Beyond The Sprues
Current and Finished Projects => Physical Models => Land => Topic started by: kpnuts on October 25, 2020, 01:31:12 AM
-
Hi all got this for my birthday, I'm well impressed, the instruction manual is a thing of beauty I've never seen one like it before.
It is full of history and information also loads of beautiful pictures of the cars this engine was in.
The actual instructions make up about a third of the manual and are also beautifully printed and clear to follow.
The box is huge, good quality and stuffed to the brimm with high quality plastic.
I'm intending to build this as half see through rather than completely see through as is intended with the kit
(https://i.ibb.co/gzdfnqR/IMG-4546.jpg)
(https://i.ibb.co/wNpD3k0/IMG-4545.jpg)
(https://i.ibb.co/v4fJLKF/IMG-4548.jpg)
(https://i.ibb.co/x6fV1Pp/IMG-4547.jpg)
(https://i.ibb.co/QX4HkY8/IMG-4551.jpg)
(https://i.ibb.co/4Nrj7fj/IMG-4550.jpg)
(https://i.ibb.co/sqyv146/IMG-4549.jpg)
-
So I've started the crankshaft and pistons
(https://i.ibb.co/XxWxQ5F/IMG-4634.jpg)
(https://i.ibb.co/L1sDPyy/IMG-4633.jpg)
(https://i.ibb.co/XpCFTfx/IMG-4640.jpg)
(https://i.ibb.co/NZ8hcD4/IMG-4639.jpg)
(https://i.ibb.co/d0pRxyX/IMG-4626.jpg)
I've built the casings of the half I'm going to paint, we have a machine at work called a vapour blaster which we use to clean engine parts which I'm hoping to use to give these parts a cast look (it uses tiny glass beads and is only supposed to remove 30 microns on metal parts will try it on a piece of sprue first)
(https://i.ibb.co/5c4hQBS/IMG-4636.jpg)
(https://i.ibb.co/476qTbv/IMG-4638.jpg)
(https://i.ibb.co/jZHRTxW/IMG-4635.jpg)
-
Hi all more work on the engine, im certainly getting a lot of practice creating metal effects on this one.
(https://i.ibb.co/bW5MC1x/IMG-4663.jpg)
(https://i.ibb.co/DtdPZWC/IMG-4664.jpg)
(https://i.ibb.co/KK8zdGK/IMG-4665.jpg)
(https://i.ibb.co/XyY6wWZ/IMG-4666.jpg)
(https://i.ibb.co/Rh9CtGS/IMG-4669.jpg)
(https://i.ibb.co/BrvcWSj/IMG-4668.jpg)
-
Terrific job! Your metal effects sure fooled me. I thought those were real metal parts.
-
Hi all one of the advantages of having a 547 engine completely dismantled at work is loads of reference material, for instance this main drive gear should have 6 30 mm holes in it, 1/3 equates to 10 mm
(https://i.ibb.co/R3k2f7s/IMG-4684.jpg)
(https://i.ibb.co/fthqnBL/IMG-4685.jpg)
I also took the half I'm painting aluminium to work to vapour blast it (for a cast effect)
(https://i.ibb.co/BcnXqrg/IMG-4683.jpg)
(https://i.ibb.co/pJfdk0G/IMG-4686.jpg)
(https://i.ibb.co/tKGYRJf/IMG-4682.jpg)
And the first coat of the casting effect
(https://i.ibb.co/SNQ55nS/IMG-4696.jpg)
(https://i.ibb.co/V0ybX29/IMG-4695.jpg)
(https://i.ibb.co/xJTDKCf/IMG-4694.jpg)
(https://i.ibb.co/9vwPNYz/IMG-4693.jpg)
(https://i.ibb.co/SPvHTnN/IMG-4692.jpg)
-
DON'T BELIEVE IT, RAMBA! :o
It's well known that Mr kpnuts takes pictures of the real thing & photoshops them to look like model parts! ;)
Well, done. mate! As Ramba said (& as usual) looks real! :smiley:
-
More work on this, been adding a few bit of discolouration to the ally side, got a bit more work to do on those effects yet.
(https://i.ibb.co/tpSqc99/IMG-4713.jpg)
(https://i.ibb.co/F4sNGhn/IMG-4714.jpg)
(https://i.ibb.co/mCccbr9/IMG-4711.jpg)
(https://i.ibb.co/c1rghNs/IMG-4710.jpg)
(https://i.ibb.co/9Nkqb6r/IMG-4709.jpg)
(https://i.ibb.co/4Wc8sfM/IMG-4708.jpg)
(https://i.ibb.co/ZVPMYGq/IMG-4715.jpg)
(https://i.ibb.co/4VXxmxJ/IMG-4706.jpg)
Still loads more bits in the box.
