Beyond The Sprues
Current and Finished Projects => Physical Models => Land => Topic started by: kpnuts on March 03, 2015, 04:31:31 AM
-
Hi all decided to start my 1/6 bike dio now I've finished the Bentley. you cant buy 1/6 figures (least not that I can find and if I did I bet they are expensive) so decided to have a go at making my own.
(http://i.imgur.com/dqv0Wm8.jpg)
-
1:6th scale? You have a large selection of 'Battle Barbie' GI Joe type Action figures in that scale to choose from. Plus there is the additional benefit of the multitude of wardrobe clothing styles with accessories. Pretty sure you can find one that will suit your needs and after you pose it on the bike you can putty over the joints and add other details.
-
Thanks for that, that will save me a lot of work.
-
Thanks for that, that will save me a lot of work.
Glad to be of some assistance. Would hate to see you carve up a perfectly good piece of wood ;)
-
Hi all as I've been informed GI Joe, Barbie, Ken and Action Man are all 1/6 so I decided to use them But I wondered if I could have made them, and how long they would have taken so,,,,
Half hour on my fret saw and 10 mins with my multi drill and I got this.
(http://i.imgur.com/Ubsw2e1.jpg)
(http://i.imgur.com/tQsFlxw.jpg)
(http://i.imgur.com/hHPu4mE.jpg)
(http://i.imgur.com/J2l0VqC.jpg)
(http://i.imgur.com/bznELeG.jpg)
(http://i.imgur.com/K0xNFEO.jpg)
(http://i.imgur.com/SO7nGKA.jpg)
so I think I could build one given a day or two (of course the head would take a while longer)
(http://i.imgur.com/pobpuSx.jpg)
(http://i.imgur.com/3xrSNZp.jpg)
(http://i.imgur.com/jqAMgsg.jpg)
-
I am impressed that you a attempting to scratchbuild a human. Looking forward to see how it comes out. I am also trying to figure out how to scratch build human. I am considering using sculpty clay or 3d printing. Good luck!
How do you get those big pictures in the post? They look bigger than the 375kb limit.
-
Tim, his images are hosted on another site (Imgur in his case) and he is putting a link
in the body of his post. This is completely different from using the 'Attachment' function.
-
Hi all here is the start of the GXS
(http://i.imgur.com/zzFxc1v.jpg)
(http://i.imgur.com/kmWNtM6.jpg)
(http://i.imgur.com/owZDeRz.jpg)
(http://i.imgur.com/UXohxTh.jpg)
(http://i.imgur.com/6JvBYkL.jpg)
(http://i.imgur.com/PwrQ89H.jpg)
(http://i.imgur.com/dNqA58b.jpg)
(http://i.imgur.com/zMVae5x.jpg)
this thing is HUGE
(http://i.imgur.com/4BR1UMS.jpg)
-
Hi all here is another update
(http://i.imgur.com/4Z0XOOe.jpg)
(http://i.imgur.com/1A7NjmF.jpg)
(http://i.imgur.com/qzYjgD4.jpg)
The master at work
(http://i.imgur.com/pMjCGKD.jpg)
(http://i.imgur.com/UkACiHJ.jpg)
(http://i.imgur.com/Vt5mynr.jpg)
(http://i.imgur.com/AABhdkW.jpg)
(http://i.imgur.com/0M7orLw.jpg)
(http://i.imgur.com/FcIv4NW.jpg)
-
Hi all first disappointing bit of the kit, The tank is a terrible fit, lots of filling, it stands out more as the rest of the kit is such a good fit.
(http://i.imgur.com/jf5jzNr.jpg)
(http://i.imgur.com/0dg9TU1.jpg)
(http://i.imgur.com/IbE71V3.jpg)
(http://i.imgur.com/OICMETu.jpg)
(http://i.imgur.com/pfP6FuQ.jpg)
(http://i.imgur.com/sqsQ9YF.jpg)
anyway back to the great fit of everything else, I have weathered the engine a bit, I dont want to weather this one much as I want it to look well cared for however the CB 750 willl be heavily weathered and have lots of broken bits.
