Author Topic: RW materials question for the Whiffverse:  (Read 16471 times)

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
RW materials question for the Whiffverse:
« on: January 04, 2014, 08:18:51 AM »
The question: at what speed is it better to use titanium instead to aluminum in an airframe?  The follow-on question:  is it possible to have the high friction areas be titanium instead of aluminum on airframes, presuming an existing platform is being subjected to modifications?

Yes, this is a recce Phantom question. :)

Greg and I was chatting at the Spruce Goose Museum last year and he told of a certain high speed run that ruined some newly applied paint.   And there are rumors of some very high speed events with Syrian MiG-25s and Israeli Phantoms.   It kicked my OCD/AMS (aka imagination) in to gear.  :D.   And the Academy thin wing Phantom showed up today.  Mmmmm!  Thus the questions.

Thanks in advance,
Daryl j.
kwyxdxLg5T

Offline Cliffy B

  • Ship Whiffer Extraordinaire...master of Beyond Visual Range Modelling
  • Its ZOTT!!!
    • My Artwork
Re: RW materials question for the Whiffverse:
« Reply #1 on: January 04, 2014, 08:56:22 AM »
Keep in mind I'm not a metallurgist or aeronautical engineer but just considering the melting points of the two metals in question I'd go with titanium in the high heat areas and definitely not aluminum.  Aluminum will melt at around 1,200 degrees Fahrenheit and titanium at over 3,000.  If you can carry the extra weight, use the titanium.

Again, just the opinion of whiffer and Google  ;D
"Radials growl, inlines purr, jets blow!"  -Anonymous

"Helos don't fly.  They vibrate so violently that the ground rejects them."  -Tom Clancy

"If all else fails, call in an air strike."  -Anonymous

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #2 on: January 04, 2014, 09:18:57 AM »
I'm thinking in terms of heat resistance, yes, but also things like coefficients of expansion, stiffness compatibilties, galvanic corrosion resistance, etc.   I'm utterly oblivious.   :-[

As little time as I have to model any more and given that I prefer a Near-RW Whifbuild, having something reasonably plausible it is the goal.   Ah, the things I choose to torment myself with!  ;D

kwyxdxLg5T

Offline Cliffy B

  • Ship Whiffer Extraordinaire...master of Beyond Visual Range Modelling
  • Its ZOTT!!!
    • My Artwork
Re: RW materials question for the Whiffverse:
« Reply #3 on: January 04, 2014, 09:19:59 AM »
Since it'll be high heat, it'll probably be unpainted right?  Just paint various natural metal shades and call it a special "alloy".  See, problem solved  ;D
"Radials growl, inlines purr, jets blow!"  -Anonymous

"Helos don't fly.  They vibrate so violently that the ground rejects them."  -Tom Clancy

"If all else fails, call in an air strike."  -Anonymous

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: RW materials question for the Whiffverse:
« Reply #4 on: January 04, 2014, 03:22:20 PM »
Biggest problem in substituting titanium for aluminum is that you suddenly have all sorts of galvanic corrosion potentials that you didn't have before and you may need special sealants and/or surface finishes.  That's something I deal with a fair bit, given that I'm currently working with structure around propulsion systems.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #5 on: January 04, 2014, 04:49:12 PM »
Thought so.   Thanks.
kwyxdxLg5T

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #6 on: January 04, 2014, 04:55:41 PM »
Interestingly though plastics reinforced with carbon fibers can induce galvanic corrosion in attached aluminum components.  This is one of the reasons why Titanium is finding greater application in platforms like the F-35 and 787.  Titanium does not suffer to the same extent.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #7 on: January 04, 2014, 05:07:40 PM »
Well how about that.   That was the next question.

Going back to all aluminum, are there ceramic coatings that adequately deflect/absorb heat that can be used on leading edges and other high heat areas?   
kwyxdxLg5T

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: RW materials question for the Whiffverse:
« Reply #8 on: January 04, 2014, 11:28:39 PM »
Some time ago I was reading an article in a motorcycle magazine, it was about futuristic MotoGP engines that would rev to over 25,000 rpm (or even higher).  The plan was to use ceramic pistons, valves, heads and cylinder liners because of the heat generated while operating at these elevated rpms.  I don't know what ceramic was involved though --

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #9 on: January 05, 2014, 03:18:06 AM »
Another option (rather than simply change materials) is to introduce an active cooling system for the affected parts, probably using fuel as a coolant.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #10 on: January 05, 2014, 03:22:00 AM »
It might depend upon the intended operational profile.  If only expecting to experience short term high temperatures, one might just as easily utilise an ablative coating to the affected areas - this could be replaced during BF/AF maintenance perhaps.  If however one wanted to deal with far longer term operations, one could consider some of the coatings utilised in gas turbine engines.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #11 on: January 05, 2014, 04:05:26 AM »
Useful info.    :)

Thanks!

