Author Topic: Flettner rotorship "Buckau" 1/? based on old SMER kit  (Read 2890 times)

Offline Artoor_K

  • On the run from Polish Rivet Counters...
  • Use the power of your dreams!
Flettner rotorship "Buckau" 1/? based on old SMER kit
« on: January 25, 2021, 04:08:32 AM »
Rotorships are mostly forgotten part of sailing (in last few years rotors were brought back to be kind of additional , not main propulsion).
As it is said on "Scientific American" page - In 1926 a cargo ship called the Buckau crossed the Atlantic sporting what looked like two tall smokestacks. But these towering cylinders were actually drawing power from the wind. Called Flettner rotors, they were a surprising new invention by German engineer Anton Flettner. When the wind was perpendicular to the ship's course, a motor spun the cylinders so their forward-facing sides turned in the same direction as the wind; this movement made air move faster across the front surface and slower behind, creating a pressure difference and pulling the ship forward. The rotating sails provided a net energy gainóbut before they could be widely adopted the Great Depression struck, followed by World War II. Like the electric car, the Flettner rotor would be abandoned for almost a century in favor of burning fossil fuel.

There was three rotorships then. Twin-rotor "Buckau" renamed later to "Baden-Baden", "Barbara" with three rotors and small yacht with one rotor owned by Flettner.

Because I simply love these strange ships then I just have to had one.
I bought old Cutty Sark from SMER/Mistercraft and I'll try to put "Buckau" soul in it :)

Here is photo of real "Buckau":

And here is donor kit:

I have to make some measurements , then I;ll be able to calculate scale.
Sickening, weakening
Don't let another somber pariah consume your soul
You need strengthening, toughening
It takes a bit of dark to rekindle the fire burning in you
Ignite the fire within you

Online Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: Flettner rotorship "Buckau" 1/? based on old SMER kit
« Reply #1 on: January 25, 2021, 04:28:17 AM »
I recall reading about that many years ago and often wondered why the technology was not pursued further.  Definitely looking forward to seeing your interpretation of this with the Cutty Sark.
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: Flettner rotorship "Buckau" 1/? based on old SMER kit
« Reply #2 on: January 25, 2021, 07:32:59 AM »
Very interested to see where this goes

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Flettner rotorship "Buckau" 1/? based on old SMER kit
« Reply #3 on: January 26, 2021, 02:00:09 AM »
Watching intently.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: Flettner rotorship "Buckau" 1/? based on old SMER kit
« Reply #4 on: January 26, 2021, 05:43:15 AM »
This will be interesting and good choice for the hull!

The Maersk Pelican uses two Fletner rotors: