Author Topic: OzMods Products (Read 34417 times)

by gregozmods » Fri Jun 15, 2012 6:40 pm

OzMods latest releases are repackagings of the 1/48 and 1/144 Caribou, and correction nacelles for the Italeri 1/72 C-130J Herc. Two other releases - 1/144 C-2A Greyhound conversion and 1/48 Vultee Vengeance correction - are due for release by September. A new 120 mm ANZAC figure - sculpted by Phil Walden - will also be released in the same time scale.

The 1/48 Caribou (vacs, resin, metal, decals) has been revised with decals for all five of the RAAF's "45 years service"/Retirement schemes, as well as one each for the USAF and Air America. Most of the production run was presold, and at the time of writing only a dozen kits remain.

The 1/144 Caribou (resin with metal and optional vac canopy) now comes with new screen printed decals: Covering the five aircraft for the RAAF "45 years service"/retirement scheme, and one each for the USAF and the Spanish Air Force.

The 1/72 C-130J nacelle correction pack (resin) for the Italeri kit comprises four nacelles, four spinners and 24 blades, and four vent doors - the pack also includes detailed instructions on stretching the Italeri kit to the long fuselage -30 model.

For release by the end of June is a C-2A Greyhound conversion for the Revell 1/144 Hawkeye kit. This comprises are clear injected fuselage, injected tailplane and cargo doors, and resin detail cockpit and aerials. Also included in this pack are screen printed decals for the US Navy VRC-30 Det 5.

Also due for release by the Queensland Model Hobbies Expo in early September is a total correction set for the 1/48 Vultee Vengeance. This resin pack comprises a completely corrected/reshaped fuselage (with side wall detail), reshaped nacelle with engine and propeller, fully detailed cockpit (with pilot's seat, panel, controls, nav/gunner's detailed compartment), detailed bomb bay with doors and bomb (with choice of US or RAF fins), various bulkheads, flattened main wheels ... and a few other bits and pieces. The parts are already in production, and waiting for build photos and instructions to be organised.

Full details on these new products from ozmods@bigpond.net.au

gregozmods · « **Reply #8 on:** June 17, 2012, 06:48:48 AM »

The OzMods 1/144 has been revised with new screen-printed decals.

GTX_Admin · « **Reply #9 on:** June 17, 2012, 06:49:32 AM »

Thanks and welcome aboard Greg!

Cliffy B · « **Reply #10 on:** August 02, 2012, 09:06:56 AM »

Quote from: GTX_Admin on June 15, 2012, 04:14:11 PM

News from Greg ( not me) from :

Quote
by gregozmods » Fri Jun 15, 2012 6:40 pm

For release by the end of June is a C-2A Greyhound conversion for the Revell 1/144 Hawkeye kit. This comprises are clear injected fuselage, injected tailplane and cargo doors, and resin detail cockpit and aerials. Also included in this pack are screen printed decals for the US Navy VRC-30 Det 5.

Any news on this one?

gregozmods · « **Reply #11 on:** August 02, 2012, 10:13:14 AM »

Quote from: Cliffy B on August 02, 2012, 09:06:56 AM

Quote from: GTX_Admin on June 15, 2012, 04:14:11 PM
News from Greg ( not me) from :

Quote
by gregozmods » Fri Jun 15, 2012 6:40 pm

For release by the end of June is a C-2A Greyhound conversion for the Revell 1/144 Hawkeye kit. This comprises are clear injected fuselage, injected tailplane and cargo doors, and resin detail cockpit and aerials. Also included in this pack are screen printed decals for the US Navy VRC-30 Det 5.
Any news on this one?

Hi Cliffy:

Yes, it is out ... but haven't done much about promoting it because we are currently in Seattle (USA) on our way to US IPMS Nationals in Florida next week. There is a bit about it on Kampfluggen144, and in our section of the 'Forum' on Aussie Modeller Internation web sites. Sorry I can't give web addresses - travelling very light. If you want one, please email ozmods@bigpond.net.au and we will get it to you in a couple of weeks (we're back in Australia about 15 August). Greg A.

Brian da Basher · « **Reply #12 on:** August 03, 2012, 04:37:05 PM »

You're in Seattle now? Looks like I missed you by a week! Dang! To me, Ozmods is the pride of the antipodes!

Brian da Basher

gregozmods · « **Reply #13 on:** August 04, 2012, 12:35:41 AM »

Thanks Brian. Compliments always appreciated. Last night did a modelers' meet here in Seattle at the Museum of Flight (North Western Modelers). Great bunch of guys (and a couple of gals). What an incredible venue to have meetings, you folk sure have it lucky!

Jeffry Fontaine · « **Reply #14 on:** August 04, 2012, 01:04:40 AM »

Glad you liked it. The NWSM group is a great bunch of folks.

kitnut617 · « **Reply #15 on:** August 04, 2012, 01:36:32 AM »

Hello Greg, and welcome to the forum.

I've got a question, do you still do the 1/72 Lincoln B.31 conversion ? (the long nose)

Robert

Rickshaw · « **Reply #16 on:** August 25, 2012, 10:56:24 AM »

Ozmods have just announced the release of a 1/144 Greyhound conversion:

gregozmods · « **Reply #17 on:** August 25, 2012, 02:51:25 PM »

Quote from: kitnut617 on August 04, 2012, 01:36:32 AM

Hello Greg, and welcome to the forum.

I've got a question, do you still do the 1/72 Lincoln B.31 conversion ? (the long nose)

Robert

---------------------------------------------------------------------------------------------------------------------

Hi Robert: We didn't do it, but I think Paragon had it for both 1/72 and 1/48. Don't know if they are still available.

philp · « **Reply #18 on:** August 26, 2012, 05:10:58 AM »

Greg,
Nice seeing you here.

I met Greg at Fantasy of Flight during the Nats earlier this month. Pretty good guy in my opinion.

Just got to get him doing more 72nd...

gregozmods · « **Reply #19 on:** October 25, 2012, 03:17:22 PM »

The new OzMods' web site went live today! The address is still the same - http://www.ozmods-kits.com - but the host server is new. The new site is a completely different format to before. In a nutshell, it's mostly photos and info of products. In fact, for the first time we have virtually all products with photos (except for some of the smaller 1/144 weapons). In particular, all the Scaledown items are now in photos. The home page will feature regular updates of new products, news of forthcoming items, etc. Please check it out, and bookmark it!

GTX_Admin · « **Reply #20 on:** October 25, 2012, 06:15:58 PM »

Looks good Greg.

Rickshaw · « **Reply #21 on:** October 26, 2012, 07:22:38 PM »

That's a lot nicer than the old site. Much easier to navigate!

gregozmods · « **Reply #22 on:** November 17, 2012, 01:47:32 PM »

OzMods' latest 120 mm Military Figure has just been released. This resin kit is titled, "River Crossing", and depicts an Aussie Digger (with Owen Gun) crossing a river in New Guinea during WWII. It's yet another example of Phil Walden's remarkable talent, and presents a dramatic and emotional image. Kit is Aus$45 plus post. It's already up on our web site at http://www.ozmods-kits.com Can be purchase with any credit card or PayPal to ozmods@bigpond.net.au

(Post and packing: Within Australia Aus$9; to NZ Aus$12; to Pacific Rim Aus$15; to North America Aus$16; to Europe, UK and Rest of World Aus$18.)

gregozmods · « **Reply #23 on:** November 17, 2012, 01:48:57 PM »

OzMods has just released three sets of turbine exhaust pipes that will set your 1/72 C-130 a, E, H and J models apart from the rest! John Guyer, who did our brilliant nacelle corrections for the Italeri 1/72 C-130J kit, has done it again with these highly refined and detailed pipes. They are OZCONV7212 for the C-130J, and OZCONV7213 for the C-130E/H. Price is Aus$5.50 for a set of four. (The OzMods' C-130A conversion pack also has four exhaust pipes peculiar to this model.) See them on http://www.ozmods-kits.com

gregozmods · « **Reply #24 on:** November 17, 2012, 01:51:23 PM »

Forgot to mention to all and sundry a couple of months back (which probably explains why not many have been sold), but we've added a 1/144 Pave Tack Pod to our 1/144 list of products. Price is a princely Aus$1.50.

kitnut617 · « **Reply #25 on:** November 17, 2012, 11:09:15 PM »

D'oh! my shopping list got a bit longer --- :)

GTX_Admin · « **Reply #26 on:** November 18, 2012, 03:00:02 AM »

Oh dear..I may have a use for these...just not how you planned though...still it will be on a Herc...

gregozmods · « **Reply #27 on:** December 13, 2012, 06:13:13 AM »

Here's something new from OzMods ...

Brian da Basher · « **Reply #28 on:** December 13, 2012, 07:03:04 AM »

You guys always have the coolest stuff, Mr OzMod!

Brian da Basher

gregozmods · « **Reply #29 on:** December 13, 2012, 11:16:13 AM »

Thanks Brian!

elmayerle · « **Reply #30 on:** December 13, 2012, 12:29:17 PM »

What's the diameter of those 1/144 eight-bladed E-2D propellers? I may have a radically different use for them.

finsrin · « **Reply #31 on:** December 13, 2012, 01:15:01 PM »

Quote from: elmayerle on December 13, 2012, 12:29:17 PM

What's the diameter of those 1/144 eight-bladed E-2D propellers? I may have a radically different use for them.

Is there a 1/72 version ?

GTX_Admin · « **Reply #32 on:** April 14, 2013, 04:11:39 AM »

Seems Greg has been lax in keeping us up-to-date:

Quote

At long last the correction and upgrade for the 1/48 Vengeance is ready! Production is underway, and we're just waiting for the vacform canopies to arrive from the UK before the kit will be released. Price is still Aus$66 plus post. (See photos below.)

The 1/144 F-111 full kit is still being worked on by Chris, but he has his final year of university that is taking priority at the moment (plus the fact that he ties the knot with Betina later this year). So will keep you all posted ... and, judging by the looks at the F-111 posting, this is an eagerly awaited kit.

And here's a sudden one from OzMods! A 1/32 Yokosuka Ohka II Piloted Flying Bomb full kit! Sorry there has been no prior warning about it ... but it has just happened out of the blue (so to speak). This is a complete resin kit (with decals and vac canopy) that OzMods is producing and marketing in association with Lock On Models. It is the old Lone Star Models kit (from the US) that has been cleaned up and with a few extra parts added. It is currently in production, just awaiting the vacform canopies to arrive. Price is Aus$55 plus post. (See photos below.)

Also due to be released shortly will be a correction/upgrade kit for 1/72 Fokker F-27 Friendships. This pack will include new main and nose legs and wheels, landing gear doors, tail plane and fin corrections. We will post photos of the parts shortly.

elmayerle · « **Reply #33 on:** April 14, 2013, 05:12:28 AM »

Any chance of getting a conversion for a RF-111 in 1/48 and 1/72 (at a minimum)? I know the RAAF bought the capability but I don't know how much they used it. Still, it would be a different option and could be applied to other aircraft (thinking of an Avro Arrow with a recce pod instead of a weapons bay pod).

GTX_Admin · « **Reply #34 on:** April 14, 2013, 05:23:33 AM »

The RAAF used the capability a lot. A conversion in 1/48 would be very, very nice.

gregozmods · « **Reply #35 on:** April 14, 2013, 06:10:37 AM »

Sorry one and all! I have been lax! Re the Vengeance, though, as of today (Sunday 14 April), still waiting for the friggin' vac canopies to arrive! Same with the Ohka! Will do a show-all and tell-all then. Please stay tuned!

gregozmods · « **Reply #36 on:** April 14, 2013, 06:13:59 AM »

Quote from: elmayerle on April 14, 2013, 05:12:28 AM

Any chance of getting a conversion for a RF-111 in 1/48 and 1/72 (at a minimum)? I know the RAAF bought the capability but I don't know how much they used it. Still, it would be a different option and could be applied to other aircraft (thinking of an Avro Arrow with a recce pod instead of a weapons bay pod).

We've been talking to someone who has masters in 1/48 almost finished (Lockon Models), and hopefully the RF-111 conversion will see the light of day. Keep fingers crossed that it eventuates!

gregozmods · « **Reply #37 on:** April 14, 2013, 06:27:09 AM »

Quote from: elmayerle on December 13, 2012, 12:29:17 PM

What's the diameter of those 1/144 eight-bladed E-2D propellers? I may have a radically different use for them.

1/144 8-bladers are 29 mm diameter.

gregozmods · « **Reply #38 on:** April 14, 2013, 06:28:34 AM »

Quote from: finsrin on December 13, 2012, 01:15:01 PM

Quote from: elmayerle on December 13, 2012, 12:29:17 PM
What's the diameter of those 1/144 eight-bladed E-2D propellers? I may have a radically different use for them.

Is there a 1/72 version ?

No, we don't do the eight-bladers in 1/72. Only do the six-bladers in this scale.

gregozmods · « **Reply #39 on:** April 23, 2013, 09:20:33 PM »

OzMod's has released its 1/48 Vultee Vengeance fuselage correction and upgrade for the A-Z kit, and also a full kit in 1/32 of the Ohka II piloted flying bomb.

Jeffry Fontaine · « **Reply #40 on:** October 31, 2013, 10:11:23 AM »

In-box review of the new Yokosuka Ohka II Piloted Flying Bomb (kit number OMKIT3201) now available at HyperScale.

Click on html or image to view.

gregozmods · « **Reply #41 on:** February 10, 2014, 04:51:55 AM »

MACCHI 326 VAC CANOPIES NOW AVAILABLE!

OzMods has just released a VACFORM CANOPY for the Italeri 1/48 Macchi 326 kit.

Produced by Falcon in New Zealand, these are the best you’ll ever see! They are available separately to OzMod’s 1/48 Macchi 326 resin cockpit upgrade kit. (OzMod’s also produce other Macchi 326 upgrade sets: Nose wheel leg, flaps and 90 gallon tip tanks, mini gun pods, etc – see details at http://www.ozmods-kits.com/ozmods-conversions-upgrades-148 )

Brilliantly clear, the vac canopies come in a pack of TWO SETS (front windshield and separate main canopy) for Aus$8.80.

Buy now from OzMods – www.ozmods-kits.com or email ozmods@bigpond.net.au – all credit cards accepted as well as PayPal.

Rickshaw · « **Reply #42 on:** July 01, 2014, 08:02:03 AM »

New announcement from OzMods - 1/72 Pilatus PC-9:

kitnut617 · « **Reply #43 on:** July 01, 2014, 08:29:28 AM »

Hmm! nice --- I will have to get the Aeroclub kit I have done, started it sometime ago but it got shelved ---

ChernayaAkula · « **Reply #44 on:** July 02, 2014, 08:15:31 AM »

Injection-moulded PC-9!

So cool!

jcf · « **Reply #45 on:** July 02, 2014, 09:55:35 AM »

Wrong scale.

Well, someone had to say it.

GTX_Admin · « **Reply #46 on:** May 21, 2015, 05:58:36 AM »

Hot off the email:

elmayerle · « **Reply #47 on:** May 21, 2015, 09:31:50 AM »

Very nice. Is the engine section separate from the firewall forward? that could be ideal for doing a T-6 "Texan II" derivative or more.

gregozmods · « **Reply #48 on:** May 21, 2015, 09:40:29 AM »

Getting a lot of requests for it. Just have to find time to work on it ... soon!

elmayerle · « **Reply #49 on:** May 21, 2015, 10:10:09 AM »

Cool! Having worked on the design of the original, I'm definitely interested. If memory serves me correctly (and we're going back nearly two decades, here), the lines up to the firewall are the same while there are new lines from there forward and new exhausts. Of course, you've also got the separate windscreen on the T-6 (part of complying with the bird-strike requirements Beech had to meet).

Rickshaw · « **Reply #50 on:** May 21, 2015, 11:53:34 AM »

Quote from: gregozmods on May 21, 2015, 09:40:29 AM

Getting a lot of requests for it. Just have to find time to work on it ... soon!

I received an email of the announcement yesterday but when I checked your website, the new models weren't available!

gregozmods · « **Reply #51 on:** February 16, 2016, 02:55:40 PM »

OzMods has revised its 1/144 Grumman Panther - it is now reissued as OMKIT 14415 with clear injected canopy, optional vac canopy (x 2), screen printed "island" decals for the US Navy Blue Angels (with 5 a/c numbers to do any or all) and VFA-192 Golden Dragons. Details at www.ozmods-kits.com

gregozmods · « **Reply #52 on:** December 20, 2016, 03:35:50 PM »

PC-9 in RAAF trainer and US Army markings available

OzMods has issued a rerun of its PC-9 kit OZMKIT 7203 - with RAAF Trainers, ARDU and 76 SQN, and US Army Test Aircraft decals. Price is Aus$39.60 plus post - further details on our website at

(The other two PC-9 kits - 7201 and 7202 - are now out of stock.)

Early in the New Year there will be a large new 1/144 injected kit released ... more details next week.

Also in the New Year, OzMods will release at 1/72 conversion set to convert the Italeri and Airfix C-130 E/H back to C-130A standard. This new set will replace OZCONV7201 - it will have all the parts contained in this set, as well as correct nacelles and exhaust sections.

gregozmods · « **Reply #53 on:** December 29, 2016, 08:50:42 AM »

OzMods has released a 1/144 Bristol Mk 31 Freighter. This is a fully injected kit with clear injected, vacform (2 supplied) and decal canopy options. It also has a detailed flight deck (wait ‘till you see the panel!). Two boxings are in the initial release: OMKIT14418 with SAFE Air (New Zealand) and British United decals; and OMKIT14419 with RNZAF and RAF decals.

See details at www.ozmods-kits.com

Jeffry Fontaine · « **Reply #54 on:** December 29, 2016, 08:54:45 AM »

The Bristol Freighter always reminds me of what Thomas the Tank Engine would look like if he had wings

kitnut617 · « **Reply #55 on:** December 29, 2016, 08:55:02 AM »

1/72 please ----

Rickshaw · « **Reply #56 on:** December 29, 2016, 11:24:15 AM »

Quote from: kitnut617 on December 29, 2016, 08:55:02 AM

1/72 please ----

Fly apparently has plans just for that...

gregozmods · « **Reply #57 on:** March 14, 2017, 03:25:40 PM »

OzMods has released its new 1/72 C-130A conversion for the Airfix/Italeri C-130E/H kits. All revealed in the accompanying promo (please also note there are four vent doors included - but not mentioned in the text). This new product replaces the previous OZCONV 7201 pack, which will be no longer available once existing stock has been sold.

Full details on our web site: www.ozmods-kits.com

tsrjoe · « **Reply #58 on:** March 20, 2017, 09:22:14 PM »

verrry nice, hmm, might be worth picking up an extra set just to replace the engines on my Italeri Herc :)

Jeffry Fontaine · « **Reply #59 on:** March 21, 2017, 01:54:29 AM »

Quote from: gregozmods on March 14, 2017, 03:25:40 PM

OzMods has released its new 1/72 C-130A conversion for the Airfix/Italeri C-130E/H kits. All revealed in the accompanying promo (please also note there are four vent doors included - but not mentioned in the text). This new product replaces the previous OZCONV 7201 pack, which will be no longer available once existing stock has been sold.

Full details on our web site: www.ozmods-kits.com

Would be nice to have the original "Roman Nose" as an optional part to build the very early production C-130A models.

The Big Gimper · « **Reply #60 on:** March 21, 2017, 02:31:19 AM »

Quote from: Jeffry Fontaine on March 21, 2017, 01:54:29 AM

Quote from: gregozmods on March 14, 2017, 03:25:40 PM
OzMods has released its new 1/72 C-130A conversion for the Airfix/Italeri C-130E/H kits. All revealed in the accompanying promo (please also note there are four vent doors included - but not mentioned in the text). This new product replaces the previous OZCONV 7201 pack, which will be no longer available once existing stock has been sold.

Full details on our web site: www.ozmods-kits.com

Would be nice to have the original "Roman Nose" as an optional part to build the very early production C-130A models.

The C-130 Roman nose (in 1/72) is available here: http://www.blackbirdmodels.co.uk/c-130a-roman-nose-72-896-p.asp

Jeffry Fontaine · « **Reply #61 on:** March 21, 2017, 03:43:33 AM »

Quote from: The Big Gimper on March 21, 2017, 02:31:19 AM

Quote from: Jeffry Fontaine on March 21, 2017, 01:54:29 AM
Quote from: gregozmods on March 14, 2017, 03:25:40 PM
OzMods has released its new 1/72 C-130A conversion for the Airfix/Italeri C-130E/H kits. All revealed in the accompanying promo (please also note there are four vent doors included - but not mentioned in the text). This new product replaces the previous OZCONV 7201 pack, which will be no longer available once existing stock has been sold.

Full details on our web site: www.ozmods-kits.com
Would be nice to have the original "Roman Nose" as an optional part to build the very early production C-130A models.
The C-130 Roman nose (in 1/72) is available here: http://www.blackbirdmodels.co.uk/c-130a-roman-nose-72-896-p.asp

So much for "One Stop Shopping" :/

gregozmods · « **Reply #62 on:** June 25, 2017, 01:57:55 PM »

OzMods has released a new boxing of its 1/72 injected kit of the PC-9. Quite a variety of decal options! Details on the web site at www.ozmods-kits.com or the OzMod's Facebook site at https://www.facebook.com/OzModsScaleModels/

Tophe · « **Reply #63 on:** June 25, 2017, 02:06:54 PM »

Interesting... Do you plan to make a single-seater from it or something?

gregozmods · « **Reply #64 on:** August 01, 2017, 06:42:28 AM »

OzMods has expanded its range of 1/144 injected kits of the Bristol Freighter with a new boxing of the Mk 21 version to accompany its Mk 31 models.

The new kit (OMKIT 14420) is the basic Mk 31 kit with resin parts to do the conversions. For RAAF fans the decals include regos for not only all aircraft, but different schemes during their service lives. The decals also include one each for the RAF and Silver City Airways ... and another one that combines both of these!

See kit details on the web site at http://www.ozmods-kits.com

OzMods is also on Facebook at https://www.facebook.com/OzModsScaleModels

gregozmods · « **Reply #65 on:** February 23, 2019, 01:48:17 PM »

OzMods has released its 1/144 Bombardier Dash 8 - 300. Injection moulded (with locating pins) with resin details. Silk-screened decals by Ronin Graphics for Philippines Airlines, Jetstar, British Airways, and Air New Zealand. Full info: www.ozmods-kits.com

GTX_Admin · « **Reply #66 on:** November 17, 2020, 02:13:26 AM »

Buzzbomb · « **Reply #67 on:** November 17, 2020, 05:36:41 AM »

Today must be the day for awesome submarine releases

Old Wombat · « **Reply #68 on:** November 17, 2020, 04:26:36 PM »

O-Boats!

Sneaky little baskets!

Buzzbomb · « **Reply #69 on:** November 17, 2020, 06:47:07 PM »

Quote from: Old Wombat on November 17, 2020, 04:26:36 PM

O-Boats!

Sneaky little baskets!

Worked with a few RAN dudes on one exercise, one an ex submariner.
He wore a great T-shirt, simply a cross hair sight picture of a carrier with the words.
Hi Skimmer
<sight picture image>
Bye Skimmer

Old Wombat · « **Reply #70 on:** November 17, 2020, 07:55:17 PM »

I had the privilege of seeing a copy of the Proof of Kill photo from the exercise, taken through Ovens' attack periscope (the image in the Navy News article is through their search periscope), she was even closer than that image & in a perfect firing slot.

gregozmods · « **Reply #71 on:** December 29, 2020, 05:58:11 AM »

www.ozmods-kits.com

Old Wombat · « **Reply #72 on:** December 29, 2020, 01:35:43 PM »

Ooh! O-boats!

Volkodav · « **Reply #73 on:** December 30, 2020, 12:00:37 PM »

Quote from: Old Wombat on December 29, 2020, 01:35:43 PM

Ooh! O-boats!

Horrible, disgusting cramped things, not like the Collins that you can hold a dance in or the Attacks that are even bigger.

GTX_Admin · « **Reply #74 on:** December 31, 2020, 02:53:39 AM »

Many years ago I worked with a guy who used to serve on the Oberons. He told me an interesting story of a visit to Kiel, Germany just after collecting one of the subs. Apparently, when they visited, a whole lot of ex- U-boat guys came down to have a look over the new subs and gave lots of interesting and sobering advice on how the subs would survive in combat (comments such as "...that feature there won't last under depth charging...").

Whilst a 1/350 version is nice, a 1/144 one would be nicer...

GTX_Admin · « **Reply #75 on:** November 24, 2023, 02:12:34 AM »

For those who may want one Ozmods are re-releasing their 1/48 de Havilland Canada DHC-4 (C-7) Caribou kit.

The Big Gimper · « **Reply #76 on:** February 29, 2024, 07:58:56 AM »

For those who may want one Ozmods are re-releasing their 1/72 PC-9 kits - OMKIT 7202 - featuring decals for the Royal Air Force and RAAF FAC aircraft. And OMKIT 7207, featuring several markings for the RAAF Roulettes aerobatic display team.
From now on all OzMod's PC-9 kits will include (apart from resin cockpit, etc) extra detail resin parts (wheels, landing gear struts) and paint masks for the canopy.


Scandinavian GB Now Open!!!

News:

Author Topic: OzMods Products (Read 34417 times)