Author Topic: A&A Models  (Read 11246 times)

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
A&A Models
« on: July 25, 2017, 08:03:07 PM »
New Topic for A&A Models

VJ101C-X2 SUPERSONIC-CAPABLE VTOL FIGHTER. Brief history: In 1959 the design teams of the German companies Bolkow, Heinkel and Messerschmitt were formed into a consortium named Entwicklungsring Sud to develop a Mach 2 VTOL interceptor for the Federal German defence ministry. Heinkel left the consortium in 1964 and in the following year it was re-formed as a company with the title Entwicklungsring Sud GmbH, known more usually as EWR.Two prototypes of the EWR VJ 101C single-seat experimental VTOL aircraft were built. Generally similar, they were both of high-wing monoplane configuration, primarily of light alloy construction, had retractable tricycle landing gear and accommodated the pilot in a pressurised cockpit, seated on a Martin-Baker ejection seat. Powerplant comprised six RB.145 turbojets, developed jointly by Rolls-Royce and MAN-Turbomotoren, with two mounted vertically in the fuselage, immediately aft of the cockpit, and two in a swiveling pod at each wingtip.

​The VJ101C X-2 (second prototype) had ​afterburning engines in the wingtip pods, providing greater power for take-off and landing, and this made its first hovering flight on 12 June 1965. Four months later, on 22 October, the X-2 achieved the first full transitions from vertical to horizontal flight and vice versa, but development was discontinued soon after.



Reserve your at Hannants: https://www.hannants.co.uk/product/AAM7202
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #1 on: July 26, 2017, 02:02:28 AM »
Mutter, grumble.... ::)
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Rickshaw

  • "Of course, I could be talking out of my hat"
Re: A&A Models
« Reply #2 on: July 26, 2017, 01:06:34 PM »
Something to look forward to.  Going to need some work to make it workable as a fighter but it's an aircraft I've long had an interest in.  In the one true scale as well.   ;D

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #3 on: October 27, 2017, 09:08:57 PM »
From Big Schnoz department:



Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #4 on: October 27, 2017, 10:43:28 PM »
Still the wrong scale...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: A&A Models
« Reply #5 on: October 27, 2017, 11:20:11 PM »
From Big Schnoz department:


That thing would not look out of place in the Battlestar Dramatica prequel Caprica
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A&A Models
« Reply #6 on: October 28, 2017, 12:39:32 AM »
Still the wrong scale...

I was thinking you could buy a couple of these, chop out the middle section (with the cockpit & wings) & the tail, join the remaining ends together & you'd have a pair of rather funky 1/48 scale engine pods for ... well ... something! ;) 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #7 on: October 28, 2017, 01:09:02 AM »
Still the wrong scale...

I know Greg. Sorry about that. 
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Rickshaw

  • "Of course, I could be talking out of my hat"
Re: A&A Models
« Reply #8 on: October 28, 2017, 12:41:40 PM »
Still the wrong scale...

People just aren't listening, are they, Greg?   ;)

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A&A Models
« Reply #9 on: October 28, 2017, 12:56:04 PM »
Neato kits  :smiley:

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #10 on: October 29, 2017, 12:38:10 AM »
Well, one can get a 3D printed La200 (see here) but it ain't cheap...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A&A Models
« Reply #11 on: October 29, 2017, 08:56:14 AM »
This will hurt Unicraft, which has this and the other La-200 versions available in 1/72.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #12 on: January 13, 2018, 09:07:31 PM »
Coming soon.

Hello fellows,
Check out the 3D renders of our next 1/72 model kit - Helwan HA-300.
This interesting supersonic interceptor was designed by Willy Messerschmitt for the purposes of Egypt Air Force during 1960s.
Our kit shall consist of 90 pieces including PE sheet and adhesive masks.
Due to its assembling simplicity it means to be a good "weekend" kit.


Source here: http://www.72news.eu/2018/01/a-models-helwan-ha-300-renders.html

Can be pre-ordered at Hannants: https://www.hannants.co.uk/product/AAM7207







« Last Edit: January 13, 2018, 09:58:00 PM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline ysi_maniac

  • I will die understanding not this world
Re: A&A Models
« Reply #13 on: January 13, 2018, 11:50:20 PM »
Are these models made of resin or styrene?

