Author Topic: Bench Clearing Brawl! GB  (Read 6062 times)

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Moderator
  • Stylishly late...because he was reading comics
Bench Clearing Brawl! GB
« on: November 01, 2012, 04:02:53 AM »
1. Have Fun!!!

2. All started projects are allowed, from one percent started to 99 percent complete. The whole point of this GB is to "get er done" and finish those projects you have started. We all seem to stall at different points, so a picture of where you last left off, and a description of your plans are taking you makes a logical start.

3. Any medium is welcomed - so physical models, Pixels/profiles and stories (and anything else if you can think of it) are all welcome.

4. Creativity encouraged as is collaboration.

5. Duration is November 1 2012 to December 31, 2012.  An extension may be granted, if you feel your projects would remain incomplete without one!

6. Physical creations and pixels/stories will be judged separately.

7. Multiple entries are allowed and encouraged. This GB is supposed to get you across the finish line!! The more Finishers the better!!

Any questions are to be directed to the Moderator (Taiidantomcat).
See Rule 1!
« Last Edit: November 02, 2012, 08:48:36 AM by taiidantomcat »
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Moderator
  • Stylishly late...because he was reading comics
Re: Bench Clearing Brawl! GB
« Reply #1 on: November 22, 2012, 02:10:15 AM »
I will be out of town and thus (possibly) out of touch for the next 72 hours or so  :-\ :-\
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Bench Clearing Brawl! GB
« Reply #2 on: December 29, 2012, 07:59:06 AM »
Is there any chance of an extension?

I've got something for the 3D side that I can probably get together if given an extra week or two.

Brian da Basher

Offline taiidantomcat

  • Plastic Origamist...and not too shabby with the painting either!
  • Moderator
  • Stylishly late...because he was reading comics
Re: Bench Clearing Brawl! GB
« Reply #3 on: December 30, 2012, 12:30:27 AM »
I would like to offer an extension of two more weeks, especially if it means more finished models, and I know I could use it.

Please post if you need more time, even just "+1" will be a good indicator

+1 for an extension myself.
"They know you can do anything, So the question is, what don't you do?"

-David Fincher

Offline Cliffy B

  • Ship Whiffer Extraordinaire...master of Beyond Visual Range Modelling
  • Its ZOTT!!!
    • My Artwork
Re: Bench Clearing Brawl! GB
« Reply #4 on: December 30, 2012, 01:15:25 AM »
Alright I'll try and join in if the extension goes through.  Count me in.  I have a 1/144 airplane I have to finish that's been collecting dust for probably 1.5 years or more.
"Radials growl, inlines purr, jets blow!"  -Anonymous

"Helos don't fly.  They vibrate so violently that the ground rejects them."  -Tom Clancy

"If all else fails, call in an air strike."  -Anonymous

Offline Logan Hartke

  • High priest in the black arts of profiling...
  • Rivet-counting whiffer
Re: Bench Clearing Brawl! GB
« Reply #5 on: December 30, 2012, 04:32:37 AM »
+1  I'd redone the lighting and the NMF on the wing yesterday when...my program crashed and the last backup had failed.  I need a couple days to redo that.

Thanks,

Logan

Offline Artoor_K

  • On the run from Polish Rivet Counters...
  • Use the power of your dreams!
Re: Bench Clearing Brawl! GB
« Reply #6 on: December 30, 2012, 05:52:40 AM »
+1 , I'd like to finish F-19 :)
Sickening, weakening
Don't let another somber pariah consume your soul
You need strengthening, toughening
It takes a bit of dark to rekindle the fire burning in you
Ignite the fire within you

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: Bench Clearing Brawl! GB
« Reply #7 on: December 30, 2012, 06:06:30 AM »
+1,  BPH-417 is proving to be problematic at my skill level. 

Offline Brian da Basher

  • He has an unnatural attraction to Spats...and a growing fascination with airships!
  • Holding Pattern
  • *
  • Hulk smash, Brian bash
Re: Bench Clearing Brawl! GB
« Reply #8 on: December 30, 2012, 07:06:44 AM »
Thank you, Mr Tomcat! I think you'll like what I found languishing.

Brian da Basher

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Bench Clearing Brawl! GB
« Reply #9 on: January 16, 2013, 07:32:33 PM »
I assume the GB is now closed.  I hope some benches were cleared...if only a little.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Bench Clearing Brawl! GB
« Reply #10 on: January 26, 2013, 05:04:55 AM »
Thank you to Ben (aka taiidantomcat) for running this GB.  Job well done.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline arkon

  • Paper Building Maestro
Re: Bench Clearing Brawl! GB
« Reply #11 on: January 26, 2013, 01:02:04 PM »
finally got one off the bench .......but added three more or so...... face palm.( dang ,can not find face palm emoticon).......double face palm.
wish i could have gotten more done but i am happy with the one.
thanks to all and to admin for pushin it . otherwise it would still be on the bench.(or in the to be done box).
the paper gods demand sacrifice