Author Topic: 1/72 Commonwealth CA-11 Woomera  (Read 20184 times)

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #25 on: April 10, 2016, 11:02:34 AM »
Good news... :)

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #26 on: April 11, 2016, 04:39:57 AM »
Thanks Tophe! I rediscovered the Alternate History I wrote and that re-energised me. This weekend at the bench was all about tanks, so maybe next weekend the Woomera will get some attention.
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #27 on: April 11, 2016, 08:15:52 AM »
This weekend at the bench was all about tanks ....

Which is a good thing! 8)

Vacform isn't something I'm willing to tackle, so I wish you good fortune with the Woomera build & look forward to the results! :)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #28 on: May 20, 2016, 12:56:09 PM »
OK, it's been longer than I thought  :-[ ...I may get some Woomera time in this weekend. Stay tuned!
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #29 on: May 23, 2016, 04:48:38 AM »
I did! I did work on the Woomera!



As Matt Gilks' 1/48 version is now out I just want to get this one finished, rather than done as well as I could.



There is a lot of room for improvement with this kit as it is rather basic. The clear parts just aren't clear - they're textured in some way - so I gave them a good rub with soft cloth and then put them in place with Clearfix. Due to fit issues there's a lot of extra Clearfix used to make up the difference.

This weekend it'll be paint, decals (Ventura Publications' RNZAF Ventura markings) and weapons added  :)
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #30 on: May 23, 2016, 05:29:23 AM »
OK, it's been longer than I thought  ...

Swipe-copy-paste for any vacuform kit  :P  Glad that you're pressing on 'Zac  :)
Froglord: "... amphibious doom descends ... approach the alter and swear your allegiance to the swamp."

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Moderator
  • *
  • Hulk smash, Brian bash
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #31 on: May 24, 2016, 05:03:18 PM »
That's some mighty fine progress, Zac! It looks like your hard work on the canopy is going to really pay off!

Vac kits certainly aren't for the faint of heart.

Brian da Basher

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #32 on: May 25, 2016, 05:30:04 AM »
Thanks gents - Apo, it wasn't so much the parts prep as the filling/fairing of complex curves! The Woomera's a curvy girl and there was a lot to be done - particularly around the nacelles and barbettes.

Thank you Brian, it's been a labour of love...I've read these kits aren't the best.
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #33 on: May 25, 2016, 06:56:00 AM »
You're a better man than I am, Gunga Din taking on vacuform. I am still afraid to go near it.
« Last Edit: May 25, 2016, 07:01:31 AM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #34 on: May 25, 2016, 12:33:01 PM »
It's rewarding! Just give it a go, you might even like it  ??? That being said, these days some subjects previously served only by vacs are becoming available in more sensible media.
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Full Member
  • Stylishly late...because he was reading comics
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #35 on: May 27, 2016, 02:43:57 AM »
Keep up the fight!  :)
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #36 on: May 27, 2016, 04:33:47 AM »
The end is in sight! It'll be a bit rougher than I'd have liked but, with an example of the 1/48 kit aside with my name on it waiting for $$$, this one needs to be done!  >:(
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #37 on: May 27, 2016, 02:08:44 PM »
The new pictures are pleasant, thanks! :)

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #38 on: May 30, 2016, 04:54:35 AM »
Thanks Tophe! I painted it and applied decals yesterday but forgot to take any photos! Will do so and upload them during my lunchbreak today.

Just need to make some undercarriage doors and it'll be finished.
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #39 on: May 31, 2016, 04:18:39 AM »
Sorry my photos are later than I expected! Change in paint plans, too:



I'm away this weekend so it'll be another fortnight til she's done.
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #40 on: May 31, 2016, 11:13:16 AM »
Great result :-*

Offline apophenia

  • Perversely enjoys removing backgrounds.
  • Patterns? What patterns?
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #41 on: May 31, 2016, 11:17:38 AM »
Yep, looking good  :)
Froglord: "... amphibious doom descends ... approach the alter and swear your allegiance to the swamp."

Offline philp

  • Would gladly pay on Tuesday for a Bender today!
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #42 on: May 31, 2016, 11:22:12 AM »
She is looking nice and tidy Zac.

Who knows, maybe someday I too will build a vac.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #43 on: May 31, 2016, 05:39:52 PM »
Awesome job Zac. You have shown volumes of valour and are now victorious over vacuform.   :)
« Last Edit: May 31, 2016, 05:56:12 PM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #44 on: June 01, 2016, 02:25:31 AM »
Looking very fine. :)
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Moderator
  • *
  • Hulk smash, Brian bash
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #45 on: June 01, 2016, 04:02:41 AM »
Wow did that ever finish up a treat, Zac!

Excellent work on those canopies! The paintjob is easy on the eyes too!

Well done, Old Bean!