(http://i.imgur.com/pVq2m45.jpg)
(http://i.imgur.com/IAoFK92.jpg)
(http://i.imgur.com/0493KWW.jpg)
Just to emphasise just how big this is that Virago is the same size engine as this one
(http://i.imgur.com/TVoju9u.jpg)
(http://i.imgur.com/boxMP4p.jpg)
(http://i.imgur.com/EStZe0x.jpg)
(http://i.imgur.com/M6AYMdw.jpg)
(http://i.imgur.com/LgnEuA1.jpg)
(http://i.imgur.com/zuvlH89.jpg)
(http://i.imgur.com/jYOScWn.jpg)
(http://i.imgur.com/xo976LE.jpg)
-
Hi all here is todays work
(http://i.imgur.com/c944KjG.jpg)
(http://i.imgur.com/cFPYuIj.jpg)
(http://i.imgur.com/uSLPEYm.jpg)
(http://i.imgur.com/xYxReby.jpg)
(http://i.imgur.com/oWo3Ek2.jpg)
(http://i.imgur.com/Ud4sdW5.jpg)
(http://i.imgur.com/YFngGSk.jpg)
(http://i.imgur.com/3ICDOmS.jpg)
(http://i.imgur.com/eFTFeM2.jpg)
(http://i.imgur.com/broK8dq.jpg)
(http://i.imgur.com/3j3YipG.jpg)
(http://i.imgur.com/6aJKMRu.jpg)
(http://i.imgur.com/ZWf7Wet.jpg)
(http://i.imgur.com/jTI40qz.jpg)
(http://i.imgur.com/bJVVLZE.jpg)
(http://i.imgur.com/YKi4NFs.jpg)
(http://i.imgur.com/gxFom3H.jpg)
(http://i.imgur.com/VpHUcmr.jpg)
(http://i.imgur.com/5QZWMN1.jpg)
(http://i.imgur.com/qSVJsQP.jpg)
-
Hi all really peed off sprayed the tank, had it glued to piece of stick layed it on my table hanging over the end to dry came home dinner time and it had fell off the stick and onto the carpet, (insert swear words here)
hope a coat of varnish will hide it, what do you think.
(http://i.imgur.com/1G5h43p.jpg)
(http://i.imgur.com/MMpWUBP.jpg)
(http://i.imgur.com/EdKYUup.jpg)
(http://i.imgur.com/QcgnhAq.jpg)
(http://i.imgur.com/qHqwRNt.jpg)
(http://i.imgur.com/nqLrmp9.jpg)
(http://i.imgur.com/fNbybKu.jpg)
(http://i.imgur.com/kDnPKF7.jpg)
(http://i.imgur.com/uUShNnJ.jpg)
(http://i.imgur.com/rHaM2SQ.jpg)
-
Bloody gorgeous work, there.
-
Why Thank you
Hi all here is where I am on this build
(http://i.imgur.com/YKmH5y6.jpg)
(http://i.imgur.com/xN7gj0B.jpg)
(http://i.imgur.com/m58pf7z.jpg)
(http://i.imgur.com/GkRhQdv.jpg)
(http://i.imgur.com/0aXSEqU.jpg)
(http://i.imgur.com/HRY6LMk.jpg)
(http://i.imgur.com/9ZpCFwm.jpg)
(http://i.imgur.com/sCqUjps.jpg)
(http://i.imgur.com/Y8AqRSj.jpg)
(http://i.imgur.com/yRfRTY9.jpg)
-
Yet another update, Yawn
(http://i.imgur.com/IJ5ypUW.jpg)
(http://i.imgur.com/HRzG9ce.jpg)
(http://i.imgur.com/liPRPJX.jpg)
(http://i.imgur.com/To7JnvQ.jpg)
(http://i.imgur.com/UwNLH3o.jpg)
(http://i.imgur.com/7R5Fllo.jpg)
(http://i.imgur.com/GjLIBkd.jpg)
-
Starting in this one now.
(http://i.imgur.com/o2f15t7.jpg)
I like the fact that the give you decals for several paint jobs
(http://i.imgur.com/GxLOPCD.jpg)
(http://i.imgur.com/qtFeniy.jpg)
(http://i.imgur.com/WOolunv.jpg)
(http://i.imgur.com/yNLRxEC.jpg)
(http://i.imgur.com/S5W4IJM.jpg)
(http://i.imgur.com/ZSTiMck.jpg)
(http://i.imgur.com/Ig6RxDQ.jpg)
(http://i.imgur.com/Ig6RxDQ.jpg)
(http://i.imgur.com/kdxMT4w.jpg)
(http://i.imgur.com/CTpLTy5.jpg)
(http://i.imgur.com/cNLz63u.jpg)
-
Hi all well the GSX is finished
(http://i.imgur.com/TmkLIp6.jpg)
(http://i.imgur.com/Yb0ryM8.jpg)
(http://i.imgur.com/RF7nftm.jpg)
(http://i.imgur.com/I1AqLej.jpg)
(http://i.imgur.com/9rKLH40.jpg)
(http://i.imgur.com/ksuqgzC.jpg)
(http://i.imgur.com/3byqmpF.jpg)
(http://i.imgur.com/XAI9L7v.jpg)
(http://i.imgur.com/kNvt1Hz.jpg)
(http://i.imgur.com/wP51tej.jpg)
-
Wow I bet you could fool many into thinking these are pics of the actual, full-size bike!
The paintwork, especially around the gas tank, is outstanding!
Brian da Basher
-
I'll agree with BdB, that's truly outstanding work.
-
Thank you guys glad you like it.
Hi all did some work on the CB's frame today, looking nice and rusty.
(http://i.imgur.com/wxBTSWt.jpg)
(http://i.imgur.com/NpbqTzW.jpg)
(http://i.imgur.com/M0fV5gM.jpg)
(http://i.imgur.com/AtAvI5n.jpg)
(http://i.imgur.com/uqKXW67.jpg)
(http://i.imgur.com/EUwBVul.jpg)
(http://i.imgur.com/nWo4m6N.jpg)
(http://i.imgur.com/B5GOoqZ.jpg)
(http://i.imgur.com/oLPUjjE.jpg)
(http://i.imgur.com/S7Qkfcv.jpg)
(http://i.imgur.com/MOcXg6X.jpg)
(http://i.imgur.com/XZDePuM.jpg)
(http://i.imgur.com/9t24Ekv.jpg)
(http://i.imgur.com/8OCxTaq.jpg)
(http://i.imgur.com/oP9Do4P.jpg)
-
Did some work on the engine, its been dropped this side, should I give the other side the same treatment or is that going to far, mine was only dropped on one side but I am sure they have been both sides.
(http://i.imgur.com/SwtbnNC.jpg)
(http://i.imgur.com/EMDELRE.jpg)
(http://i.imgur.com/WXPpx3b.jpg)
(http://i.imgur.com/ISRswnE.jpg)
(http://i.imgur.com/Ceyt3GM.jpg)
(http://i.imgur.com/ax0IARL.jpg)
(http://i.imgur.com/wCLuYz7.jpg)
(http://i.imgur.com/2CzuTln.jpg)
(http://i.imgur.com/Led55Qv.jpg)
-
Hi all here are some bikers clothes I've just had shipped in from china
(http://i.imgur.com/lnFUowF.jpg)
(http://i.imgur.com/IwwdVk7.jpg)
(http://i.imgur.com/kGYkcvb.jpg)
Did some work on the CB as well
(http://i.imgur.com/Y1eNIyI.jpg)
(http://i.imgur.com/CVqtHms.jpg)
(http://i.imgur.com/XTPhQYX.jpg)
(http://i.imgur.com/qONnhy3.jpg)
(http://i.imgur.com/42hr9JG.jpg)
(http://i.imgur.com/Bnkc1S6.jpg)
(http://i.imgur.com/ZhszFRf.jpg)
(http://i.imgur.com/zaLWc5L.jpg)
(http://i.imgur.com/4yOv8Jb.jpg)
(http://i.imgur.com/9FHIVoR.jpg)
(http://i.imgur.com/ceqahiE.jpg)
-
Damn, those are both very realistic and don't look like models at all.
-
And here is tonights bit
(http://i.imgur.com/sCGkuEv.jpg)
(http://i.imgur.com/NkenJOd.jpg)
(http://i.imgur.com/fS5cbXb.jpg)
(http://i.imgur.com/ju8NQmj.jpg)
(http://i.imgur.com/NSeaPxt.jpg)
(http://i.imgur.com/wx5zACZ.jpg)
(http://i.imgur.com/gp2LAmC.jpg)
-
Hi all this will be my last update till after the weekend so I've tried to do as much as pos, first I've done a bit to the dio base
(http://i.imgur.com/YbFW7sn.jpg)
(http://i.imgur.com/SxFqjNh.jpg)
(http://i.imgur.com/4aGp1cU.jpg)
(http://i.imgur.com/fIQm0Qg.jpg)
(http://i.imgur.com/Pb4vi7S.jpg)
(http://i.imgur.com/1Y9NzW4.jpg)
(http://i.imgur.com/QDdYw35.jpg)
(http://i.imgur.com/cbkGrJj.jpg)
(http://i.imgur.com/3hzSpeo.jpg)
(http://i.imgur.com/ruWuQQb.jpg)
-
Hi all back from the wedding so back to modeling this afternoon, cant wait, here are some pics of our adventure in london
(http://i.imgur.com/1RY7VlO.jpg)
(http://i.imgur.com/ARV54uE.jpg)
(http://i.imgur.com/X5NblsM.jpg)
(http://i.imgur.com/knXZwvn.jpg)
(http://i.imgur.com/gBHLUtI.jpg)
(http://i.imgur.com/ANDgowF.jpg)
Me and the missus in all our finery
(http://i.imgur.com/NwVZxFE.jpg)
I tell you what it was freezing the whole day.
-
Hi all here is todays little bit.
I decided to do an experiment I've stuck a bit of foil on the tank and I'm hoping that when ive put the top coat on when I scratch through it it will look like the metal of the tank showing through.
(http://i.imgur.com/RU8Ll9X.jpg)
also I'm trying to show the buleing effect on a chrome exhaust
(http://i.imgur.com/MtnJaTB.jpg)
(http://i.imgur.com/BV11h4X.jpg)
(http://i.imgur.com/KFSq09Z.jpg)
(http://i.imgur.com/Oxrkl4z.jpg)
(http://i.imgur.com/nJbelCQ.jpg)
(http://i.imgur.com/HKP0Tjh.jpg)
(http://i.imgur.com/RpCTGUT.jpg)
(http://i.imgur.com/TVkPe1A.jpg)
-
Hi all here is tonights update.
(http://i.imgur.com/EJpmtom.jpg)
(http://i.imgur.com/0R13i5c.jpg)
(http://i.imgur.com/onwIkiY.jpg)
(http://i.imgur.com/UMLfuPC.jpg)
(http://i.imgur.com/ShaHi6D.jpg)
(http://i.imgur.com/pNmTLHT.jpg)
(http://i.imgur.com/cRdHxhH.jpg)
(http://i.imgur.com/rED9I8C.jpg)
(http://i.imgur.com/P604xqr.jpg)
(http://i.imgur.com/ZlxtsWz.jpg)
-
These are great. I love the fact that you're doing them in a realistic "used" condition rather than showroom perfect. :)
I built a "used" Kawasaki 550 Zephyr a few years back that you might find interesting: http://www.whatifmodelers.com/index.php/topic,31997.0.html (http://www.whatifmodelers.com/index.php/topic,31997.0.html)
-
Hi all here is tonights update.
([url]http://i.imgur.com/EJpmtom.jpg[/url])
Very nice.
I miss my analog instrumentation.
-
I've been following this and I'm just amazed - they really do look like 1:1 scale motorcycles. Great work!
-
Here is tonight's episode.
(http://i.imgur.com/jQZo3LM.jpg)
(http://i.imgur.com/dNWIsEp.jpg)
(http://i.imgur.com/qHWVC2J.jpg)
(http://i.imgur.com/bjKwJMK.jpg)
(http://i.imgur.com/G66Yt8c.jpg)
(http://i.imgur.com/EQjE2lH.jpg)
(http://i.imgur.com/Ip16qMe.jpg)
(http://i.imgur.com/h9te1YR.jpg)
(http://i.imgur.com/G2BKOMl.jpg)
(http://i.imgur.com/cAtC3y0.jpg)
-
Well this has been and adventure in a place I rarely tread, that dark area of motorcycle models.
Well done so far
-
Hi all nearly there with this one, I've tried to replicate the blueing on the exhausts, have I succeeded .
(http://i.imgur.com/rYxVJpL.jpg)
(http://i.imgur.com/EjWWona.jpg)
(http://i.imgur.com/KQq0Cft.jpg)
(http://i.imgur.com/MWptWye.jpg)
(http://i.imgur.com/uPHsL6l.jpg)
(http://i.imgur.com/STXLRho.jpg)
(http://i.imgur.com/Wubc3Sm.jpg)
(http://i.imgur.com/k5aJI06.jpg)
(http://i.imgur.com/iF1qQ5L.jpg)
(http://i.imgur.com/s8KEca8.jpg)
(http://i.imgur.com/YHbejEy.jpg)
(http://i.imgur.com/0Xad2ky.jpg)
-
Hi all nearly there.
(http://i.imgur.com/9VuMMXt.jpg)
(http://i.imgur.com/JNfCA1p.jpg)
(http://i.imgur.com/0ygGat9.jpg)
(http://i.imgur.com/hhcGa1X.jpg)
(http://i.imgur.com/rkpSw6u.jpg)
(http://i.imgur.com/YlxnrY9.jpg)
(http://i.imgur.com/Lbqqlnm.jpg)
(http://i.imgur.com/4rRjs3c.jpg)
-
Wow! Great forced perspective!
-
Hi all I know you were expecting this finished tonight but I am sitting here with such a stiff neck I can hardly move, it's been coming on the last couple of days, hopefully tomorrow but if it gets any worse I doubt I will get out of bed
-
Hi all well i'm calling this done
(http://i.imgur.com/VVNzvX9.jpg)
(http://i.imgur.com/BqivFTx.jpg)
(http://i.imgur.com/MCJb5DI.jpg)
(http://i.imgur.com/YfaROQT.jpg)
(http://i.imgur.com/49KVZQQ.jpg)
(http://i.imgur.com/Sa7ZuWY.jpg)
(http://i.imgur.com/Ldd6dIR.jpg)
(http://i.imgur.com/tkRqPnF.jpg)
(http://i.imgur.com/1kV7str.jpg)
(http://i.imgur.com/zLYnzz2.jpg)
(http://i.imgur.com/y7vAoCp.jpg)
(http://i.imgur.com/IAB2bcx.jpg)
(http://i.imgur.com/A3dIl6w.jpg)
(http://i.imgur.com/hl9kYxm.jpg)
(http://i.imgur.com/hWGrZpZ.jpg)
-
This guy is a real MASTER! :icon_alabanza: :icon_alabanza:
-
Hardly, but thanks for the compliment
-
This guy is a real MASTER! :icon_alabanza: :icon_alabanza:
I second that!! Excellent work! :icon_alabanza:
-
Definitely thirded! :icon_alabanza: