Author Topic: DreamModel  (Read 5014 times)

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
DreamModel
« on: November 24, 2012, 01:14:10 AM »
DreamModel —— 1:48th scale replacement/substitute photo-etch brass exhaust nozzles for the F-35A/B/C

Apparently a very recent arrival to the aftermarket/accessory producers.  Available only by eMail correspondence via a gMail and Yahoo address.  The two products they currently offer are both for the F-35 engine exhaust as direct replacement photo-etch brass for the plastic part included in the kit. 

***Since my original post on this company and products the topic and image I linked to at ARC Forums has gone to destination fcuked.  After a quick search of the ARC Forums I did find the original source topic at ARC at a new URL but all of the original images are gone.  Due to the changes and lack of further information at the original link I am deleting that portion of my input on this subject. 
« Last Edit: November 15, 2019, 03:06:36 AM by Jeffry Fontaine »
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: DreamModel
« Reply #1 on: November 24, 2012, 02:04:55 AM »
They do have a website (LINK), but it's rather clumsy to navigate and kinda incomplete (or I just haven't found the right buttons on their page).
You can get their stuff on eBay, too.
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: DreamModel
« Reply #2 on: November 24, 2012, 02:18:39 AM »
Thanks Moritz. 

That helps fill in one of the blanks.  All I had to go by was the information in the topic that was posted and was not feeling like applying myself to a list of results from the search engine of choice. 

***Just had a peek at the web page you linked.  I completely understand your navigation problem now.  So no, it is not just you not finding the right buttons, it is an absolute mess.  :)
« Last Edit: November 24, 2012, 02:20:36 AM by Jeffry Fontaine »
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: DreamModel
« Reply #3 on: November 24, 2012, 04:25:13 AM »
That website also comes up with Virus warnings.. :o

I think I will stick to emailing them.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: DreamModel
« Reply #4 on: November 24, 2012, 06:28:53 AM »
Never saw a warning and I am using the free version of AVG which has been quite reliable so far.  Hopefully it is not an actual virus and just a problematic cookie. 
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: DreamModel
« Reply #5 on: November 25, 2012, 05:28:34 AM »
Have been in touch with them and got a very prompt reply - the nozzles sell for USD25 each
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: DreamModel
« Reply #6 on: December 29, 2016, 04:41:32 AM »
Something new:



I would prefer a 1/350 or even a 1/144 or larger scale.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: DreamModel
« Reply #7 on: December 29, 2016, 10:22:17 PM »
1/350 or 1/35 ... either would do ... neither could I afford. ::)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: DreamModel
« Reply #8 on: October 17, 2019, 07:35:53 AM »


J-20: 1
F-35: 0

« Last Edit: October 17, 2019, 07:42:57 AM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: DreamModel
« Reply #9 on: October 17, 2019, 10:26:31 PM »
I've got the Trumpeter 1/72 kit, is this a re-boxing of it ?

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: DreamModel
« Reply #10 on: October 18, 2019, 01:32:44 AM »
Scalemates says no. The Trumpeter, Bronco and Dream Model are all shown as separate molds.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: DreamModel
« Reply #11 on: November 15, 2019, 02:40:52 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: DreamModel
« Reply #12 on: August 15, 2021, 07:19:13 PM »
DreamModel is planning to release soon the Bell UH-1Y Venom in 1:72 scale

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: DreamModel
« Reply #13 on: August 15, 2021, 09:35:28 PM »
Looking forward to getting one of those too ----

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: DreamModel
« Reply #14 on: October 25, 2021, 06:48:05 PM »
Looks to be the kit decals options.

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...