Brian da Basher

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #46 on: June 03, 2016, 05:32:03 AM »
Thanks all! It felt amazing to see it practically complete at last, after so many years of wanting one. Unfortunately we'll all have to wait a little longer for ultimate completion as I'm away this weekend at an NZ Warbirds open day/display practice day - oh no what a shame - but as Monday is a public holiday I should be able to finish it then. Not much left to do (scraping together serials and manufacturing gear doors are equally daunting prospects at this point).

I think the barbettes supplied in the kit are rather undersize but, again, the aim was to Just Get It Done. Plus I had nothing in my spares box that was large enough. I wanted to put in the complete .50cals but the barbettes were too small! I'm glad the barrels ended up sorta lined-up in the end.

I was thinking about using the USN three-tone scheme but, really, as an Australian-built aircraft that didn't make any sense. Instead I went with the RNZAF Hudson scheme, which was also worn by some P-40s. And I think it works nicely.

Brian - the photos, like your comments, are very flattering. In person the clear parts have a horrible texture to them that I don't think can be fixed (at least, not by someone of my skill level). I keep seeing mention on forums of certain paints resulting in an "orange peel" texture: that's what these "clear" parts have. Combined with the fact they are very brittle meant they are the absolute low-point of this otherwise very buildable kit. The dome-shaped part at rear was dented and cracked when the kit arrived so it's been replaced by a (I think) Lancaster turret.
« Last Edit: June 03, 2016, 05:34:20 AM by KiwiZac »
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Moderator
  • *
  • Hulk smash, Brian bash
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #47 on: June 04, 2016, 08:41:27 AM »
I always find vac canopies challenging myself, Zac and I'm not aware of any workable solution to that all-too-common pebbly texture except for complete replacement. I doubt those parts would hold up to micro-mesh and I can't see Future doing much good either. Maybe someone more knowledgeable will have an answer.

I really like the turret swap. Makes this baby look like she really means business!

Brian da Basher

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: 1/72 RNZAF CA-11 Woomera *COMPLETED!*
« Reply #48 on: June 11, 2016, 01:42:48 PM »
Following exhaustive trials by CAC the airframe was handed over to the RAAF in February 1944, but by this time the service was already impressed enough by the type’s performance to order 100 examples before the prototype was delivered. The RNZAF followed suit, placing an order for 50 CA-11As (S/N 1326-1375) which followed the RAAF machines off the Fisherman’s Bend production line. It was decided the type would be allocated service numbers in the NZ22xx block and serve with 25 and 31 Squadrons.

25 Squadron was first “off the rank” with ten aircraft initially delivered to their New Zealand base at Ardmore in early May 1944, replacing the Douglas SBD-4 and -5s they had used since the previous July. Although their crews showed some scepticism at being given twin-engine machines after using the single-engine Dauntless they soon came to appreciate the Woomera’s handling characteristics and far superior weapons load.


Woomera NZ2245 served with 1 (Bomber) OTU at Ohakea until October 1945, when it joined 25 Squadron

Squadron Leader TJM de Lange, commanding officer of the squadron, was interviewed about the type in a piece recorded by the National Film Unit prior to their return to Piva on the island of Bougainville. He told the interviewer that the RNZAF order for the Woomera showed “the ANZAC spirit at its fighting best” and heaped praise upon it. He quickly assumed “ownership” of NZ2231, the aircraft he would fly until the unit’s disbandment after the war.

The aircraft were ferried to Piva in flights of four, escorted by two Corsairs each, and on 18 June the last flight of four arrived making 24 on strength.

31 Squadron, commanded by Sqn Ldr M Wilkes, was the only other to be equipped with the type in the Pacific Theatre, receiving 18 to replace its complement of Grumman TBF Avengers in July 1944. Unlike 25 Sqn, 31’s aircraft were delivered directly to their Piva base from Australia by RAAF personnel and it was up to the men of 25 to familiarise their comrades with the type.


One of the features of the CA-11A was the dorsal turret at the rear of the "glasshouse" canopy, making for a formidable defensive arsenal

The remaining eight airframes were delivered to RNZAF Ohakea and temporarily placed in storage. Ideas were floated to re-form another squadron to use them (documents from the time suggest 44 Squadron was the prime candidate) but in the end it was decided they were more valuable as trainers, and were brought on line for use by No 1 (Bomber) Operational Training Unit.

Meantime the Woomeras of 25 Sqn were making a name for themselves thanks to a sterling combat record. Before VJ Day only two Woomeras were lost in action - NZ2204 (the crew bailing out over their own territory) and NZ2241 (crew POW) - and no crew members were KIA.

Likewise 31 Sqn was performing excellently, although tragedy struck on 9 February 1945 when a flight of four aircraft (NZ2201, 09, 12 and 20) was lost in bad weather. The wreckage was found two months later on a hillside, the aircraft apparently having become disoriented among a mountain range. Another two machines (NZ2214 on 12 September and NZ2230 two months later) were downed by ground fire, although one crew was saved. A landing accident also claimed NZ2207 on 4 November. A similar fate befell NZ2202 of 25Sqn after the same mission.