(https://i.ibb.co/09VBR9C/IMG-4712.jpg)
-
:smiley:
-
Well there is a kit I did not know existed. Certainly not my cup of tea, but the work you are doing is really good.
Also intrigued by the tartan backdrop. Blanket or trews ?
-
Trews
-
Well I've got the valves installed worked some more on the casings getting happier with the results (I think maybe its too shiny needs dulling down a bit) I don't want to make it look grubby just weather worn and aged.
(https://i.ibb.co/thBh3DM/IMG-4723.jpg)
(https://i.ibb.co/5Fh1Xt3/IMG-4728.jpg)
(https://i.ibb.co/VVmY7Y6/IMG-4729.jpg)
(https://i.ibb.co/LPL63KK/IMG-4727.jpg)
(https://i.ibb.co/fpw6kRk/IMG-4725.jpg)
(https://i.ibb.co/CnPjKdk/IMG-4724.jpg)
-
Well I've got the valves installed worked some more on the casings getting happier with the results (I think maybe its too shiny needs dulling down a bit) I don't want to make it look grubby just weather worn and aged.
(https://i.ibb.co/thBh3DM/IMG-4723.jpg)
(https://i.ibb.co/5Fh1Xt3/IMG-4728.jpg)
(https://i.ibb.co/VVmY7Y6/IMG-4729.jpg)
(https://i.ibb.co/LPL63KK/IMG-4727.jpg)
(https://i.ibb.co/fpw6kRk/IMG-4725.jpg)
(https://i.ibb.co/CnPjKdk/IMG-4724.jpg)
https://youtu.be/wG8IpL55tx4
-
Hi all more work on the valve gear
(https://i.ibb.co/f8t1cZ3/IMG-20201030-31623.jpg)
(https://i.ibb.co/B4GghpY/IMG-20201030-31376.jpg)
https://youtu.be/wG8IpL55tx4
-
Hi all started on the exhaust down pipes (dosent really show in the pics)
I tried an experiment with metal effects on the exhaust as I didn't want it to look the same as the engine and im really pleased with the look of them.
(https://i.ibb.co/85qRGgC/IMG-4745.jpg)
(https://i.ibb.co/yP682kj/IMG-4746.jpg)
(https://i.ibb.co/dbSWbCp/IMG-4759.jpg)
(https://i.ibb.co/2vSpQzc/IMG-20201031-193836-499.jpg)
(https://i.ibb.co/rsNkH7Y/IMG-20201031-193836-501.jpg)
-
:smiley:
-
Got the exhaust on and more experimental metal effects, a word of warning to anyone building this kit and painting parts of it the black shiny plastic is of a different type of plastic to the rest of the kit I sprayed the cowl for the fan (with the same type of paint used everywhere else) the plastic on the cowl has crazed and cracked (and that's even with using plastic safe primer) im hoping a layer of filler sanded down then sprayed over will fix it.
(https://i.ibb.co/QfXG2rr/IMG-20201101-174345-215.jpg)
(https://i.ibb.co/DRGK438/IMG-20201101-174345-217.jpg)
(https://i.ibb.co/R7pZ45J/IMG-20201101-174345-218.jpg)
(https://i.ibb.co/t32xRc0/IMG-20201101-174345-239.jpg)
(https://i.ibb.co/VVWrtgZ/IMG-20201101-174345-238.jpg)
-
Nearing completion now.
(https://i.ibb.co/XpMrZtg/IMG-4780.jpg)
(https://i.ibb.co/dDtK3sH/IMG-4781.jpg)
(https://i.ibb.co/gzVVkvT/IMG-4782.jpg)
(https://i.ibb.co/FH1R6Hn/IMG-4783.jpg)
(https://i.ibb.co/SdwWvJG/IMG-4784.jpg)
(https://i.ibb.co/T0Z8JrB/IMG-4785.jpg)
(https://i.ibb.co/wSgXSLS/IMG-4787.jpg)
(https://i.ibb.co/mDXZvRM/IMG-4786.jpg)
-
:smiley:
-
Well its done (the supplied belt is too tight making the top pully bind and stopping it)
(https://i.ibb.co/t4rmRn8/IMG-4802.jpg)
(https://i.ibb.co/b5SbXcW/IMG-4801.jpg)
(https://i.ibb.co/b2WnWq1/IMG-4800.jpg)
(https://i.ibb.co/Nx1nGb4/IMG-4799.jpg)
(https://i.ibb.co/RDd12Xt/IMG-4794.jpg)
(https://i.ibb.co/7tMPh29/IMG-4798.jpg)
-
Damn, that's an impressive build! Beautiful work!
-
Damn, that's an impressive build! Beautiful work!
Yes it is :smiley:
Could it be that shrink ray guns are getting better ?
-
Terrific work.
Now all you need is a can of this ;)
(https://www.nulon.com.au/imagecached/large/files/aerosol/SYB350.jpg)
-
Ha ha