Author Topic: SARO Torbay  (Read 6709 times)

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
SARO Torbay
« on: March 09, 2018, 07:08:16 PM »
Hopefully this will be ok for this Gb, it is a refubishment of an old resin SRA1 kit I have dredged out.

This is a real world prototype that began development for the Pacific campaign, so what if that went on until '46 ?




I reckon something like this will work for this GB Theme

Online Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: SARO Torbay
« Reply #1 on: March 10, 2018, 01:35:12 AM »
SARO Whale Shark or SARO Catfish?  :)
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Tophe

  • He sees things in double...
  • twin-boom & asymmetric fan
    • my models
Re: SARO Torbay
« Reply #2 on: March 10, 2018, 01:59:22 AM »
Good!
Is this scratch-built or a commercial kit? (that I did not know) and which scale ?

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: SARO Torbay
« Reply #3 on: March 10, 2018, 02:58:34 AM »
Good!
Is this scratch-built or a commercial kit? (that I did not know) and which scale ?

Yes, we want to know.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: SARO Torbay
« Reply #4 on: March 10, 2018, 04:40:09 AM »
1/72 Resin Kit, from some French Manufacturer (Jean-Pierre DUJIN ??), probably a good 15+ years old now.

I have gone with Torbay as SARO used a lot of place names for some of their aircraft and it was designed to operate from bays and inlets



Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: SARO Torbay
« Reply #5 on: March 10, 2018, 05:22:03 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: SARO Torbay
« Reply #6 on: March 11, 2018, 01:03:21 AM »
Good subject matter  :smiley: :smiley: :smiley:

I started one years ago but it got packed for the house move I did and it's still buried in the boxes somewhere. The one I have is a Planet Models one, resin too.

It doesn't have to be RN though, the RAF operated flying boats too ---

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: SARO Torbay
« Reply #7 on: March 11, 2018, 04:20:06 AM »
This is one of my wants in plastic, I love the lines of this aircraft, looking forward to see this finished and what you do with it

Mog
>^-.-^<
Mostly Harmless...............

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: SARO Torbay
« Reply #8 on: March 12, 2018, 01:15:56 AM »
Some more inspiration...or sorts:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Moderator
  • Stylishly late...because he was reading comics
Re: SARO Torbay
« Reply #9 on: March 12, 2018, 03:55:30 AM »
I would say its too far along for the GB but I think you still have A LOT of work ahead of you so i'll allow it  ;D

Some kits fight the whole way!
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: SARO Torbay
« Reply #10 on: March 13, 2018, 05:49:57 AM »
I would say its too far along for the GB but I think you still have A LOT of work ahead of you so i'll allow it  ;D

Some kits fight the whole way!

Thanks, the basic construction was 11 parts, two fuselage halves, two wings and two tail planes, two float assemblies and a cockpit tub.
Like most resin kits, the "fun part" is getting it to fit and for the finish to be bubble free and acceptable.
Fit was ok.. bubble free and acceptable..well lets say, work is ongoing.

Offline Buzzbomb

  • Low Concentration Span, oft wanders betwixt projects
  • Accurate Scale representations of fictional stuff
    • Club and my stuff site
Re: SARO Torbay
« Reply #11 on: March 29, 2018, 06:22:53 PM »
the end is nigh.. best I finish this up !

tidied it up a bit, really did botch it the first time around.
Went for a more traditional 46ish type scheme of FAA Grey over Sky.






Took to the Wings and Tracks comp here and it sank without trace ;)

Offline Robomog

  • ...had a very bad experience with [an] orange...
  • Would you buy a used kit from this man?
Re: SARO Torbay
« Reply #12 on: March 29, 2018, 06:42:35 PM »
Absolutely stunning !

Mog
>^-.-^<
Mostly Harmless...............

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: SARO Torbay
« Reply #13 on: March 29, 2018, 09:49:37 PM »
Wow did that finish up a stunner!

The perfect model for this GB and your work on the water is outstanding!

Brian da Basher

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: SARO Torbay
« Reply #14 on: March 30, 2018, 02:53:53 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • Holding Pattern
  • *
  • I'd rather be dirtbike riding...
Re: SARO Torbay
« Reply #15 on: March 30, 2018, 07:31:12 AM »
That's a "Double Damn"

Outstanding result

Offline Acree

  • That will teach you to frustrate the powers that be...won't it comrade?
  • Sentenced to time in the BTS Gulag...
Re: SARO Torbay
« Reply #16 on: March 30, 2018, 07:38:38 AM »
The Torbay is fantastic, but I can’t even fathom the depths of your water-modeling skill!

Offline kim margosein

  • Newly Joined - Welcome me!
Re: SARO Torbay
« Reply #17 on: March 30, 2018, 08:56:55 AM »
The water is beyond words.   The only sadness is the SARO was such an ungainly aircraft. 

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: SARO Torbay
« Reply #18 on: March 30, 2018, 04:10:00 PM »
SR.A/1 model is spot on, fine build. :smiley:
Scratch building water like that purrrfection. :-*

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: SARO Torbay
« Reply #19 on: March 30, 2018, 04:53:05 PM »
Nice one, Brian! 8)

Took to the Wings and Tracks comp here and it sank without trace ;)

Obviously don't know a good thing when they see it! ::)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."