Beyond The Sprues
Current and Finished Projects => Physical Models => Land => Topic started by: kpnuts on April 25, 2015, 11:48:52 PM
-
Hi all well I know I've got lots on the go but Just had to add another, since the La Reale is on hold.
(http://i.imgur.com/YJ4Nchb.jpg)
(http://i.imgur.com/Y7Rov4x.jpg)
(http://i.imgur.com/QBuX5XB.jpg)
(http://i.imgur.com/ZSDTDrQ.jpg)
-
Hi all here is my progress so far.
(http://i.imgur.com/wzmiHxj.jpg)
(http://i.imgur.com/MCArbqr.jpg)
(http://i.imgur.com/FqxJenF.jpg)
(http://i.imgur.com/CNAIGfL.jpg)
(http://i.imgur.com/NFlHNqT.jpg)
(http://i.imgur.com/CsVrnEh.jpg)
(http://i.imgur.com/cJKm6wA.jpg)
(http://i.imgur.com/rHph6O2.jpg)
(http://i.imgur.com/g03hewR.jpg)
(http://i.imgur.com/FdWYjqY.jpg)
(http://i.imgur.com/SpdRr3W.jpg)
(http://i.imgur.com/Jfgb4kg.jpg)
-
Hi all well not a great experiment but at least I now know, now I just have to see if oven cleaner will take the gold leaf off and the acryllic size.
I've also learned you cant mask with just masking fluid.
(http://i.imgur.com/ZtyW556.jpg)
(http://i.imgur.com/uPcQfMI.jpg)
(http://i.imgur.com/dKPoMao.jpg)
(http://i.imgur.com/i2PWiVJ.jpg)
(http://i.imgur.com/Vxz2h4F.jpg)
(http://i.imgur.com/ngPPIF3.jpg)
(http://i.imgur.com/kmMrWNk.jpg)
(http://i.imgur.com/aZslpXs.jpg)
(http://i.imgur.com/Uk6qZiv.jpg)
-
Hi all well I'm learning lots with this build, oven cleaner takes the gold off ok but not the size, the size is still sticky so you could probably guild it again, if you try and sand it you get lots of little sticky particles all over the part that you cant get off white spirt wont touch it, but, eureka methylated spirits gets it off.
-
Hi all here is a small update on the VFR
(http://i.imgur.com/18SwgQj.jpg)
(http://i.imgur.com/GZnRgGg.jpg)
(http://i.imgur.com/ZQhvBBw.jpg)
(http://i.imgur.com/eYrREm1.jpg)
(http://i.imgur.com/mLyYhuE.jpg)
(http://i.imgur.com/xZXmnCY.jpg)
(http://i.imgur.com/iBqJBVA.jpg)
(http://i.imgur.com/ekvz6Fi.jpg)
(http://i.imgur.com/WZTVfLT.jpg)
-
Hi all a small update on this one.
(http://i.imgur.com/qHpv1Lo.jpg)
(http://i.imgur.com/CRk5QHH.jpg)
(http://i.imgur.com/ysQPlGi.jpg)
(http://i.imgur.com/ToZay6V.jpg)
(http://i.imgur.com/18pDlWl.jpg)
(http://i.imgur.com/6bwuiu0.jpg)
(http://i.imgur.com/xXa2Avl.jpg)
(http://i.imgur.com/YvsTxdp.jpg)
(http://i.imgur.com/lV51LJa.jpg)
(http://i.imgur.com/QxF3l2k.jpg)
-
wwwooowww
-
Hi all here is a small update on this one.
(http://i.imgur.com/gxv12F0.jpg)
(http://i.imgur.com/30HKuBp.jpg)
(http://i.imgur.com/lxxPRv4.jpg)
(http://i.imgur.com/qZf9igp.jpg)
(http://i.imgur.com/Nth1j0x.jpg)
(http://i.imgur.com/B8BLMEu.jpg)
-
Hi all here is another update on this one
(http://i.imgur.com/3JjDW3i.jpg)
(http://i.imgur.com/xA2lkZd.jpg)
(http://i.imgur.com/uCpPQvh.jpg)
(http://i.imgur.com/uMgY2NW.jpg)
(http://i.imgur.com/scj3lyX.jpg)
-
Damn, that looks real. beautiful job!!!
-
Thanks, I was hoping to finish this before my hols as a rat bike but I just dont think I will quite manage it.
(http://i.imgur.com/ui7SX4t.jpg)
(http://i.imgur.com/Fl3CTxH.jpg)
-
Hi all here is tonights progress on this one
(http://i.imgur.com/Bv54llD.jpg)
(http://i.imgur.com/ZbaUAIv.jpg)
(http://i.imgur.com/Xu1JfEB.jpg)
-
Hi all nearly finished this one.
(http://i.imgur.com/lqHnZOC.jpg)
(http://i.imgur.com/FcrfdYW.jpg)
(http://i.imgur.com/fb9YUlp.jpg)
(http://i.imgur.com/4sRR9aO.jpg)
(http://i.imgur.com/L5cjSlF.jpg)
-
That's a very realistic looking beauty.
-
Hi all well I'm calling this finished. I wanted it to look like it had been left out in a rain shower and the rain had dried on, so as an experiment I diluted matt varnish about 50% the used a tooth brush to flick rain drops on it, I quite like it and think it worked quite well.
(http://i.imgur.com/hIKa34n.jpg)
(http://i.imgur.com/OAqnb1d.jpg)
(http://i.imgur.com/5EO8K3C.jpg)
(http://i.imgur.com/m8c6lRn.jpg)
(http://i.imgur.com/QVgrchz.jpg)
(http://i.imgur.com/0c2UZZs.jpg)
(http://i.imgur.com/wm8WL0x.jpg)
(http://i.imgur.com/hFQEwN8.jpg)
(http://i.imgur.com/a7JVsOr.jpg)
and added to my growing collection
(http://i.imgur.com/smtOuZb.jpg)