Author Topic: Twinned Engines  (Read 9110 times)

Offline simmie

  • In need of an Avatar...or one will be chosen for h
Twinned Engines
« on: December 23, 2011, 10:09:29 AM »
OK, here's another mad idea.

Germany twinned the DB-603 as the DB-606, and the DB-605 as the DB-610.

America twinned the V-1710 as the V-3420.

How about a twinned Rolls Royce Merlin/Griffon???

A Twinned Bristol Centaurus???

Or if that isn't mad enough, a twinned Napier Sabre??

Once again, ideas and comments are always welcome.
Growing old is mandatory

Growing up is optional

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Twinned Engines
« Reply #1 on: December 23, 2011, 01:07:10 PM »
 :slow:
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: Twinned Engines
« Reply #2 on: December 23, 2011, 03:13:15 PM »
Or if that isn't mad enough, a twinned Napier Sabre??

So the plane can stand still and use the twin Napier Sabre to rotate the Earth around it?

Offline simmie

  • In need of an Avatar...or one will be chosen for h
Re: Twinned Engines
« Reply #3 on: December 23, 2011, 07:33:42 PM »
Well I did say that Sabre was "edge of madness" stuff!!

And I was suffering from Sleep Deprivation at the time.

After some more thought I have also considered this idea:-

As Rolls Royce Peregrine is to Rolls Royce Vulture

Then Rolls Royce Merlin/Griffon is to Merlin/Griffon X???

As for Sabre, turn them on their side and mount them sump to sump!!!

Growing old is mandatory

Growing up is optional

Re: Twinned Engines
« Reply #4 on: December 23, 2011, 07:49:23 PM »

Offline simmie

  • In need of an Avatar...or one will be chosen for h
Re: Twinned Engines
« Reply #5 on: December 23, 2011, 07:52:28 PM »
Ah yes I know what you mean there Empty old boy (as this is a forum for gentlemen!),  but I think I was looking at it from a BMW 803 point of view.  Again a case of "Late Night-itous".
Growing old is mandatory

Growing up is optional

Re: Twinned Engines
« Reply #6 on: December 23, 2011, 07:59:03 PM »
You would probably have severe difficulty cooling the aft-most cylinders (hence the Brabazon's somewhat bizarre installation) but you could always go for liquid-cooling like the Jumo 222 or Lycoming R-7755.

I've always liked the idea of a bypass duct (like modern turbofans) to get cooling air to the back rows.

Offline simmie

  • In need of an Avatar...or one will be chosen for h
Re: Twinned Engines
« Reply #7 on: December 25, 2011, 08:52:55 AM »
A thought occurs......

A De Havilland Mosquito with twinned Merlin in the fuselage driving a contra-prop on the nose!! a la He-119

I have a funny feeling that the centre engine bit is familiar, has someone done that already??

Or

A Spitifire with tandem Merlins for an attempt on the World Air Speed record
Growing old is mandatory

Growing up is optional

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Twinned Engines
« Reply #8 on: December 25, 2011, 01:01:15 PM »
Bah!  Let's get serious:  twinned Pratt & Whitney R-4360s...cooled with a fine mist of fire retardant...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline jcf

  • Global Moderator
  • Turn that Gila-copter down!
Re: Twinned Engines
« Reply #9 on: December 25, 2011, 03:20:53 PM »
The Vega Starliner had a coupled powerplant - two Menasco air-cooled inline 6 cylinders driving
a single prop.



The MC72 used the FIAT AS-6.


The Fairey Prince and Monarch were also true twinned engines.


The Napier-Halford Rapier, Dagger and Sabre were basically two flat engines mounted to a common gearcase, all three types had a separate crankshaft for each 'engine'. Ditto the R-R Eagle.

As to improving the cooling of the aft cylinders.

After problems with the original installation the cooling air for the Armstrong-Siddeley Deerhound radial was taken in at the front by an under engine scoop and was then conducted across the cylinders from back to front. The engine was test flown on an A S Whitley.

The D-H Gipsy 12/Gipsy King inverted V-12 air-cooled engines of the DH.92 Albatross were cooled by air
taken in at the leading edge of he wing that was then ducted forward over the cylinders to exit out the bottom of the cowling behind the propeller.
“Conspiracy theory’s got to be simple.
Sense doesn’t come into it. People are
more scared of how complicated shit
actually is than they ever are about
whatever’s supposed to be behind the
conspiracy.”
-The Peripheral, William Gibson 2014

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Twinned Engines
« Reply #10 on: December 26, 2011, 12:34:33 AM »
Not that mad!

Quote
A Twinned Bristol Centaurus???


http://www.flightglobal.com/airspace/media/civilaviation1949-2006cutaways/images/7871/bristol-brabazon-cutaway.jpg


Keep in mind that with this arrangement each engine only powered one propeller, same as the Double Mamba installed in the Gannet

Offline simmie

  • In need of an Avatar...or one will be chosen for h
Re: Twinned Engines
« Reply #11 on: January 03, 2012, 09:49:55 AM »
Well, due to a shortage of half-decent TV in the middle of the holiday period, insanity took hold and a started to work out the sizes for a variety of potential X engines.

I was forced to make some assumptions about heights of V-1710, Merlin, Griffon and Peregrine.

The last one was used to get a possible block height for Vulture (if some has the real numbers for that, let me know so I can make any corrections required.).  All of the numbers are highly sceptical as I haven't had the set squres out for quite a few years.

Height/width
Vulture - 958.33mm
Merlin X - 1123.33mm
Griffon X - 1095mm
X-3420 - 1065.83mm

I tried to work out sizes for a twinned Merlin and Griffon, but it just won't work out right.

All opinions welcome.
Growing old is mandatory

Growing up is optional