Beyond The Sprues
Current and Finished Projects => Physical Models => Aero-space => Topic started by: Rod The Fixer on January 03, 2019, 06:33:32 AM
-
Hi mates,
i'm assembling this 1/144 Amodel kit:
(https://i.imgur.com/8F3Sbgh.jpg)
(https://i.imgur.com/6FDgnFw.jpg)
(https://i.imgur.com/DW3oFyC.jpg)
(https://i.imgur.com/ehhTnU8.jpg)
(https://i.imgur.com/1evQ7hC.jpg)
(https://i.imgur.com/HTolqvu.jpg)
The Beriev Be-10, also known as Izdelye M, (NATO reporting name: Mallow) was a twin engined, turbojet powered, flying-boat, patrol bomber built by the Soviet Union from 1955.
The Be-10 is an all-metal high-wing monoplane with the engines located beneath the wing roots and with splayed-out tailpipes. To minimize the risk of water ingestion, the engine air intakes are located on the forward fuselage section with spray fences on either side of the bow protecting the engines from water ingestion.
The fuselage was a two step design with a high length to beam ratio to improve rough water handling, v-section planing bottom, two steps and was divided into nine water-tight compartments the forward and rear compartments being pressurised. Engine nacelles for the Lyul'ka AL-7F engines were attached to the fuselage sides under the wing centre-section.
Initial assembling steps:
(https://i.imgur.com/9U9CPoc.jpg)
(https://i.imgur.com/02BLdJ5.jpg)
(https://i.imgur.com/gbjcAEa.jpg)
(https://i.imgur.com/3pBrAKp.jpg)
(https://i.imgur.com/oRXa7wF.jpg)
First layer of primer
(https://i.imgur.com/qqwaUul.jpg)
(https://i.imgur.com/TBAvYg5.jpg)
(https://i.imgur.com/DCmAM1e.jpg)
(https://i.imgur.com/FTSljiQ.jpg)
-
That looks fantastic, for an AModel kit. I love their subjects, but building their kits is never easy.
-
Very nice so far, I'll look forward to the finished model ;)
-
Every time I see on of these flying boats I imagine it painted yellow and doing a water drop.
-
Looking good - what scheme are you planning?
-
Ahh that's just great! There can never be enough jet flying boats if you ask me.
Welcome to BtS! With projects like this, you fit right in!
Brian da Basher
-
Hi mates, little weathering :
(https://i.imgur.com/IQV0hfv.jpg)
(https://i.imgur.com/n1AH8Nw.jpg)
(https://i.imgur.com/o2tbNwq.jpg)
(https://i.imgur.com/bdwhOpX.jpg)
I'm planning to make this plane:
(http://www.airwar.ru/image/idop/sea/be10/be10-11.jpg)
floating in a trasparent resin sea ... ;)
-
Looking good.
-
Floating in the sea sounds like a great idea. A little wake at the bow and some turbulence from the jet exhaust?
-
beautiful flying boat shape !
-
Plane ready for the sea ...
(https://i.imgur.com/gRAMHkv.jpg)
(https://i.imgur.com/EUHSqfP.jpg)
(https://i.imgur.com/bHoenHG.jpg)
(https://i.imgur.com/oaqrtCy.jpg)
(https://i.imgur.com/72VawkP.jpg)
(https://i.imgur.com/uqLRKCG.jpg)
(https://i.imgur.com/qhj0HFC.jpg)
-
That is some flying boat. 8)
-
Love the look of Soviet flying boats & ekranoplans. :smiley:
-
And at last ... in the water :smiley:
(https://farm8.staticflickr.com/7835/45886833595_e3c419f902_b.jpg) (https://flic.kr/p/2cUS1Xn)Be-10_501 (https://flic.kr/p/2cUS1Xn) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm5.staticflickr.com/4912/45886833125_8062a07285_b.jpg) (https://flic.kr/p/2cUS1Pg)Be-10_502 (https://flic.kr/p/2cUS1Pg) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm8.staticflickr.com/7909/31860315467_a0cb6423f8_b.jpg) (https://flic.kr/p/QxorMV)Be-10_503 (https://flic.kr/p/QxorMV) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm8.staticflickr.com/7813/46749517032_1e47435a3e_b.jpg) (https://flic.kr/p/2ee6uFJ)Be-10_504 (https://flic.kr/p/2ee6uFJ) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm5.staticflickr.com/4811/46802149181_13db0530f2_b.jpg) (https://flic.kr/p/2eiKfoz)Be-10_505 (https://flic.kr/p/2eiKfoz) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm8.staticflickr.com/7897/31860315267_f6d3be8bda_b.jpg) (https://flic.kr/p/QxorJt)Be-10_506 (https://flic.kr/p/QxorJt) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm5.staticflickr.com/4831/46749516012_22e762aaa9_b.jpg) (https://flic.kr/p/2ee6uo9)Be-10_507 (https://flic.kr/p/2ee6uo9) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
(https://farm8.staticflickr.com/7868/45886831095_08c3d76432_b.jpg) (https://flic.kr/p/2cUS1dg)Be-10_511 (https://flic.kr/p/2cUS1dg) by Rodolfo Masti (https://www.flickr.com/photos/162582329@N03/), su Flickr
-
:smiley:
-
:smiley: :smiley:
-
:smiley: :smiley: :smiley:
-
Beautifque!! That's downright gorgeous work, there, both the model and the base.
-
Blow me away beyond the call of duty build. WOW :-*
-
That looks gorgeous! On top of that, it's an AModel kit - AModel veterans know how difficult it can be to get a decent looking finished product, yet you made it look easy!
-
That's really hot!
Talk about a heckuva introduction!
Great stuff.
Brian da Basher
-
Beautifque!! That's downright gorgeous work, there, both the model and the base.
I'll go with this one, what more could you say?! :smiley: :smiley: