Beyond The Sprues

General Category => Market Place => New Model Kit News/Reviews => Topic started by: Jeffry Fontaine on January 14, 2013, 12:28:34 AM

Title: Fly
Post by: Jeffry Fontaine on January 14, 2013, 12:28:34 AM: In the box review courtesy of CyberModeler and Michael Benolkin showing off the contents of the Fly Models 1:48th scale BAC 167 Strikemaster (kit number 48015) (http://www.cybermodeler.com/hobby/kits/fly/kit_fly_48015.shtml#.UPLfAvIT98G)

Click on thumbnail or html to view.

(http://www.cybermodeler.com/hobby/kits/fly/images/fly_48015_titletn.jpg) (http://www.cybermodeler.com/hobby/kits/fly/kit_fly_48015.shtml#.UPLfAvIT98G)

Looks like you can build right out of the box as an armed trainer/COIN aircraft with four stores pylons and wing tip tanks. Stores included are four fuel tank/fire bomb shapes for keeping those pesky insurgents in line. With the individual stores pylons separate from the tank shapes you could add your own flavour of ordnance to suit your fancy.

Visit Fly Models web page (http://www.fly814.cz/en/) to see what other products are available.
Title: Re: Fly
Post by: Weaver on June 05, 2013, 07:40:10 AM: Anyone noticed this?

Avrocar VZ-9:

(http://i.ebayimg.com/t/Fly-1-72-Avrocar-VZ-9-/00/s/OTk4WDkwNw==/z/LAAAAMXQhpdRnzS0/$(KGrHqZ,!r!FGUR+BKS(BRnzSzmhSw~~60_57.JPG)

http://www.fly814.cz/news/avrocar-vz-9-72014/ (http://www.fly814.cz/news/avrocar-vz-9-72014/)
Title: Re: Fly
Post by: GTX_Admin on June 05, 2013, 08:21:38 AM: Bah! Wrong scale!

Though might make for a nice UAV in 1/35.
Title: Re: Fly
Post by: Alvis 3.1 on June 05, 2013, 11:11:31 PM: Drat, doesn't look like the Avrocar is avaialble at this point, but hey, gives me time to save up!
Those wacky Czechs, always making something new I need! :)

Alvis 3.1
Title: Re: Fly
Post by: Frank3k on June 05, 2013, 11:56:26 PM: Wow, for a 3" (76mm) dia. model, it's not cheap: http://www.megahobby.com/avrocarvz9verticaltake-offaircraft172flymodels.aspx (http://www.megahobby.com/avrocarvz9verticaltake-offaircraft172flymodels.aspx) ($37!) Sprue Bros has it for slightly less: http://store.spruebrothers.com/product_p/fly72014.htm (http://store.spruebrothers.com/product_p/fly72014.htm) ($28.99). For a couple of bucks I can probably find a suitably shaped piece of plastic...
Title: Re: Fly
Post by: GTX_Admin on July 25, 2013, 02:34:45 AM: Some interesting "In the Box" Whiffs:

(http://www.cmkkits.com/res/data/170/019311_05_082003.jpg?seek=1374591487)
(http://www.cmkkits.com/res/data/170/019307_05_081983.jpg?seek=1374591485)
(http://www.cmkkits.com/res/data/170/019306_05_081978.jpg?seek=1374591484)
Title: Re: Fly
Post by: Jeffry Fontaine on February 27, 2014, 02:15:40 AM: Bernd Heller has uploaded a in-box review of the Fly Avrocar VZ-9 (kit number 72014) (http://www.modellversium.de/kit/artikel.php?id=9720) to modellversium.de.

(http://a.modellversium.de/kit/bilder/7/2/0/9720-tumb.jpg) (http://www.modellversium.de/kit/artikel.php?id=9720)
Title: Re: Fly
Post by: Weaver on November 04, 2015, 11:26:53 AM: More for the big scale guys! 1/32nd scale Wessexes:

FLY LIMITED STOCK. MORE ARRIVING SOON!
Aircraft kits (injection)
YLF32010 1:32 Westland Wessex HC.2 £79.99 £66.66
http://www.hannants.co.uk/product/YLF32010 (http://www.hannants.co.uk/product/YLF32010)

(https://d26qn1y84zs32g.cloudfront.net/pics/YLF32010.jpg)

FLY
Aircraft kits (injection)
YLF32011 1:32 Westland Wessex HU.5 £79.99 £66.66
http://www.hannants.co.uk/product/YLF32011 (http://www.hannants.co.uk/product/YLF32011)

(https://d26qn1y84zs32g.cloudfront.net/pics/YLF32011.jpg)
Title: Re: Fly
Post by: The Big Gimper on June 21, 2017, 08:25:39 PM: 1/72 Bristol 170 Freighter coming soon. Two kits.

