clear the Workbench ?????  Damn Impossible !!


What dates are we looking at ?

2015 to 2025 ?

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #14 on: November 23, 2015, 05:51:41 AM »
What dates are we looking at ?

2015 to 2025 ?

2025? Is it too early to ask for an extension yet?
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #15 on: November 23, 2015, 06:51:57 AM »

Offline Kerick

  • Reportedly finished with a stripper...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #16 on: November 23, 2015, 09:02:19 AM »
I could have used this image:



But that would have had you lot rolling around the floor laughing...


This so wrong in so many ways .....


A clean desk/workbench is the sign of a sick mind!

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #17 on: November 23, 2015, 09:11:09 AM »
I could have used this image:



But that would have had you lot rolling around the floor laughing...


This so wrong in so many ways .....


A clean desk/workbench is the sign of a sick mind!


The more I look at the picture the more I think "Adobe Photoshop" was involved.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Kerick

  • Reportedly finished with a stripper...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #18 on: November 23, 2015, 09:13:46 AM »
Nice design if one has the woodworking skills.

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #19 on: November 23, 2015, 09:41:12 AM »
I actually bought a roll top desk to use for modelling a couple of years back to protect WIPs from toddlers, pets and careless spouse, etc.  The issue is the sides mean it fills up with crap very quick meaning I need another bench next to it to more stuff to or work on.  Worse yet is now the spare room it is in has a double bed instead of the single (I suggested a sofa bed or Futon but was interstate when the bed was bought), as well as a corner computer desk, and I can't get to either desk without pulling the bed out then pushing it up against the built-in robe doors. :(

Why a double bed?  Well a queen, let alone a king, wouldn't fit and my step daughter needs it apparently, for when she visits for a week, once or twice a year. :S

Offline jcf

  • Global Moderator
  • Turn that Gila-copter down!
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #20 on: November 23, 2015, 12:20:46 PM »
Clear Your Bench Build?! More like clear your bench backhoe.  :-X



Yes, that's a toilet lid, don't ask.  :-\
“Conspiracy theory’s got to be simple.
Sense doesn’t come into it. People are
more scared of how complicated shit
actually is than they ever are about
whatever’s supposed to be behind the
conspiracy.”
-The Peripheral, William Gibson 2014

Offline Kerick

  • Reportedly finished with a stripper...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #21 on: November 23, 2015, 12:20:57 PM »
I feel your pain. We have to have a "guest bedroom" for when one of my kids stays overnight. Like you said, once or twice a year. And my youngest is in college so she is gone most of the time except when she comes home for a weekend. And she still has her room. I suggested a combo library, office, lab and model room. I got the eyeroll. ::)

Offline Kerick

  • Reportedly finished with a stripper...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #22 on: November 23, 2015, 12:22:46 PM »
Clear Your Bench Build?! More like clear your bench backhoe.  :-X



Yes, that's a toilet lid, don't ask.  :-\


The sign of a truly creative mind!

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #23 on: November 23, 2015, 12:30:05 PM »
The lighting is very good. And I see a frog overseeing all amphibious activities.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #24 on: November 23, 2015, 07:32:03 PM »
Here is another bad example of where and how to build models:



This is part of a 1/200 Arizona build thread.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #25 on: November 23, 2015, 08:09:47 PM »
OOH MY  :icon_surprised: have same kit ordered to build as 1/72 gun boat.  Super picture :)

Offline LemonJello

  • MARPAT Master
  • Member number 100...WooHoo!!!
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #26 on: November 23, 2015, 09:20:58 PM »

I could have used this image:





What scale is this model? 1/32? 1/24? It's obviously not real...though as neat as it is it does count as a "What If"...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #27 on: November 24, 2015, 03:25:10 AM »
What dates are we looking at ?

Group Build dates will be 1 Dec - 31 Jan 2016 (with possible extension).  Anything is allowed to be entered so long as you have already started and have an intention to finish...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Full Member
  • Stylishly late...because he was reading comics
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #28 on: November 24, 2015, 03:27:08 AM »
What dates are we looking at ?

Group Build dates will be 1 Dec - 31 Jan 2016 (with possible extension).  Anything is allowed to be entered so long as you have already started and have an intention to finish...

So many options... Doh!
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #29 on: November 24, 2015, 03:44:01 AM »
What dates are we looking at ?

Group Build dates will be 1 Dec - 31 Jan 2016 2026 (with possible extension).  Anything is allowed to be entered so long as you have already started and have an intention to finish...


 :o
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #30 on: November 24, 2015, 06:01:50 AM »
What dates are we looking at ?

Group Build dates will be 1 Dec - 31 Jan 2016 2026 (with possible extension).  Anything is allowed to be entered so long as you have already started and have an intention to finish...


 :o
GB must end before BTS goes through Y3K transition.  No way around that.

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #31 on: November 24, 2015, 07:15:29 AM »
I'm in. I have at least three to qualify. And I'll get a bench photo later to share!
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #32 on: November 24, 2015, 08:47:43 AM »
I'd post a picture of my work bench, but I think it would blanch even the hardiest of the BTS crowd. Right now I have about a hand's worth of clear real estate. Maybe less.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #33 on: November 24, 2015, 09:13:13 AM »
I'd post a picture of my work bench, but I think it would blanch even the hardiest of the BTS crowd. Right now I have about a hand's worth of clear real estate. Maybe less.
Really honestly "hand's worth of clear real estate" is to small.
Last couple kitbashing cycles started at ~70% clear bench.  Ending at 8.5"x11" printer paper page as working area.  Does the job cept retaining two pages of work surface would be way better.

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #34 on: November 25, 2015, 05:59:56 PM »
After Jons photo I had another look at my garage.  The previous owner built 80% of one half of the double garage into a closed off, air-conditioned hobby room that has been full of "Stuff" ever since we moved in almost three years ago.  "Stufff" currently includes yet to be unpacked moving boxes, garden tools, camping gear, kids bikes and part of my stash and has previously stored my motorbike prior to it relocating to my sisters house to avoid temptation following my spinal surgery. 

Anyway the long term plan has always been to pull it down and use it for the car, but as we haven't done this already and I don't know when, if ever, so today I gingerly broached the suggestion with SWMBO that we could actually clear out some junk and use it as a hobby room for modelling, Lego and puzzles.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #35 on: November 25, 2015, 07:18:01 PM »
Volkodav - sure sounds good, hope it works out for you.

Making progress here.  Estimate 1/3 of 70s green shag carpet is now visible.  Encountered many wayward decals during dig down to carpet level.

Noticed a relativity phenomenon: When clutter is maximum and deep with only about 5% of green shag carpet visible, progress is super slow because there is no maneuvering room.  One must deal with every little item encountered (wheel, prop, decal, canopy, stand, receipt, etc) though you are unable to deposit it in proper location across room because you can't get there due to depth of styrene related clutter.  Most goes to designated temporary holding boxes in hallway, some to trash can.  Once a carpethead is established progress goes a bit quicker.  There comes point at about 25% carpethead when you have decent maneuvering room and dealing with each item is relatively easier/quicker than at first.  With this milestone reached relativity of difficulty (time involved) dealing with each item diminishes.

Offline LemonJello

  • MARPAT Master
  • Member number 100...WooHoo!!!
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #36 on: November 25, 2015, 09:20:22 PM »
Noticed a relativity phenomenon: When clutter is maximum and deep with only about 5% of green shag carpet visible, progress is super slow because there is no maneuvering room.  One must deal with every little item encountered (wheel, prop, decal, canopy, stand, receipt, etc) though you are unable to deposit it in proper location across room because you can't get there due to depth of styrene related clutter.  Most goes to designated temporary holding boxes in hallway, some to trash can.  Once a carpethead is established progress goes a bit quicker.  There comes point at about 25% carpethead when you have decent maneuvering room and dealing with each item is relatively easier/quicker than at first.  With this milestone reached relativity of difficulty (time involved) dealing with each item diminishes.

Finsrin, this is what I call an "Okinawa Field Day" from my time in the Green Machine...when my shed or garage becomes overrun with clutter everything comes out - down to the bare walls and floor.  Then I start putting things back into the area - shelves followed by bins and boxes to go on the shelves.  As I find things that are no longer needed, useful or wanted they go into the trash or are bagged for the thrift store donation.  End result is a clean and organized space, which lasts approximately a nano-second before the clutter counter-attacks.

