Author Topic: Valom  (Read 39819 times)

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Valom
« Reply #50 on: May 04, 2018, 02:08:01 AM »
1/48 Britten Norman BN-2A announced:





So many ideas for this....
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Valom
« Reply #51 on: May 04, 2018, 07:11:03 AM »
It would be a great temptation to re-engine with suitable turboprops.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Valom
« Reply #52 on: May 05, 2018, 02:12:40 AM »
It would be a great temptation to re-engine with suitable turboprops.


Well there is the BN-2T variant powered by twin Allison 250s:


All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: Valom
« Reply #53 on: May 05, 2018, 02:26:15 AM »
Allison 250's or something equivalent in size and power would be the best choice, IMHO.  I suspect going with larger engines like the PT6A, TPE331, or Astazou would be a bit of "overkill".

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #54 on: October 26, 2018, 09:48:05 AM »
1/72 Scottish Aviation Twin Pioneer coming soon.



Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #55 on: August 16, 2019, 09:11:41 AM »
In the works. Blackburn Firebrand TF Mk.V 1/72

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Chris

  • An old friend and connoisseur of whiffing...
Re: Valom
« Reply #56 on: August 17, 2019, 04:54:47 PM »
Yes please  :smiley:

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #57 on: August 17, 2019, 08:31:51 PM »
Yes please  :smiley:

Moi Aussi. Now to WHIF it to a Mk. III and IV.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #58 on: September 30, 2019, 09:47:47 AM »


Valom has announced that their next 1/48 scale kit will be the Britten Norman BN-2 with markings for the RAF
”Next kit Britten Norman BN-2, RAF.”
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Valom
« Reply #59 on: September 30, 2019, 09:14:43 PM »
Yes please  :smiley:

Moi Aussi. Now to WHIF it to a Mk. III and IV.

I thought Valom had already done those, I'm got the Mk.II in the stash too.

EDIT; umm maybe not, I think I must have read sometime ago they were going to do the Centaurus versions in the future.
« Last Edit: September 30, 2019, 09:17:40 PM by kitnut617 »

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #60 on: October 21, 2019, 08:13:51 AM »
Final boxart.



Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Valom
« Reply #61 on: October 21, 2019, 08:27:14 AM »
Pretty much a RN Skyraider.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Valom
« Reply #62 on: October 21, 2019, 10:04:59 PM »
Pretty much a RN Skyraider.

Yup!  the TF Mk.IV went into service in September 1945, the two prototype Skyraiders flying only a couple of months before that.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Valom
« Reply #63 on: October 22, 2019, 01:49:35 AM »
Thanks guys, now I know what to do with my 1/48 Magna Models one.  Something in Korea or Vietnam and armed to the teeth as a CAS bird.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Dr. YoKai

  • Was in High School when mastadons roamed the plains...
  • A notorious curmudgeon who is partial to...hemp!
Re: Valom
« Reply #64 on: October 25, 2019, 02:45:35 AM »
Pretty much a RN Skyraider.

Just not nearly as good. I have loved the look of the Firebrand since I first ran across it, but it was never more than adequate to it's task.
Still. I will have to pick the Mk V up - and fake up a couple of 7.2 inch Burneys for the underwings. ;)

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Valom
« Reply #65 on: October 25, 2019, 05:26:59 AM »
What is a 7.2 Burney   ???

For my MB6 I made up a pair of 7.2" Triplex rockets

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Valom
« Reply #66 on: October 25, 2019, 07:09:31 AM »
Thanks guys, now I know what to do with my 1/48 Magna Models one.  Something in Korea or Vietnam and armed to the teeth as a CAS bird.

Now that's inspired!

Looking forward to seeing it one day,

Brian da Basher

Offline Volkodav

  • Counts rivits with his abacus...
  • Much older now...but procrastinating about it
Re: Valom
« Reply #67 on: October 25, 2019, 05:08:06 PM »
Pretty much a RN Skyraider.

Just not nearly as good. I have loved the look of the Firebrand since I first ran across it, but it was never more than adequate to it's task.
Still. I will have to pick the Mk V up - and fake up a couple of 7.2 inch Burneys for the underwings. ;)

Same here, love the look. love the concept, just spoilt a bit by the knowledge that it wasn't really up to scratch.  Similar feelings towards the Wyvern.

Offline Chris

  • An old friend and connoisseur of whiffing...
Re: Valom
« Reply #68 on: October 25, 2019, 08:41:43 PM »
What is a 7.2 Burney   ???


There was a proposal for a 7.2" Burney recoilless rifle to go with the 3.45" one.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: Valom
« Reply #69 on: October 25, 2019, 10:07:02 PM »
What is a 7.2 Burney   ???


There was a proposal for a 7.2" Burney recoilless rifle to go with the 3.45" one.

Thanks, I did a image search and found pics of those, just didn't think they would be mounted on an aircraft so wasn't sure. I guess it wouldn't be much different to those 'bazooka' type rp launchers the USAAF used during WWII
« Last Edit: October 25, 2019, 10:08:38 PM by kitnut617 »

Offline Dr. YoKai

  • Was in High School when mastadons roamed the plains...
  • A notorious curmudgeon who is partial to...hemp!
Re: Valom
« Reply #70 on: October 30, 2019, 07:49:53 AM »
 Sorry to be late in replying - but already ably answered, I see. :smiley:
 
  Although they seem never to have been prototyped and trialed, the first of the British Secrect Project books noted a number of early
jets intended to mount large automatic recoilless rifles in the wings. The 7.2 is pure fantasy - but I am prone to excess.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #71 on: November 02, 2019, 07:06:56 PM »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #72 on: December 16, 2019, 07:17:33 PM »


Valom has posted an image of the box art for the forthcoming 1/48 scale release of the Britten Norman BN-2B Islander in the colours of the Royal Danish Air Force
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #73 on: January 16, 2020, 06:55:24 AM »
1/72 Grumman J2F-3 Duck expected February 2020



https://www.hannants.co.uk/product/VAL72133
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: Valom
« Reply #74 on: January 16, 2020, 06:57:30 AM »
1/48 Britten-Norman BN-2A Islander (Philippine Navy, USCG) expected February 2020



https://www.hannants.co.uk/product/VAL48014
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...