(https://1.bp.blogspot.com/-HJfmbNu73Ec/WUpO5ksdc8I/AAAAAAAAd2Y/HVRF0foOjgQa53gHYkEU7rEuBhpvWebnwCLcBGAs/s1600/7yrt.jpg)

72030 Bristol 170 Freighter Mk.31
(https://3.bp.blogspot.com/-gmsXVc_5msI/WUpPcGv-ZEI/AAAAAAAAd2g/eW6QQpoIgjIf95fsICF3i2Pp1vGCmd0SgCLcBGAs/s1600/9699_B.170_Mk.31M_RCAF.jpg)

72033 Bristol 170 Freighter Mk.21
(https://1.bp.blogspot.com/-FlXZr2_YEus/WUpPlwqmq8I/AAAAAAAAd2k/cowz1YJDsDIIcKvmZIj5LSHWHhXDLibbQCLcBGAs/s1600/B170-A81-1-EDN-27-2-65-J-M-Smith-KOM.jpg)

And yes Greg, right decals but wrong scale. :P
Title: Re: Fly
Post by: KiwiZac on June 22, 2017, 09:31:20 AM: Now there's a pleasant surprise! I'm up to the painting stage on my Mk.31 using the Airfix kit and Kiwi Resin conversion parts: you're all bloody welcome!! :-X
Title: Re: Fly
Post by: The Big Gimper on June 22, 2017, 09:46:08 AM: We all appreciate your sacrifice Zac. :o
Title: Re: Fly
Post by: Gingie on June 22, 2017, 11:17:39 AM: Quote from: The Big Gimper on June 21, 2017, 08:25:39 PM
1/72 Bristol 170 Freighter coming soon. Two kits.

(https://1.bp.blogspot.com/-HJfmbNu73Ec/WUpO5ksdc8I/AAAAAAAAd2Y/HVRF0foOjgQa53gHYkEU7rEuBhpvWebnwCLcBGAs/s1600/7yrt.jpg)

72030 Bristol 170 Freighter Mk.31
(https://3.bp.blogspot.com/-gmsXVc_5msI/WUpPcGv-ZEI/AAAAAAAAd2g/eW6QQpoIgjIf95fsICF3i2Pp1vGCmd0SgCLcBGAs/s1600/9699_B.170_Mk.31M_RCAF.jpg)

72033 Bristol 170 Freighter Mk.21
(https://1.bp.blogspot.com/-FlXZr2_YEus/WUpPlwqmq8I/AAAAAAAAd2k/cowz1YJDsDIIcKvmZIj5LSHWHhXDLibbQCLcBGAs/s1600/B170-A81-1-EDN-27-2-65-J-M-Smith-KOM.jpg)

And yes Greg, right decals but wrong scale. :P

woohoo!
Title: Re: Fly
Post by: elmayerle on June 22, 2017, 11:51:25 AM: I wonder how one of those would look with a lengthened fuselage and twin-Darts?
Title: Re: Fly
Post by: jcf on June 22, 2017, 12:47:42 PM: Quote from: elmayerle on June 22, 2017, 11:51:25 AM
I wonder how one of those would look with a lengthened fuselage and twin-Darts?

Like a Mk.32 Super Freighter with Darts in place of Hercules? ;)

(http://www.silvercityairways.com/Images/SiteImages/4-5_bristol_superfreighter_delivery_colours.jpg)
Title: Re: Fly
Post by: elmayerle on June 22, 2017, 12:58:08 PM: Perhaps even a stretched version of that to maintain weight and balance with the longer Darts sitting out in front, there.
Title: Re: Fly
Post by: kitnut617 on June 22, 2017, 06:35:20 PM: I've thought of that too ---

using a pair of these which are modified Dakota Dart nacelles
Title: Re: Fly
Post by: elmayerle on June 23, 2017, 12:06:02 AM: Interesting! How are you planning on positioning them? One to replace each existing Hercules and one farther out on or under the wing? I'd think that trying to do a "pull-push" installation would be a bear with those large and hot exhaust ducts.
Title: Re: Fly
Post by: kitnut617 on June 24, 2017, 08:59:47 AM: Just two Evan, but not the actual Dart the DC-3's got (only 1500shp), but a more powerful version. The nacelles I've modified and made copies of will fit on the Sunderland fire-bomber I'm building, the idea there was they got 1900+shp Darts which were eventually upgraded to some 2100+shp ones so a bigger water tank could be carried.

From what I've read the Freighter Mk.32 had 1980shp Herculese so fitting on a pair of Darts of 2500shp would do the trick I think. There are even more powerful versions in excess of 3000shp

The nacelle/engine/exhaust would look a bit like this on the Freighter too.

I thought also maybe the main gear could be retractable, sort of like a Fairey Barracuda's u/c
Title: Re: Fly
Post by: The Big Gimper on January 04, 2019, 07:59:23 PM: (https://2.bp.blogspot.com/-SxYt3H3pKio/XC5yCDHKigI/AAAAAAAAp5U/UhXk0gQPQlkv7agi8BHMpWlfo9MasgPDgCLcBGAs/s1600/49633313_2303775529633849_7729299055133589504_n.jpg)
Title: Re: Fly
Post by: KiwiZac on January 06, 2019, 11:16:48 AM: I was *this* close to finishing my Airfix + Kiwi Resin conversion to make a Mk.31 when some of the decals turned out to be the wrong size. Very disheartening.

Very jealous of those of you with the means to get the Fly kit!
Title: Re: Fly
Post by: Gingie on January 07, 2019, 06:15:48 AM: Is the freighter actually available now?
Title: Re: Fly
Post by: kitnut617 on January 07, 2019, 06:40:44 AM: Quote from: KiwiZac on January 06, 2019, 11:16:48 AM
I was *this* close to finishing my Airfix + Kiwi Resin conversion to make a Mk.31 when some of the decals turned out to be the wrong size. Very disheartening.

Very jealous of those of you with the means to get the Fly kit!

Oldmodel Decals do 1/72 Freighter decals in 1/72 Zac, they're close to you too --
Title: Re: Fly
Post by: KiwiZac on January 09, 2019, 02:55:33 AM: Those are the decals that turned out to be the wrong size. Maybe he's reworked them, but the nose decal doesn't fit the resin nose he sells.
Title: Re: Fly
Post by: kitnut617 on January 09, 2019, 03:48:47 AM: Have you tried contacting him, the time or two I had he seemed reasonable enough.

Mind you, on his website he has both 1/144 and 1/72 scale decals for the same subject and there's two different Freighter sheets for each scale
Title: Re: Fly
Post by: KiwiZac on January 12, 2019, 01:24:43 PM: The piece for the nose doors is the only bit that doesn't fit, everything else is fine. I may get in touch with him, have done before (have also suggested at least three of his current subjects). The size issue and the hardness really killed my mojo and I've not touched it in months.

Anyway. Back to the Fly kit!
Title: Re: Fly
Post by: Gingie on January 15, 2020, 09:08:33 AM: early 2020 now...

(http://i.postimg.cc/pdcMzL2h/FLY.jpg)
Title: Re: Fly
Post by: The Big Gimper on March 25, 2020, 08:42:02 PM: Almost here. Now on Hannants Future Release page. Only $70 CDN / $83 NZD. Errgh!

(https://d26qn1y84zs32g.cloudfront.net/pics/YLF72030.jpg?t=1501670773)

(https://d26qn1y84zs32g.cloudfront.net/pics/YLF72030_1.jpg?t=1501670773)

(https://d26qn1y84zs32g.cloudfront.net/pics/YLF72030_3.jpg?t=1501670773)
Title: Re: Fly
Post by: kitnut617 on March 25, 2020, 10:41:11 PM: Grrr! why oh why does that always happen, I've already built a converted one :-X
Title: Re: Fly
Post by: GTX_Admin on May 21, 2020, 03:10:34 AM: (https://kitmaker.net/photos/news/35586/001.jpg)
Title: Re: Fly
Post by: GTX_Admin on May 22, 2020, 03:30:54 AM: (https://kitmaker.net/photos/news/35588/009.jpg)
Title: Re: Fly
Post by: GTX_Admin on May 07, 2022, 02:53:34 AM: 1/48 Jet Provost T.51/52 :

(https://aeroscale.net/upload/media/entries/2022-05/06/2112-entry-0-1651841458.jpg)
(https://aeroscale.net/upload/media/entries/2022-05/06/2112-entry-2-1651841458.jpg)
Title: Re: Fly
Post by: GTX_Admin on May 08, 2022, 01:18:44 AM: 1/48 Macchi M.5:

(https://aeroscale.net/upload/media/entries/2022-05/07/2116-entry-0-1651914762.jpg)
(https://aeroscale.net/upload/media/entries/2022-05/07/2116-entry-2-1651914763.jpg)
Title: Re: Fly
Post by: GTX_Admin on April 02, 2023, 02:00:08 AM: 1/48 scale Breguet 14 A/B to be released in three editions:

(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-0-1680350238.jpg)
(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-2-1680350238.jpg)
(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-3-1680350238.jpg)

(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-4-1680350238.jpg)
(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-5-1680350238.jpg)
(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-6-1680350238.jpg)
(https://aeroscale.net/upload/media/entries/2023-04/01/3197-entry-7-1680350238.jpg)
Title: Re: Fly
Post by: Old Wombat on April 02, 2023, 07:58:14 AM: Now, that's something that might be worth recruiting into the WW1 Royal Australian Marines! :D :smiley: