Beyond The Sprues
Modelling => Ideas & Inspiration => Aero-space => Topic started by: The Big Gimper on July 26, 2018, 02:47:46 AM
-
Future project. CF-104A with F-16D wings. Also upgrade to either a General Electric F110-GE-129 or Pratt & Whitney F100-PW-220/220E replacing the Orenda J79-OEL-7.
(https://farm1.staticflickr.com/927/29767408078_9c64fcaf99_b.jpg) (https://flic.kr/p/MmrKkL)
CF-104E-02 (https://flic.kr/p/MmrKkL) by Big Gimper (https://www.flickr.com/photos/21812089@N02/), on Flickr
-
Niiiiice! 8)
No intakes fitted so far. Hmmmmm. F-15-ish ones?
-
Thanks. Wings are about 25% larger than RW wings. Could be, still investigating.
-
Very nice!! The engine change is going to require a re-contouring of the aft end as either of the new engines is roughly 10 inches greater in diameter than the J79 and that's going to need structure external to that envelope. You might look at how and where you can splice in a trimmed portion of an F016 aft end.
-
Very nice!! The engine change is going to require a re-contouring of the aft end as either of the new engines is roughly 10 inches greater in diameter than the J79 and that's going to need structure external to that envelope. You might look at how and where you can splice in a trimmed portion of an F016 aft end.
Thanks Evan. You zeroed in the problem and the possible solutions. I don't have and scrap F-104 to test my approach so I need to build it mentally first.
-
x
-
I'm liking... :smiley:
-
Carl,
What Starfighter is moulded in red plastic?
all best
John
The Esci CF-104 "Arrow/Toothbrush" scheme, and possibly Darryle Greenameyer's civvie bird too.
Alvis 3.1something
-
Carl,
What Starfighter is moulded in red plastic?
all best
John
The Esci CF-104 "Arrow/Toothbrush" scheme, and possibly Darryle Greenameyer's civvie bird too.
Alvis 3.1something
Thanks Al. It's the 421 SQN Toothbrush.
-
x
-
This will look great! I would keep the T tail just the way it is. What other ac use an F 100 size engine that might be easier to graft on than an F -16?
-
Carl,
What Starfighter is moulded in red plastic?
all best
John
Thanks Al. It's the 421 SQN Toothbrush.
ESCI!
So you got that one at Hobby Centre?
I had seen it months ago, and was in the market for a Stargighter, so I went down this week and looked for it for about 15 minutes. Luckily I found the Heller kit, comes with a 2 seater, for a song (sort of.)
We are the only 2 guys in Ottawa hunting down 1/72nd CF-104s.
Mind you, I don't think I'd have been keen on the red plastic ... hard to paint over with a brush.
all best
John
Busted! It was me John and my sticky fingers. I did not know it was red. With one coat of grey primer and 2 coats of Ghost Grey or similar colour, it should be okay.
-
This will look great! I would keep the T tail just the way it is. What other ac use an F 100 size engine that might be easier to graft on than an F -16?
Oh, you have done this already? ;D Yeah, changing out the exhaust is going to be tricky. Will look for other options.
-
One option for changing out the exhaust would be an engine nacelle, specifically the rear half thereof, from a 1/48 B-58. I still think that, despite the effort and trimming required, using the back end of an F-16 would be the easiest way. I suppose that if ease was more important that cost, you could use the back end of a 1/48 T-50 or F-20.