Where I hope to take this is a Photo Phantom variant with shorter high speed dashes available to it say, for instance, the higher Mach 2's. Alternative intakes, materials where appropriate,  recce setup, and nation of use.     Kit of choice is the Academy F-4B for the thin wing.   Eventually.
kwyxdxLg5T

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #12 on: January 05, 2014, 04:24:04 AM »
I assume something in the '60s/'70s era?
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #13 on: January 05, 2014, 04:35:48 AM »
Speaking of ablative coatings on aircraft, the X-15 is probably the most extreme example - click on image for more details:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #14 on: January 05, 2014, 04:51:33 AM »
Quote
I assume something in the '60s/'70s era?

Correct.
kwyxdxLg5T

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #15 on: January 05, 2014, 04:55:39 AM »
Then I would tend to simply go with some form of ablative coating that gets reapplied to key areas (e.g. nose, wing leading edges etc) before each flight envisioning high speed runs.  You might only need to do this if contemplating Mach3+ runs though).

BTW, another way to get the high speeds envisioned (and to have something visual on the model itself) would be to add in some sort of rocket booster - maybe as a belly attachment?
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: RW materials question for the Whiffverse:
« Reply #16 on: January 05, 2014, 11:22:20 AM »
Interestingly though plastics reinforced with carbon fibers can induce galvanic corrosion in attached aluminum components.  This is one of the reasons why Titanium is finding greater application in platforms like the F-35 and 787.  Titanium does not suffer to the same extent.
Oh, ghod, that's so true.  We have to take great care on finishes and sealants, of fasteners even, on the V-22.  When we release drawing/design packages, Materials and Processes is the first group to see them simply so that they can make sure we've got the finishes and sealants properly specified and applied.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: RW materials question for the Whiffverse:
« Reply #17 on: January 05, 2014, 11:50:10 AM »
BTW, another way to get the high speeds envisioned (and to have something visual on the model itself) would be to add in some sort of rocket booster - maybe as a belly attachment?
Perhaps in conformal units above the inlets?  That would take some careful alignment of the exhaust vectors, though, to keep things controllable.  An under fuselage pallet that would pick up the centerline hardpoints would work well, too, and the nozzle could nestle in-between the two J79 nozzles and look good there.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #18 on: January 05, 2014, 12:07:50 PM »
Good ideas all but I want a Mcdonnell Model 98 that gives the educated Phantom fan a double take...the one where they wonder how/why they missed knowing about that version.      ;D


And I wish I'd never tossed my Aurora F4H kit away when leaving for Undergrad.   :icon_nif:   


That all being said, wouldn't a belly rocket booster leave an easily seen exhaust plume?   Even if operating at 60-65,000 feet?
kwyxdxLg5T

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #19 on: January 05, 2014, 12:13:43 PM »
Not necessarily...it could be used in a boost-coast profile.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: RW materials question for the Whiffverse:
« Reply #20 on: January 05, 2014, 12:17:25 PM »
Depends on what you're using for fuel and oxidizer in the rocket.  You really can't help but leave some kind of trail, be it rocket exhaust or just condensation into contrails (if you should happen to burn LH2 & LOX).  You need to remember that your thrust vector needs to go through the aircraft cg, or reasonably close, for controllability reasons (they found this out on one ZELL test using a F-100, the test was delayed and the fully-loaded test aircraft sat in the sun all day; when they did launch, differential thermal expansion had moved the cg and the pilot had quite a wild ride).

Offline Cliffy B

  • Ship Whiffer Extraordinaire...master of Beyond Visual Range Modelling
  • Its ZOTT!!!
    • My Artwork
Re: RW materials question for the Whiffverse:
« Reply #21 on: January 05, 2014, 12:26:11 PM »
How about using the rocket booster to get up to speed only and not maintain the speed?  Top speed duration would be lower but you could pickle the booster before entering the photo run.  Although dropping anything from that speed might do more harm than good.  Any merit to the idea?
"Radials growl, inlines purr, jets blow!"  -Anonymous

"Helos don't fly.  They vibrate so violently that the ground rejects them."  -Tom Clancy

"If all else fails, call in an air strike."  -Anonymous

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: RW materials question for the Whiffverse:
« Reply #22 on: January 05, 2014, 12:29:05 PM »
Of course any discussion of high speed recon phantoms cannot go long without mention of the RF-4X:



All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: RW materials question for the Whiffverse:
« Reply #23 on: January 05, 2014, 12:48:38 PM »
Looking at that picture, I'm thinking that the rocket booster should be part of a conformal pallet that attaches to the fuselage underside with the nozzle between the existing J79 nozzles.  You need to position the exhaust nozzle such that the expansion cone of the exhaust does not impinge on the tail structure.

Offline Daryl J.

  • Assures us he rarely uses model glue in dentistry
Re: RW materials question for the Whiffverse:
« Reply #24 on: January 05, 2014, 01:27:48 PM »
What I have in mind is a pre RF-4x.
kwyxdxLg5T