Back in New Zealand the eight Woomeras of 1 (Bomber) OTU provided invaluable training for future combat pilots, although two were lost in separate accidents – NZ2249 ditched off the Wanganui coast after double engine failure on 10 October 1944 and in April 1945 NZ2243 was damaged by shrapnel following weapons training and suffered landing gear failure upon its return to Ohakea.

When the war ended both combat squadrons were immediately ordered back to New Zealand, arriving at Ohakea before October 1. On that date 31Sqn was disbanded and most of its aircraft were flown to Rukuhia, near Hamilton, for open storage along with hundreds of other combat-veteran aircraft.


NZ2245 served with 25 Squadron until the type's retirement in 1950, when the role was taken over by DH.98 Mosquitos

25 Squadron was more lucky, swapping out seven of its more war-weary aircraft for the six surviving OTU machines and two formerly of 31. Back to its original strength of 24 Woomeras, the unit became part of the peacetime air force. The squadron lost four airframes in accidents over the next five years (NZ2222, ’42, ’44 and ’50) but thankfully without fatalities. The unit was finally disbanded in 1950, making way for 75 Squadron and its De Havilland Mosquitos.

The remaining 20 Woomeras were flown to join their 31 Sqn brethren at Rukuhia where, from about 1952, the process of scrapping the vast paddocks of fighters and bombers began. Unlike the roomier Lockheed Hudson, several of which were purchased from the Larsen scrapyard for use as garden sheds and chicken coops, the Woomeras found no such post-service use and most were scrapped. Two complete examples, NZ2217 and NZ2231, were purchased by aviation enthusiasts for preservation and NZ2245 was purchased by a farmer for use as a wind machine, minus its outer panels.

Volunteers at the Museum of Transport and Technology at Western Springs, Auckland, acquired NZ2217 from Larsen in 1958 and trucked the aircraft in several large pieces to its Meola Road site. Crudely reconstructed and placed on display in 1960, it was later removed for restoration and returned to the museum once more in 1996, fully refurbished and in its original WW2 paint scheme.


Wearing a generic RNZAF scheme to honour the Woomera crews lost in battle, NZ2245 is the sole airworthy ex-RNZAF example

The derelict NZ2245 was purchased from a Marton farmer in 1984 by a syndicate with the aim of restoring it to fly with wing outer panels recovered from Rukuhia. Ultimately it was decided these components were too corroded for flight and were traded to an Australian museum. In 1998 the remaining syndicate members sold the aircraft to private collector Tim Jackson who initially stored it until commissioning AvSpecs at Ardmore – not far from 25 Sqn’s original base at Seagrove – to undertake the restoration. The aircraft flew again in 2005 and, registered as ZK-XXV, regularly flies at airshows around the country.

The third surviving RNZAF Woomera, NZ2231, went through a succession of private owners until it was donated to the RNZAF Museum at Wigram, Christchurch. After a public “handing over” ceremony at the RNZAF’s 50th Anniversary Air Show in March 1987, the aircraft was put into restoration. Theodore de Lange visited the project shortly before his death in 1995, the event receiving TV and press coverage of the war hero being reunited with “his” aircraft to tie in with VJ Day commemorations. The restoration was completed in late 1997 and the aircraft rolled out in March 1998, returned to the colours and markings of de Lange. Shortly afterward NZ2231 was installed in the Museum and it is now displayed in a “bombing-up” diorama, with a lifelike mannequin of de Lange in the cockpit.

SERVICE OF RNZAF CA-11A WOOMERAS (serials NZ22xx)
25 Squadron (May 1944 - Oct 1945): 02’, 03, 04’, 16, 17, 18, 19, 21, 26, 27, 28, 29, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41’
31 Squadron (Jul 1944 – Oct 1945): 01”, 05, 06, 07”, 08, 09”, 10, 11, 12”, 13, 14’, 15, 20”, 22, 23, 24, 25, 30’
1 (Bomber) OTU (Aug 1944 – Oct 1945): 42, 43”, 44, 45, 46, 47, 48, 49”, 50
25 Squadron (Oct 1945 – May 1950): 02, 16, 17^, 21, 22”, 25, 31^, 42”, 44”, 45^, 47, 48, 50”
LEGEND:       ‘ - lost in action
         “ – lost in accident
         ^ - preserved
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Moderator
  • *
  • Hulk smash, Brian bash
Re: 1/72 Commonwealth CA-11 Woomera
« Reply #49 on: June 11, 2016, 05:33:44 PM »
Wow did that ever finish up beautifully, Zac!

I'm especially impressed with your work on the vac canopy, I always find those so challenging. It looks practically seamless on your CA-11! The awesome camo paint job and those wicked cool NZ markings really make this baby shine!

I doubt anything could embody that legendary NZ fighting spirit better!

Most excellent and the back story is a ripping good read too!

Brian da Basher