Author Topic: Curtiss SOC-3 Seagull - Hasegawa 1/72  (Read 737 times)

Offline Rod The Fixer

  • Hi mates!
Curtiss SOC-3 Seagull - Hasegawa 1/72
« on: October 29, 2021, 03:59:22 AM »
Hi everyone,
I'm starting to assemble this Hasegawa kit:


by Rodolfo Masti, on Flickr

to make this aircraft:


VO-5 USS New York (BB-34) Source: Naval History and Heritage Command

The Curtiss SOC Seagull was a biplane scout-observation aircraft that operated from US battleships and cruisers throughout the Second World War and was designed as a replacement for the Vought 02U. Each battleship carried three SOC's for the primary purpose of spotting long range of its 14-inch guns.
All cruiser carried four planes units and these were primarily for scouting.
All models of the SOC were convertible from floatplanes to landsplanes and operated on wheels from naval air stations ashore when their parent ship was in port.

The Seagull was used to support several shore bombardments, including Operation Torch, the invasion of Sicily and the Salerno landings. During these operations it proved to be very vulnerable to enemy fighter aircraft.
The Seagull was in use on US cruisers during the battle of the Coral Sea (4-8 May 1942), at the battle of Midway of June 1942, and on the fleet that supported the invasion of Gaudalcanal and Tulagi in August 1942. At Midway twenty-eight Seagulls equipped Cruiser Scouting Squadrons 4, 5 and 6 (VCS-4, VCS-5 and VCS-6). During the Guadalcanal campaign Seagulls were used to try and find the Japanese ships ferrying reinforcements to the island at night (the Tokyo Express), with at least one being shot down.

A quick look inside the box:


by Rodolfo Masti, on Flickr
VO-4, Battleship USS Colorado (Land Plane Version)


 by Rodolfo Masti, on Flickr
VO-5. Battleship USS New York (Seaplane Version)


by Rodolfo Masti, on Flickr

Offline robunos

  • Can't afford the top wing of his biplanes...
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #1 on: October 29, 2021, 04:55:16 AM »
Interesting, a new release with two kits in the box. I have the 'old' boxing, with different markings, and both wheels and floats.
Looking forward to seeing what you do with this . . .


cheers,
Robin.
By the pricking of my thumbs, Something Whiff-y this way comes . . .

Offline Rod The Fixer

  • Hi mates!
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #2 on: December 05, 2021, 02:47:08 AM »
I managed to buy this little gem to detailing the engine:


by Rodolfo Masti, on Flickr

but I couldn't buy the Starfighter resin cockpit interior and so I tried to detail the cockpit, what do you think about it?


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


Offline apophenia

  • Patterns? What patterns?
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #3 on: December 05, 2021, 04:20:57 AM »
This looks excellent Rodolfo!

A few detail-y SOC-3 cockpit things come to mind ... but none that would be visible once the canopy was on. I'd say that your additions show everything you need in a 1/72 cockpit  :smiley:
The doorbell's ringing, could be the elves
But it's probably the werewolf ...

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #4 on: December 05, 2021, 06:33:16 AM »
1/72? Damned good work! :smiley:
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Rod The Fixer

  • Hi mates!
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #5 on: December 11, 2021, 12:31:18 AM »
Here is the Soc-3 Seagull seaplane embarked on the USS New York ...


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr

I applied a coat of black primer before painting it


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


Offline Rod The Fixer

  • Hi mates!
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #6 on: December 25, 2021, 01:59:52 AM »

by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #7 on: December 25, 2021, 02:03:52 AM »
Looking good
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Frank3k

  • Excession
  • Global Moderator
  • Formerly Frank2056. New upgrade!
    • My new webpage
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #8 on: December 25, 2021, 05:07:02 AM »
The canopy framing looks fantastic. Did you make the masks or are they aftermarket?

Offline apophenia

  • Patterns? What patterns?
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #9 on: December 25, 2021, 06:16:12 AM »
The canopy framing looks fantastic...

Yeah, the viewer really needs to enlarge the images to fully appreciate that  :smiley:
The doorbell's ringing, could be the elves
But it's probably the werewolf ...

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #10 on: December 25, 2021, 08:16:46 AM »
Ooh! Nice silver finish! 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Rod The Fixer

  • Hi mates!
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #11 on: January 05, 2022, 11:35:43 PM »
Plane before weathering, rigging and .... a sea of resin


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #12 on: January 06, 2022, 01:57:52 AM »
 :smiley:
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #13 on: January 06, 2022, 04:15:24 AM »
That "Show Room Shine" ... Pretty! 8) 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline Rod The Fixer

  • Hi mates!
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #14 on: January 10, 2022, 12:21:23 AM »
The Land Plane Version (VO-4, Battleship USS Colorado), is alsp ready for Weathering and rigging ...


by Rodolfo Masti, on Flickr


 by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #15 on: January 10, 2022, 01:23:36 AM »
 :smiley:
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #16 on: January 10, 2022, 01:53:48 PM »
 8)
"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."

Offline apophenia

  • Patterns? What patterns?
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #17 on: January 11, 2022, 09:49:52 AM »
And a matching pair! Very nice  :smiley:
The doorbell's ringing, could be the elves
But it's probably the werewolf ...

Offline Rod The Fixer

  • Hi mates!
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #18 on: January 16, 2022, 02:51:24 AM »
Rigging a 1/72 plane is a challenging task for my hands ...  ;)


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr


by Rodolfo Masti, on Flickr

Online GTX_Admin

  • Evil Administrator bent on taking over the Universe!
  • Administrator - Yep, I'm the one to blame for this place.
  • Whiffing Demi-God!
    • Beyond the Sprues
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #19 on: January 16, 2022, 03:07:51 AM »
That looks fantastic! :smiley:
All hail the God of Frustration!!!

You can't outrun Death forever.
But you can make the Bastard work for it.

Offline Old Wombat

  • "We'll see when I've finished whether I'm showing off or simply embarrassing myself."
  • "Define 'interesting'?"
Re: Curtiss SOC-3 Seagull - Hasegawa 1/72
« Reply #20 on: January 16, 2022, 10:04:33 PM »
I think they both look great & the rigging is excellent.


You would be grateful they weren't Airco DH.2's, Vickers FB.26's or Royal Aircraft Factory F.E.2's then, Rod. ;)





"This is the Captain. We have a little problem with our engine sequence, so we may experience some slight turbulence and, ah, explode."