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #14 on: January 14, 2018, 12:09:30 AM »
Are these models made of resin or styrene?

Previous kits were made with styrene but there is no information on this one.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A&A Models
« Reply #15 on: January 14, 2018, 02:38:39 AM »
That HA-300 is definitely on my Must Buy list.  I hope they will also do a HF-24.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #16 on: January 14, 2018, 05:46:10 AM »
Need I make comment on the wrong scale... ::)
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: A&A Models
« Reply #17 on: January 14, 2018, 07:40:44 AM »
Need I make comment on the wrong scale... ::)








***original beating a dead horse animated .gif has disappeared in to the aether so a replacement was found-jjf
« Last Edit: May 26, 2019, 04:35:42 AM by Jeffry Fontaine »
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #18 on: January 14, 2018, 07:44:35 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #19 on: January 14, 2018, 09:03:19 AM »
Need I make comment on the wrong scale... ::)

No you may not.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline Rickshaw

  • "Of course, I could be talking out of my hat"
Re: A&A Models
« Reply #20 on: January 28, 2018, 01:45:57 PM »


A & A Models Helwan HA-300 Interceptor in 1/72 scale.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A&A Models
« Reply #21 on: January 29, 2018, 12:30:04 AM »


A & A Models Helwan HA-300 Interceptor in 1/72 scale.
That one I am so definitely getting, perhaps even more than one.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A&A Models
« Reply #22 on: February 23, 2018, 09:54:46 AM »
Definitely going to need more than one, especially to do the third prototype which had shock-cone intakes and an extended rear fuselage for the afterburning E300 engine.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #23 on: April 06, 2018, 01:43:09 AM »
Coming soon.



Pre-order yours at hannants: https://www.hannants.co.uk/product/AAM7206
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #24 on: April 06, 2018, 02:28:33 AM »
Mumble....
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #25 on: May 20, 2018, 01:09:58 AM »
1/48 Yakovlev Yak-23DC/UTI coming:

All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #26 on: June 06, 2018, 03:00:03 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #27 on: June 06, 2018, 03:00:37 AM »
For some reason I see this in civilian scheme.
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline arkon

  • Paper Building Maestro
Re: A&A Models
« Reply #28 on: June 06, 2018, 12:41:41 PM »
I’m thinking amphibious
the paper gods demand sacrifice

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #29 on: October 10, 2018, 08:26:40 PM »
1/72 IL-102's production running. Release - Nov/Dec'18.

Art-box and couple of renders presented below...



Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #30 on: October 12, 2018, 07:42:52 PM »
Sigh...
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #31 on: October 31, 2018, 11:52:55 PM »
Final stage of 1/72 IL-102 (#7211) production.

Glad to share few pictures of its sprues.
The kit has over 300 parts, including notable variety of armament.
Set shall also include PE sheet and adhesive masks, which are not shown at the pictures.

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #32 on: November 01, 2018, 01:50:40 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #33 on: January 20, 2019, 05:58:13 PM »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A&A Models
« Reply #34 on: January 20, 2019, 06:39:48 PM »
Ooooh…  :icon_surprised:

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A&A Models
« Reply #35 on: January 20, 2019, 10:56:06 PM »

Would like nice crossed with either of the Chengdu J-7FS prototypes or evolved along the lines its delta-winged sibling was.

Offline kitnut617

  • Measures the actual aircraft before modelling it...we have the photographic evidence.
  • I'd rather be dirtbike riding
Re: A&A Models
« Reply #36 on: January 20, 2019, 11:09:47 PM »

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #37 on: May 26, 2019, 02:27:17 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #38 on: September 06, 2019, 01:50:45 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #39 on: April 19, 2020, 02:53:40 AM »
1/48th Messerschmitt Me.209 V-4 coming:






All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Jeffry Fontaine

  • Unaffiliated Independent Subversive...and the last person to go for a trip on a Mexicana dH Comet 4
  • Global Moderator
  • His stash is able to be seen from space...
Re: A&A Models
« Reply #40 on: April 19, 2020, 04:32:06 AM »
I see a potential Pod Racer in those images.
"Every day we hear about new studies 'revealing' what should have been obvious to sentient beings for generations; 'Research shows wolverines don't like to be teased" -- Jonah Goldberg

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #41 on: September 04, 2020, 03:28:54 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #42 on: October 23, 2020, 02:47:26 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #43 on: July 07, 2021, 09:47:22 PM »
I'm back to my old ways Greg. There is no cure for me.  Maybe cull me from the herd?

« Last Edit: July 07, 2021, 11:52:24 PM by The Big Gimper »
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline ChernayaAkula

  • Was left standing in front when everyone else took one step back...
  • Global Moderator
  • Putting the "pro" in procrastination since...?
Re: A&A Models
« Reply #44 on: July 07, 2021, 10:12:47 PM »
Oooh, a King Air!  :-* Nice!
Cheers,
Moritz

"The appropriate response to reality is to go insane!"

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #45 on: December 25, 2021, 02:08:59 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #46 on: July 08, 2022, 01:52:49 AM »
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #47 on: November 01, 2022, 07:15:30 AM »
Incoming at Hannants

1/72 Martin AM-1 Mauler (Late version) carrier-based US attack aircraft. The kit includes: 147 plastic parts; 2 photo-etch sheets + painting masks; canopy (closed position); decals for 3 liveries ( US Navy); 2 separate sprues with armament




Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline finsrin

  • The Dr Frankenstein of the modelling world...when not hiding from SBA
  • Finds part glues it on, finds part glues it on....
Re: A&A Models
« Reply #48 on: November 01, 2022, 07:52:18 AM »
 :-*

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: A&A Models
« Reply #49 on: November 01, 2022, 08:48:35 AM »
Too small, but nice. :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Kerick

  • Newly Joined - Welcome me!
Re: A&A Models
« Reply #50 on: November 01, 2022, 10:59:58 PM »
I see one in grey and white flying off a carrier early Vietnam.

Offline Gingie

  • The LAV sausage-maker…goes nice with a home made beer I understand
  • Has been to Tatooine...
Re: A&A Models
« Reply #51 on: November 01, 2022, 11:16:10 PM »
Did the Mauler share some lineage with the Skyraider?

I've never seen this aircraft...reminds me of a P-47, AD-1, and smidge of corsair / Avenger wing.

The 3 torpedo load out, flying ASW from HMCS Magnificent in EDSG/DSG.

Offline GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: A&A Models
« Reply #52 on: November 02, 2022, 02:20:34 AM »
Did the Mauler share some lineage with the Skyraider?

It was a direct competitor to being part of the same competition that included the Curtiss XBTC, Douglas XBT2D Skyraider and Kaiser-Fleetwings BTK.

See here for more info:  https://youtu.be/INWxguRYEdc
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Kerick

  • Newly Joined - Welcome me!
Re: A&A Models
« Reply #53 on: November 02, 2022, 12:18:17 PM »
Some Maulers were issued to navy or marine reserves as I recall.

Offline elmayerle

  • Its about time there was an Avatar shown here...
  • Über Engineer...at least that is what he tells us.
Re: A&A Models
« Reply #54 on: November 14, 2022, 02:59:02 PM »
For those wanting a challenge, the Martin JR2M "Mercury", a COD version of the Mauler.

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #55 on: November 14, 2022, 11:05:24 PM »
Did the Mauler share some lineage with the Skyraider?

I've never seen this aircraft...reminds me of a P-47, AD-1, and smidge of corsair / Avenger wing.

The 3 torpedo load out, flying ASW from HMCS Magnificent in EDSG/DSG.

You were saying Graeme?

Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #56 on: November 14, 2022, 11:06:37 PM »
I see one in grey and white flying off a carrier early Vietnam.

You were saying Ken?
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline The Big Gimper

  • Any model will look better in RCAF, SEAC or FAA markings
  • Global Moderator
  • Cut. Cut. Cut. Measure. Cut. Cut. Crap. Toss.
    • Photobucket Modeling Album
Re: A&A Models
« Reply #57 on: November 14, 2022, 11:07:22 PM »
For those wanting a challenge, the Martin JR2M "Mercury", a COD version of the Mauler.

Ask and ye shall receive.
Work in progress ::

I am giving up listing them. They all end up on the shelf of procrastination anyways.

User and abuser of Bothans...

Offline KiwiZac

  • The Modeller Formerly Known As K5054NZ
Re: A&A Models
« Reply #58 on: November 15, 2022, 07:21:38 AM »
The Mauler is apparently the old Siga kit with new bits.