Offline jcf

  • Global Moderator
  • Turn that Gila-copter down!
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #37 on: November 26, 2015, 01:32:30 AM »
After Jons photo I had another look at my garage.  The previous owner built 80% of one half of the double garage into a closed off, air-conditioned hobby room that has been full of "Stuff" ever since we moved in almost three years ago.  "Stufff" currently includes yet to be unpacked moving boxes, garden tools, camping gear, kids bikes and part of my stash and has previously stored my motorbike prior to it relocating to my sisters house to avoid temptation following my spinal surgery. 

Anyway the long term plan has always been to pull it down and use it for the car, but as we haven't done this already and I don't know when, if ever, so today I gingerly broached the suggestion with SWMBO that we could actually clear out some junk and use it as a hobby room for modelling, Lego and puzzles.

Yep, my half of the garage is my inside shop/art/hobby area (we have a covered outside area I use during the
warm months for carpentry, metalwork etc.), the other half is for the wife's car. Mine lives outside on the driveway.
Works fairly well when it's organized.  :-X
“Conspiracy theory’s got to be simple.
Sense doesn’t come into it. People are
more scared of how complicated shit
actually is than they ever are about
whatever’s supposed to be behind the
conspiracy.”
-The Peripheral, William Gibson 2014

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #38 on: November 26, 2015, 04:12:02 AM »
Continuing to dig, clear, sort, and store items to hopefully be ready for GB.
One thing done right years ago when setting room was to designate bins for parts.   See attached picture of storage bins.
Actually have places to put most of parts being found.  Cleared path to bins, now can use them during clean up.
Doing this may work for you.

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #39 on: November 26, 2015, 12:00:40 PM »
Was planning to check out shelving and work benches today but was reminded it was school uniform fitting time, oh joy.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #40 on: November 27, 2015, 02:51:16 AM »

One thing done right years ago when setting room was to designate bins for parts.   See attached picture of storage bins.


Bill, can I have you come down here to sort and label my stuff...please!!!
« Last Edit: November 27, 2015, 02:56:03 AM by GTX_Admin »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Reportedly finished with a stripper...
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #41 on: November 27, 2015, 07:51:49 AM »

One thing done right years ago when setting room was to designate bins for parts.   See attached picture of storage bins.


Bill, can I have you come down here to sort and label my stuff...please!!!

You could make a business out of this!!!

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #42 on: November 27, 2015, 09:54:48 AM »
Here's my current disaster area:



It's usually clear up to the paint area. As soon as I finish a couple of the existing projects, it'll get cleaned up and ready to walk my work area down down to the edge again with my next project.

The Glencoe/Strombecker space station was built, sanded (and sanded...) and polished some 15 years ago. I just added the thin styrene rod (strings looked awful). Hopefully it won't take 15 years to finish it, although I dinged a couple of the rods.

The Earth vs. The Flying Saucers is finished, the Curran should be finished this week.

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #43 on: November 27, 2015, 10:25:26 AM »
Here's my current disaster area:

It's usually clear up to the paint area. As soon as I finish a couple of the existing projects, it'll get cleaned up and ready to walk my work area down down to the edge again with my next project.

The Glencoe/Strombecker space station was built, sanded (and sanded...) and polished some 15 years ago. I just added the thin styrene rod (strings looked awful). Hopefully it won't take 15 years to finish it, although I dinged a couple of the rods.

The Earth vs. The Flying Saucers is finished, the Curran should be finished this week.
Whole area has a normal honest use aura about it !

Offline ysi_maniac

  • I will die understanding not this world
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #44 on: December 04, 2015, 10:05:45 PM »
Fortunately we do not show stash.  :o :o

Offline Steve Blazo

  • The man likes white plastic...weird.
    • flickr
Re: The 2015/16 Clear Your Work Bench Group Build
« Reply #45 on: December 20, 2015, 10:40:58 AM »
My current work bench.  I clean it at the start of each project. Just completed Meng's BMPT and going to start Meng's D9R bulldozer. The wife has given her blessings for me to build a real work bench after Chistmas.
As I walk through the valley of death,
I have no fear, because I am the meanest mother*ucker in the whole valley.
- Gen. George S. Patton