Author Topic: FOUND  (Read 3596 times)

Offline Ramba

  • Newly Joined - Welcome me!
FOUND
« on: July 18, 2022, 10:28:35 PM »
Got the Meng T-72B3M kit with the KMT-8 so good to go.
« Last Edit: September 23, 2022, 11:15:55 PM by Ramba »

Offline Story

  • Nicht mein Zirkus, nicht meine Affen...
Re: LF Meng 1/35 BMPT Terminator KMT-8 Mine Plow parts
« Reply #1 on: July 19, 2022, 09:48:53 PM »
Dual purpose, bumping your post and leaving inspiration.
The name Orcs was meant as an insult, but I read that the Russians are embracing the name and calling it their own.

Offline Ramba

  • Newly Joined - Welcome me!
Re: LF Meng 1/35 BMPT Terminator KMT-8 Mine Plow parts
« Reply #2 on: July 19, 2022, 11:54:46 PM »
Dual purpose, bumping your post and leaving inspiration.
The name Orcs was meant as an insult, but I read that the Russians are embracing the name and calling it their own.


Thanks for the image. I saw that on Twitter. We need a 1/35 figure of the orc to add to the Terminator kit. I am building the Zvezda BMPT Terminator-2 kit and just primed it a few weeks ago. I don't need the KMT-8 mine plow for the Zvezda Terminator though. I have a Trumpeter T-80BVM that I want to add the KMT-8 to.

I want to do this T-80BVM that was captured by the Ukrainians. It has the KMT-8 and the 4S24 soft case ERA.


Here is the T-80BVM kit I have. I also have the ETA Ukrainian flag set and MiniArm 4S24 soft case ERA.


Meng is releasing a T-72B3 soon that also includes the KMT-8 mine plow but I already have the Trumpeter T-72B3 with 4S24 and grating cage on pre order so I don't need the Meng kit. I just need the KMT-8 mine plow and none available separately. Trumpeter makes a KMT-6 but it is different from the KMT-8.


Offline Story

  • Nicht mein Zirkus, nicht meine Affen...
Re: LF Meng 1/35 BMPT Terminator KMT-8 Mine Plow parts
« Reply #3 on: July 20, 2022, 05:12:12 AM »
https://www.thingiverse.com/thing:3722354

This guy is the right hulking bulk, give him a 14.5mm KPV with an ammo belt from the can on his back but .. spendy.
https://www.firstlegionltd.com/FLF6005.aspx

Or just this guy's head
https://www.thingiverse.com/thing:3722354

Offline Ramba

  • Newly Joined - Welcome me!
Re: LF Meng 1/35 BMPT Terminator KMT-8 Mine Plow parts
« Reply #4 on: July 20, 2022, 06:22:25 AM »
https://www.thingiverse.com/thing:3722354

This guy is the right hulking bulk, give him a 14.5mm KPV with an ammo belt from the can on his back but .. spendy.
https://www.firstlegionltd.com/FLF6005.aspx

Or just this guy's head
https://www.thingiverse.com/thing:3722354


Thanks for the links! Yeah, that middle link ORC would work. We would have to get it printed maybe 1/72 or 1/48 to fit on the front fender of the BMPT. Unfortunately I don't have a 3D printer.

If you have Facebook, check out this build of a Ukrainian T-80BVM. The builder added crew and one has a Viking helmet.
https://www.facebook.com/media/set/?vanity=100044534495217&set=a.592603652234113

The driver of this Ukrainian BMP-1 is wearing a Viking helmet. Again, unfortunately I don't have a 3D printer.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: LF Meng 1/35 BMPT Terminator KMT-8 Mine Plow parts
« Reply #5 on: July 20, 2022, 10:31:58 AM »
Giving the Russians a "cool" nickname like Orcs was a bad move; plain old goblins would have been better (Goblin up everywhere they can!).



PS: That looks like a Shrek figure, shouldn't be too difficult to do a reasonable facsimile in putty, if you really wanted to.
« Last Edit: July 20, 2022, 10:34:17 AM by Old Wombat »
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Ramba

  • Newly Joined - Welcome me!
Re: LF Meng 1/35 BMPT Terminator KMT-8 Mine Plow parts
« Reply #6 on: July 20, 2022, 10:10:33 PM »
Giving the Russians a "cool" nickname like Orcs was a bad move; plain old goblins would have been better (Goblin up everywhere they can!).



PS: That looks like a Shrek figure, shouldn't be too difficult to do a reasonable facsimile in putty, if you really wanted to.


If I was to sculpt something myself, it won't even look this good!  ;D ;D ;D ;D ;D ;D ;D ;D ;D


Original source.
https://www.classicfm.com/music-news/botched-spanish-palencia-sculpture-restoration/

Offline Ramba

  • Newly Joined - Welcome me!
Re: LF Meng 1/35 KMT-8 Mine Plow parts
« Reply #7 on: August 27, 2022, 01:15:03 AM »
Still looking if anyone has one to spare.


Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: LF Meng 1/35 KMT-8 Mine Plow parts
« Reply #8 on: August 27, 2022, 02:36:16 PM »
Sorry, mate, can't help you with that. :icon_crap:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."